Linux Mettle x86, Reverse TCP Stager (IPv6) - Metasploit
This page contains detailed information about how to use the payload/linux/x86/meterpreter/reverse_ipv6_tcp metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.
Module Overview
Name: Linux Mettle x86, Reverse TCP Stager (IPv6)
Module: payload/linux/x86/meterpreter/reverse_ipv6_tcp
Source code: modules/payloads/stagers/linux/x86/reverse_ipv6_tcp.rb
Disclosure date: -
Last modification time: 2020-09-22 02:56:51 +0000
Supported architecture(s): x86
Supported platform(s): Linux, Linux
Target service / protocol: -
Target network port(s): -
List of CVEs: -
Inject the mettle server payload (staged). Connect back to attacker over IPv6
Module Ranking and Traits
Module Ranking:
- normal: The exploit is otherwise reliable, but depends on a specific version and can't (or doesn't) reliably autodetect. More information about ranking can be found here.
Basic Usage
msf > use payload/linux/x86/meterpreter/reverse_ipv6_tcp
msf payload(reverse_ipv6_tcp) > show options
... show and set options ...
msf payload(reverse_ipv6_tcp) > generate
To learn how to generate payload/linux/x86/meterpreter/reverse_ipv6_tcp with msfvenom, please read this.
Required Options
- LHOST: The listen address (an interface may be specified)
Go back to menu.
Msfconsole Usage
Here is how the linux/x86/meterpreter/reverse_ipv6_tcp payload looks in the msfconsole:
msf6 > use payload/linux/x86/meterpreter/reverse_ipv6_tcp
msf6 payload(linux/x86/meterpreter/reverse_ipv6_tcp) > show info
Name: Linux Mettle x86, Reverse TCP Stager (IPv6)
Module: payload/linux/x86/meterpreter/reverse_ipv6_tcp
Platform: Linux, Linux
Arch: x86
Needs Admin: No
Total size: 77
Rank: Normal
Provided by:
William Webb <[email protected]>
kris katterjohn <[email protected]>
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
SCOPEID 0 no IPv6 scope ID, for link-local addresses
Description:
Inject the mettle server payload (staged). Connect back to attacker
over IPv6
Module Options
This is a complete list of options available in the linux/x86/meterpreter/reverse_ipv6_tcp payload:
msf6 payload(linux/x86/meterpreter/reverse_ipv6_tcp) > show options
Module options (payload/linux/x86/meterpreter/reverse_ipv6_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
SCOPEID 0 no IPv6 scope ID, for link-local addresses
Advanced Options
Here is a complete list of advanced options supported by the linux/x86/meterpreter/reverse_ipv6_tcp payload:
msf6 payload(linux/x86/meterpreter/reverse_ipv6_tcp) > show advanced
Module advanced options (payload/linux/x86/meterpreter/reverse_ipv6_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
AppendExit false no Append a stub that executes the exit(0) system call
AutoLoadStdapi true yes Automatically load the Stdapi extension
AutoRunScript no A script to run automatically on session creation.
AutoSystemInfo true yes Automatically capture system information on initialization.
AutoUnhookProcess false yes Automatically load the unhook extension and unhook the process
AutoVerifySessionTimeout 30 no Timeout period to wait for session validation to occur, in seconds
EnableStageEncoding false no Encode the second stage payload
EnableUnicodeEncoding false yes Automatically encode UTF-8 strings as hexadecimal
HandlerSSLCert no Path to a SSL certificate in unified PEM format, ignored for HTTP transports
InitialAutoRunScript no An initial script to run on session creation (before AutoRunScript)
MeterpreterDebugLevel 0 yes Set debug level for meterpreter 0-3 (Default output is strerr)
PayloadProcessCommandLine no The displayed command line that will be used by the payload
PayloadUUIDName no A human-friendly name to reference this unique payload (requires tracking)
PayloadUUIDRaw no A hex string representing the raw 8-byte PUID value for the UUID
PayloadUUIDSeed no A string to use when generating the payload UUID (deterministic)
PayloadUUIDTracking false yes Whether or not to automatically register generated UUIDs
PingbackRetries 0 yes How many additional successful pingbacks
PingbackSleep 30 yes Time (in seconds) to sleep between pingbacks
PrependChrootBreak false no Prepend a stub that will break out of a chroot (includes setreuid to root)
PrependFork false no Prepend a stub that starts the payload in its own process via fork
PrependSetgid false no Prepend a stub that executes the setgid(0) system call
PrependSetregid false no Prepend a stub that executes the setregid(0, 0) system call
