Juniper Configuration Importer - Metasploit
This page contains detailed information about how to use the auxiliary/admin/networking/juniper_config metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.
Module Overview
Name: Juniper Configuration Importer
Module: auxiliary/admin/networking/juniper_config
Source code: modules/auxiliary/admin/networking/juniper_config.rb
Disclosure date: -
Last modification time: 2021-08-27 17:15:33 +0000
Supported architecture(s): -
Supported platform(s): -
Target service / protocol: -
Target network port(s): 22
List of CVEs: -
This module imports a Juniper ScreenOS or JunOS device configuration.
Module Ranking and Traits
Module Ranking:
- normal: The exploit is otherwise reliable, but depends on a specific version and can't (or doesn't) reliably autodetect. More information about ranking can be found here.
Basic Usage
msf > use auxiliary/admin/networking/juniper_config
msf auxiliary(juniper_config) > show targets
... a list of targets ...
msf auxiliary(juniper_config) > set TARGET target-id
msf auxiliary(juniper_config) > show options
... show and set options ...
msf auxiliary(juniper_config) > exploit
Required Options
CONFIG: Path to configuration to import
RHOSTS: The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
Knowledge Base
Vulnerable Application
General Notes
This module imports a Juniper configuration file into the database.
This is similar to post/networking/gather/enum_juniper only access isn't required,
and assumes you already have the file.
Example Configs
JunOS
## Last commit: 2016-08-15 13:35:48 UTC by root
version 12.3R7.7;
system {
host-name h00dieJuniperEx2200;
root-authentication {
encrypted-password "$1$pz9b1.fq$foo5r85Ql8mXdoRUe0C1E."; ## SECRET-DATA
}
login {
user newuser {
uid 2000;
class super-user;
authentication {
encrypted-password "$1$rm8FaMFY$k4LFxqsVAiGO5tKqyO9jJ/"; ## SECRET-DATA
}
}
user newuser2 {
uid 2002;
class operator;
authentication {
encrypted-password "$1$aDZi44AP$bQGGjqPJ.F.Cm5QvX2yaa0"; ## SECRET-DATA
}
}
user newuser3 {
uid 2003;
class read-only;
authentication {
encrypted-password "$1$1.YvKzUY$dcAj99KngGhFZTpxGjA93."; ## SECRET-DATA
}
}
user newuser4 {
uid 2004;
class unauthorized;
authentication {
encrypted-password "$1$bdWYaqOE$z6oTSJS3p1R8CoNaos9Ce/"; ## SECRET-DATA
}
}
}
services {
ssh {
root-login allow;
}
web-management {
http;
}
dhcp {
traceoptions {
file dhcp_logfile;
level all;
flag all;
}
pool 192.168.10.0/24 {
address-range low 192.168.10.2 high 192.168.10.254;
}
}
}
syslog {
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
}
chassis {
alarm {
management-ethernet {
link-down ignore;
}
}
auto-image-upgrade;
}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.1.3/32;
}
}
}
ge-0/0/1 {
unit 0 {
family inet {
address 192.168.1.4/32;
}
}
}
ge-0/0/2 {
unit 0 {
family inet {
address 192.168.1.5/24;
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/5 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/7 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/8 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/9 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/11 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/12 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/13 {
unit 0 {
## Last commit: 2016-08-15 13:35:48 UTC by root
version 12.3R7.7;
system {
host-name h00dieJuniperEx2200;
root-authentication {
encrypted-password "$1$pz9b1.fq$foo5r85Ql8mXdoRUe0C1E."; ## SECRET-DATA
}
login {
user newuser {
uid 2000;
class super-user;
authentication {
encrypted-password "$1$rm8FaMFY$k4LFxqsVAiGO5tKqyO9jJ/"; ## SECRET-DATA
}
}
user newuser2 {
uid 2002;
class operator;
authentication {
encrypted-password "$1$aDZi44AP$bQGGjqPJ.F.Cm5QvX2yaa0"; ## SECRET-DATA
}
}
user newuser3 {
uid 2003;
class read-only;
authentication {
encrypted-password "$1$1.YvKzUY$dcAj99KngGhFZTpxGjA93."; ## SECRET-DATA
}
}
user newuser4 {
uid 2004;
class unauthorized;
authentication {
encrypted-password "$1$bdWYaqOE$z6oTSJS3p1R8CoNaos9Ce/"; ## SECRET-DATA
}
}
}
services {
ssh {
root-login allow;
}
web-management {
http;
}
dhcp {
traceoptions {
file dhcp_logfile;
level all;
flag all;
}
pool 192.168.10.0/24 {
address-range low 192.168.10.2 high 192.168.10.254;
}
}
}
syslog {
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
}
chassis {
alarm {
management-ethernet {
link-down ignore;
}
}
auto-image-upgrade;
}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.1.3/32;
}
}
}
ge-0/0/1 {
unit 0 {
family inet {
address 192.168.1.4/32;
}
}
}
ge-0/0/2 {
unit 0 {
family inet {
address 192.168.1.5/24;
