Motorola WR850G v4.03 Credentials - Metasploit


This page contains detailed information about how to use the auxiliary/admin/motorola/wr850g_cred metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.

Table Of Contents
hide

Module Overview

Name: Motorola WR850G v4.03 Credentials
Module: auxiliary/admin/motorola/wr850g_cred
Source code: modules/auxiliary/admin/motorola/wr850g_cred.rb
Disclosure date: 2004-09-24
Last modification time: 2020-10-02 17:38:06 +0000
Supported architecture(s): -
Supported platform(s): -
Target service / protocol: -
Target network port(s): 80
List of CVEs: CVE-2004-1550

Login credentials to the Motorola WR850G router with firmware v4.03 can be obtained via a simple GET request if issued while the administrator is logged in. A lot more information is available through this request, but you can get it all and more after logging in.

Module Ranking and Traits

Module Ranking:

  • normal: The exploit is otherwise reliable, but depends on a specific version and can't (or doesn't) reliably autodetect. More information about ranking can be found here.

Basic Usage

msf > use auxiliary/admin/motorola/wr850g_cred
msf auxiliary(wr850g_cred) > show targets
    ... a list of targets ...
msf auxiliary(wr850g_cred) > set TARGET target-id
msf auxiliary(wr850g_cred) > show options
    ... show and set options ...
msf auxiliary(wr850g_cred) > exploit

Required Options

  • RHOSTS: The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'

Go back to menu.

Msfconsole Usage

Here is how the admin/motorola/wr850g_cred auxiliary module looks in the msfconsole:

msf6 > use auxiliary/admin/motorola/wr850g_cred

msf6 auxiliary(admin/motorola/wr850g_cred) > show info

       Name: Motorola WR850G v4.03 Credentials
     Module: auxiliary/admin/motorola/wr850g_cred
    License: Metasploit Framework License (BSD)
       Rank: Normal
  Disclosed: 2004-09-24

Provided by:
  kris katterjohn <[email protected]>

Check supported:
  No

Basic options:
  Name    Current Setting  Required  Description
  ----    ---------------  --------  -----------
  RHOSTS                   yes       The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
  RPORT   80               yes       The target port (TCP)

Description:
  Login credentials to the Motorola WR850G router with firmware v4.03 
  can be obtained via a simple GET request if issued while the 
  administrator is logged in. A lot more information is available 
  through this request, but you can get it all and more after logging 
  in.

References:
  https://nvd.nist.gov/vuln/detail/CVE-2004-1550
  OSVDB (10232)
  https://seclists.org/bugtraq/2004/Sep/0339.html

Module Options

This is a complete list of options available in the admin/motorola/wr850g_cred auxiliary module:

msf6 auxiliary(admin/motorola/wr850g_cred) > show options

Module options (auxiliary/admin/motorola/wr850g_cred):

   Name    Current Setting  Required  Description
   ----    ---------------  --------  -----------
   RHOSTS                   yes       The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
   RPORT   80               yes       The target port (TCP)

Advanced Options

Here is a complete list of advanced options supported by the admin/motorola/wr850g_cred auxiliary module:

msf6 auxiliary(admin/motorola/wr850g_cred) > show advanced

Module advanced options (auxiliary/admin/motorola/wr850g_cred):

   Name            Current Setting  Required  Description
   ----            ---------------  --------  -----------
   CHOST                            no        The local client address
   CPORT                            no        The local client port
   ConnectTimeout  10               yes       Maximum number of seconds to establish a TCP connection
   Proxies                          no        A proxy chain of format type:host:port[,type:host:port][...]
   SSL             false            no        Negotiate SSL/TLS for outgoing connections
   SSLCipher                        no        String for SSL cipher - "DHE-RSA-AES256-SHA" or "ADH"
   SSLVerifyMode   PEER             no        SSL verification method (Accepted: CLIENT_ONCE, FAIL_IF_NO_PEER_CERT, NONE, PEER)
   SSLVersion      Auto             yes       Specify the version of SSL/TLS to be used (Auto, TLS and SSL23 are auto-negotiate) (Accepted: Auto, TLS, SSL23, SSL3, TLS1, TLS1.1, TLS1.2)
   VERBOSE         false            no        Enable detailed status messages
   WORKSPACE                        no        Specify the workspace for this module

Auxiliary Actions

This is a list of all auxiliary actions that the admin/motorola/wr850g_cred module can do:

msf6 auxiliary(admin/motorola/wr850g_cred) > show actions

Auxiliary actions:

   Name  Description
   ----  -----------

Evasion Options

Here is the full list of possible evasion options supported by the admin/motorola/wr850g_cred auxiliary module in order to evade defenses (e.g. Antivirus, EDR, Firewall, NIDS etc.):

msf6 auxiliary(admin/motorola/wr850g_cred) > show evasion

Module evasion options:

   Name                Current Setting  Required  Description
   ----                ---------------  --------  -----------
   TCP::max_send_size  0                no        Maxiumum tcp segment size.  (0 = disable)
   TCP::send_delay     0                no        Delays inserted before every send.  (0 = disable)

Go back to menu.

Error Messages

This module may fail with the following error messages:

Error Messages

Check for the possible causes from the code snippets below found in the module source code. This can often times help in identifying the root cause of the problem.

No response from server

Here is a relevant code snippet related to the "No response from server" error message:

37:	    response = sock.get_once
38:	
39:	    disconnect
40:	
41:	    if response.nil? or response.empty?
42:	      print_status("No response from server")
43:	      return
44:	    end
45:	
46:	    # 302 Redirect
47:	    if response.split(/\r\n/)[0] !~ /200 Ok/

Administrator not logged in

Here is a relevant code snippet related to the "Administrator not logged in" error message:

43:	      return
44:	    end
45:	
46:	    # 302 Redirect
47:	    if response.split(/\r\n/)[0] !~ /200 Ok/
48:	      print_status("Administrator not logged in")
49:	      return
50:	    end
51:	
52:	    user = $1 if response.match("http_username=([^\n]*)<br>")
53:	    pass = $1 if response.match("http_passwd=([^\n]*)<br>")

Go back to menu.

References

See Also

Check also the following modules related to this module:

Authors

kris katterjohn

Version

This page has been produced using Metasploit Framework version 6.1.24-dev. For more modules, visit the Metasploit Module Library.

Go back to menu.