PrependSetresgid false no Prepend a stub that executes the setresgid(0, 0, 0) system call
PrependSetresuid false no Prepend a stub that executes the setresuid(0, 0, 0) system call
PrependSetreuid false no Prepend a stub that executes the setreuid(0, 0) system call
PrependSetuid false no Prepend a stub that executes the setuid(0) system call
RemoteMeterpreterDebugFile no Redirect Debug Info to a Log File
ReverseAllowProxy false yes Allow reverse tcp even with Proxies specified. Connect back will NOT go through proxy but directly to LHOST
ReverseListenerBindAddress no The specific IP address to bind to on the local system
ReverseListenerBindPort no The port to bind to on the local system if different from LPORT
ReverseListenerComm no The specific communication channel to use for this listener
ReverseListenerThreaded false yes Handle every connection in a new thread (experimental)
SessionCommunicationTimeout 300 no The number of seconds of no activity before this session should be killed
SessionExpirationTimeout 604800 no The number of seconds before this session should be forcibly shut down
SessionRetryTotal 3600 no Number of seconds try reconnecting for on network failure
SessionRetryWait 10 no Number of seconds to wait between reconnect attempts
StageEncoder no Encoder to use if EnableStageEncoding is set
StageEncoderSaveRegisters no Additional registers to preserve in the staged payload if EnableStageEncoding is set
StageEncodingFallback true no Fallback to no encoding if the selected StageEncoder is not compatible
StagerRetryCount 10 no The number of times the stager should retry if the first connect fails
StagerRetryWait 5 no Number of seconds to wait for the stager between reconnect attempts
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
Go back to menu.
Related Pull Requests
- #14584 Merged Pull Request: Implement the zeitwerk autoloader within lib/msf/base
- #12271 Merged Pull Request: Linux reverse_tcp should read known # of bytes
- #8337 Merged Pull Request: set the correct schema for linux meterpreter reverse_tcp stages
- #8279 Merged Pull Request: move mettle payloads to meterpreter, add reverse_http/s stageless
- #7634 Merged Pull Request: Implement universal HTTP/S handlers for Meterpreter payloads
- #6655 Merged Pull Request: use MetasploitModule as a class name
- #5367 Merged Pull Request: Create new UUID stagers
- #5300 Merged Pull Request: Multi transport support, connection resiliency changes, payload ports, and more
- #5214 Merged Pull Request: Connection recovery
- #2525 Merged Pull Request: Change module boilerplate
- #2426 Merged Pull Request: Find and replace Msf::Config.install_root, "data"
- #1241 Merged Pull Request: Removed all $Id$ and $Revision$ occurences
Go back to menu.
See Also
Check also the following modules related to this module:
- payload/linux/x86/adduser
- payload/linux/x86/chmod
- payload/linux/x86/exec
- payload/linux/x86/meterpreter/bind_ipv6_tcp
- payload/linux/x86/meterpreter/bind_ipv6_tcp_uuid
- payload/linux/x86/meterpreter/bind_nonx_tcp
- payload/linux/x86/meterpreter/bind_tcp
- payload/linux/x86/meterpreter/bind_tcp_uuid
- payload/linux/x86/meterpreter/find_tag
- payload/linux/x86/meterpreter_reverse_http
- payload/linux/x86/meterpreter_reverse_https
- payload/linux/x86/meterpreter/reverse_nonx_tcp
- payload/linux/x86/meterpreter/reverse_tcp
- payload/linux/x86/meterpreter_reverse_tcp
- payload/linux/x86/meterpreter/reverse_tcp_uuid
- payload/linux/x86/metsvc_bind_tcp
- payload/linux/x86/metsvc_reverse_tcp
- payload/linux/x86/read_file
- payload/linux/x86/shell/bind_ipv6_tcp
- payload/linux/x86/shell_bind_ipv6_tcp
- payload/linux/x86/shell/bind_ipv6_tcp_uuid
- payload/linux/x86/shell/bind_nonx_tcp
- payload/linux/x86/shell/bind_tcp
- payload/linux/x86/shell_bind_tcp
- payload/linux/x86/shell_bind_tcp_random_port
- payload/linux/x86/shell/bind_tcp_uuid
- payload/linux/x86/shell_find_port
- payload/linux/x86/shell/find_tag
- payload/linux/x86/shell_find_tag
- payload/linux/x86/shell/reverse_ipv6_tcp
- payload/linux/x86/shell/reverse_nonx_tcp
- payload/linux/x86/shell/reverse_tcp
- payload/linux/x86/shell_reverse_tcp
- payload/linux/x86/shell_reverse_tcp_ipv6
- payload/linux/x86/shell/reverse_tcp_uuid
Authors
- William Webb <william_webb[at]rapid7.com>
- kris katterjohn
Version
This page has been produced using Metasploit Framework version 6.1.24-dev. For more modules, visit the Metasploit Module Library.
Go back to menu.