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/5 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/7 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/8 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/9 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/11 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/12 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/13 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/14 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/15 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/16 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/17 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/18 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/19 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/20 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/21 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/22 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/23 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/24 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/25 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/26 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/27 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/28 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/29 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/30 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/31 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/32 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/33 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/34 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/35 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/36 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/37 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/38 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/39 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/40 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/41 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/42 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/43 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/44 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/45 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/46 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/47 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/0 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/1 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/2 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/3 {
unit 0 {
family ethernet-switching;
}
}
me0 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
pp0 {
unit 0 {
ppp-options {
pap {
local-name "'pap_username'";
local-password "$9$he4revM87-dsevm5TQCAp0BErvLxd4JDNdkPfT/9BIR"; ## SECRET-DATA
}
}
}
}
st0 {
unit 1;
}
vlan {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-ex2200-48t-4g;
}
}
}
}
}
snmp {
name "snmp name";
description "snmp description";
location basement;
contact admin;
view jweb-view-all {
oid .1 include;
}
community read {
authorization read-only;
}
community write {
view jweb-view-all;
authorization read-write;
}
community public {
authorization read-only;
}
community private {
authorization read-write;
}
community secretsauce {
authorization read-write;
}
community "hello there" {
authorization read-write;
}
}
routing-options {
static {
route 0.0.0.0/0 next-hop 192.168.1.254;
}
}
protocols {
igmp-snooping {
vlan all;
}
rstp;
lldp {
interface all;
}
lldp-med {
interface all;
}
}
access {
radius-server {
1.1.1.1 secret "$9$Y-4GikqfF39JGCu1Ileq.PQ6AB1hrlMBIyKvWdV"; ## SECRET-DATA
}
}
ethernet-switching-options {
storm-control {
interface all;
}
}
vlans {
default {
l3-interface vlan.0;
}
} family ethernet-switching;
}
}
ge-0/0/14 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/15 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/16 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/17 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/18 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/19 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/20 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/21 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/22 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/23 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/24 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/25 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/26 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/27 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/28 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/29 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/30 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/31 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/32 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/33 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/34 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/35 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/36 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/37 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/38 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/39 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/40 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/41 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/42 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/43 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/44 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/45 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/46 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/47 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/0 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/1 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/2 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/3 {
unit 0 {
family ethernet-switching;
}
}
me0 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
pp0 {
unit 0 {
ppp-options {
pap {
local-name "'pap_username'";
local-password "$9$he4revM87-dsevm5TQCAp0BErvLxd4JDNdkPfT/9BIR"; ## SECRET-DATA
}
}
}
}
st0 {
unit 1;
}
vlan {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-ex2200-48t-4g;
}
}
}
}
}
snmp {
name "snmp name";
description "snmp description";
location basement;
contact admin;
view jweb-view-all {
oid .1 include;
}
community read {
authorization read-only;
}
community write {
view jweb-view-all;
authorization read-write;
}
community public {
authorization read-only;
}
community private {
authorization read-write;
}
community secretsauce {
authorization read-write;
}
community "hello there" {
authorization read-write;
}
}
routing-options {
static {
route 0.0.0.0/0 next-hop 192.168.1.254;
}
}
protocols {
igmp-snooping {
vlan all;
}
rstp;
lldp {
interface all;
}
lldp-med {
interface all;
}
}
access {
radius-server {
1.1.1.1 secret "$9$Y-4GikqfF39JGCu1Ileq.PQ6AB1hrlMBIyKvWdV"; ## SECRET-DATA
}
}
ethernet-switching-options {
storm-control {
interface all;
}
}
vlans {
default {
l3-interface vlan.0;
}
}
ScreenOS
unset key protection enable
set clock timezone 0
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set alg appleichat enable
unset alg appleichat re-assembly enable
set alg sctp enable
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "netscreen"
set admin password "nKVUM2rwMUzPcrkG5sWIHdCtqkAibn"
set admin auth web timeout 10
set admin auth dial-in timeout 3
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst
set zone "Untrust" block
unset zone "Untrust" tcp-rst
set zone "MGT" block
unset zone "V1-Trust" tcp-rst
unset zone "V1-Untrust" tcp-rst
set zone "DMZ" tcp-rst
unset zone "V1-DMZ" tcp-rst
unset zone "VLAN" tcp-rst
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet0/0" zone "Untrust"
set interface "ethernet0/1" zone "DMZ"
set interface "bgroup0" zone "Trust"
set interface bgroup0 port ethernet0/2
set interface bgroup0 port ethernet0/3
set interface bgroup0 port ethernet0/4
set interface bgroup0 port ethernet0/5
set interface bgroup0 port ethernet0/6
unset interface vlan1 ip
set interface bgroup0 ip 192.168.1.1/24
set interface bgroup0 nat
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface bgroup0 ip manageable
set interface ethernet0/0 dhcp client enable
set interface ethernet0/0 dhcp client settings autoconfig
set interface "serial0/0" modem settings "USR" init "AT&F"
set interface "serial0/0" modem settings "USR" active
set interface "serial0/0" modem speed 115200
set interface "serial0/0" modem retry 3
set interface "serial0/0" modem interval 10
set interface "serial0/0" modem idle-time 10
set ip tftp retry 30
set ip tftp timeout 30
set flow tcp-mss
unset flow no-tcp-seq-check
set flow tcp-syn-check
unset flow tcp-syn-bit-check
set flow reverse-route clear-text prefer
set flow reverse-route tunnel always
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set user "testuser" uid 1
set user "testuser" type auth
set user "testuser" hash-password "02b0jt2gZGipCiIEgl4eainqZIKzjSNQYLIwE="
set user "testuser" enable
set crypto-policy
exit
set ike respond-bad-spi 1
set ike ikev2 ike-sa-soft-lifetime 60
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set url protocol websense
exit
set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit
set policy id 1
exit
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set config lock timeout 5
unset license-key auto-update
set telnet client enable
set snmp port listen 161
set snmp port trap 162
set snmpv3 local-engine id "0162122013002408"
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset add-default-route
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit
Verification Steps
- Have a Juniper configuration file
- Start
msfconsole use auxiliary/admin/networking/juniper_configset RHOST x.x.x.xset CONFIG /tmp/file.configset action junosrun
Options
RHOST
Needed for setting services and items to. This is relatively arbitrary.
CONFIG
File path to the configuration file.
Action
JUNOS for JunOS config file, and SCREENOS for ScreenOS config file.
Scenarios
JunOS
root@metasploit-dev:~/metasploit-framework# wget -o /dev/null -O /tmp/juniper_ex2200.config https://raw.githubusercontent.com/h00die/MSF-Testing-Scripts/master/juniper_ex2200.config
root@metasploit-dev:~/metasploit-framework# ./msfconsole
[*] Starting persistent handler(s)...
msf5 > use auxiliary/admin/networking/gather/juniper_config
msf5 auxiliary(admin/networking/gather/juniper_config) > set config /tmp/juniper_ex2200.config
config => /tmp/juniper_ex2200.config
msf5 auxiliary(admin/networking/gather/juniper_config) > set rhost 127.0.0.1
rhost => 127.0.0.1
msf5 auxiliary(admin/networking/gather/juniper_config) > run
[*] Running module against 127.0.0.1
[*] Importing config
[+] root password hash: $1$pz9b1.fq$foo5r85Ql8mXdoRUe0C1E.
[+] User 2000 named newuser in group super-user found with password hash $1$rm8FaMFY$k4LFxqsVAiGO5tKqyO9jJ/.
[+] User 2002 named newuser2 in group operator found with password hash $1$aDZi44AP$bQGGjqPJ.F.Cm5QvX2yaa0.
[+] User 2003 named newuser3 in group read-only found with password hash $1$1.YvKzUY$dcAj99KngGhFZTpxGjA93..
[+] User 2004 named newuser4 in group unauthorized found with password hash $1$bdWYaqOE$z6oTSJS3p1R8CoNaos9Ce/.
[+] SNMP community read with permissions read-only
[+] SNMP community public with permissions read-only
[+] SNMP community private with permissions read-write
[+] SNMP community secretsauce with permissions read-write
[+] SNMP community hello there with permissions read-write
[+] radius server 1.1.1.1 password hash: $9$Y-4GikqfF39JGCu1Ileq.PQ6AB1hrlMBIyKvWdV
[+] PPTP username 'pap_username' hash $9$he4revM87-dsevm5TQCAp0BErvLxd4JDNdkPfT/9BIR via PAP
[+] Config import successful
[*] Auxiliary module execution completed
ScreenOS
root@metasploit-dev:~/metasploit-framework# wget -o /dev/null -O /tmp/screenos.conf https://raw.githubusercontent.com/h00die/MSF-Testing-Scripts/master/juniper_ssg5_screenos.conf
root@metasploit-dev:~/metasploit-framework# ./msfconsole
[*] Starting persistent handler(s)...
msf5 > use auxiliary/admin/networking/gather/juniper_config
msf5 auxiliary(admin/networking/gather/juniper_config) > set config /tmp/screenos.conf
config => /tmp/screenos.conf
msf5 auxiliary(admin/networking/gather/juniper_config) > set rhost 127.0.0.1
rhost => 127.0.0.1
msf5 auxiliary(admin/networking/gather/juniper_config) > set action SCREENOS
action => SCREENOS
msf5 auxiliary(admin/networking/gather/juniper_config) > run
[*] Running module against 127.0.0.1
[*] Importing config
[+] Admin user netscreen found with password hash nKVUM2rwMUzPcrkG5sWIHdCtqkAibn
[+] User 1 named testuser found with password hash auth. Enable permission: 02b0jt2gZGipCiIEgl4eainqZIKzjSNQYLIwE=
[+] Config import successful
[*] Auxiliary module execution completed
Go back to menu.
Msfconsole Usage
Here is how the admin/networking/juniper_config auxiliary module looks in the msfconsole:
msf6 > use auxiliary/admin/networking/juniper_config
msf6 auxiliary(admin/networking/juniper_config) > show info
Name: Juniper Configuration Importer
Module: auxiliary/admin/networking/juniper_config
License: Metasploit Framework License (BSD)
Rank: Normal
Provided by:
h00die
Available actions:
Name Description
---- -----------
JUNOS Import JunOS Config File
SCREENOS Import ScreenOS Config File
Check supported:
No
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
CONFIG yes Path to configuration to import
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 22 yes The target port
Description:
This module imports a Juniper ScreenOS or JunOS device
configuration.
Module Options
This is a complete list of options available in the admin/networking/juniper_config auxiliary module:
msf6 auxiliary(admin/networking/juniper_config) > show options
Module options (auxiliary/admin/networking/juniper_config):
Name Current Setting Required Description
---- --------------- -------- -----------
CONFIG yes Path to configuration to import
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 22 yes The target port
Auxiliary action:
Name Description
---- -----------
JUNOS Import JunOS Config File
Advanced Options
Here is a complete list of advanced options supported by the admin/networking/juniper_config auxiliary module:
msf6 auxiliary(admin/networking/juniper_config) > show advanced
Module advanced options (auxiliary/admin/networking/juniper_config):
Name Current Setting Required Description
---- --------------- -------- -----------
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
Auxiliary Actions
This is a list of all auxiliary actions that the admin/networking/juniper_config module can do:
msf6 auxiliary(admin/networking/juniper_config) > show actions
Auxiliary actions:
Name Description
---- -----------
JUNOS Import JunOS Config File
SCREENOS Import ScreenOS Config File
Evasion Options
Here is the full list of possible evasion options supported by the admin/networking/juniper_config auxiliary module in order to evade defenses (e.g. Antivirus, EDR, Firewall, NIDS etc.):
msf6 auxiliary(admin/networking/juniper_config) > show evasion
Module evasion options:
Name Current Setting Required Description
---- --------------- -------- -----------
Go back to menu.
Error Messages
This module may fail with the following error messages:
Error Messages
Check for the possible causes from the code snippets below found in the module source code. This can often times help in identifying the root cause of the problem.
Juniper config file <CONFIG> does not exist!
Here is a relevant code snippet related to the "Juniper config file <CONFIG> does not exist!" error message:
35: )
36: end
37:
38: def run
39: unless ::File.exist?(datastore['CONFIG'])
40: fail_with Failure::BadConfig, "Juniper config file #{datastore['CONFIG']} does not exist!"
41: end
42: juniper_config = ::File.open(datastore['CONFIG'], 'rb')
43: print_status('Importing config')
44: if action.name == 'JUNOS'
45: juniper_junos_config_eater(datastore['RHOSTS'], datastore['RPORT'], juniper_config.read)
Go back to menu.
Related Pull Requests
- #15192 Merged Pull Request: Enforce Style/RedundantBegin for new modules
- #14734 Merged Pull Request: Rubocop recently landed modules
- #14202 Merged Pull Request: Implement the zeitwerk autoloader within lib/msf/core
- #14031 Merged Pull Request: F5 processor
- #13870 Merged Pull Request: Arista processor
- #13750 Merged Pull Request: Centralize networking
Go back to menu.
See Also
Check also the following modules related to this module:
- auxiliary/scanner/ssh/juniper_backdoor
- exploit/windows/browser/juniper_sslvpn_ive_setupdll
- post/networking/gather/enum_juniper
- auxiliary/admin/networking/arista_config
- auxiliary/admin/networking/brocade_config
- auxiliary/admin/networking/cisco_asa_extrabacon
- auxiliary/admin/networking/cisco_config
- auxiliary/admin/networking/cisco_dcnm_auth_bypass
- auxiliary/admin/networking/cisco_dcnm_download
- auxiliary/admin/networking/cisco_secure_acs_bypass
- auxiliary/admin/networking/cisco_vpn_3000_ftp_bypass
- auxiliary/admin/networking/f5_config
- auxiliary/admin/networking/mikrotik_config
- auxiliary/admin/networking/ubiquiti_config
- auxiliary/admin/networking/vyos_config
- auxiliary/admin/misc/sercomm_dump_config
- auxiliary/gather/cisco_pvc2300_download_config
- auxiliary/gather/cisco_rv320_config
- auxiliary/scanner/http/epmp1000_dump_config
- auxiliary/admin/citrix/citrix_netscaler_config_decrypt
- auxiliary/admin/sap/sap_configservlet_exec_noauth
- auxiliary/scanner/http/binom3_login_config_pass_dump
- auxiliary/scanner/misc/dvr_config_disclosure
- auxiliary/scanner/snmp/cisco_config_tftp
- exploit/linux/http/op5_config_exec
- exploit/linux/local/vmware_alsa_config
- exploit/multi/browser/opera_configoverwrite
- exploit/multi/http/zenworks_configuration_management_upload
- exploit/unix/webapp/awstats_configdir_exec
- exploit/unix/webapp/freepbx_config_exec
- exploit/unix/webapp/phpmyadmin_config
- exploit/windows/http/sap_configservlet_exec_noauth
- post/linux/gather/enum_configs
Authors
- h00die
Version
This page has been produced using Metasploit Framework version 6.2.23-dev. For more modules, visit the Metasploit Module Library.
Go back to menu.
