Cisco Firepower Management Console 6.0 Login - Metasploit
This page contains detailed information about how to use the auxiliary/scanner/http/cisco_firepower_login metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.
Module Overview
Name: Cisco Firepower Management Console 6.0 Login
Module: auxiliary/scanner/http/cisco_firepower_login
Source code: modules/auxiliary/scanner/http/cisco_firepower_login.rb
Disclosure date: -
Last modification time: 2021-08-31 17:10:07 +0000
Supported architecture(s): -
Supported platform(s): -
Target service / protocol: http, https
Target network port(s): 80, 443, 3000, 8000, 8008, 8080, 8443, 8880, 8888
List of CVEs: -
This module attempts to authenticate to a Cisco Firepower Management console via HTTPS. The credentials are also used for SSH, which could allow remote code execution.
Module Ranking and Traits
Module Ranking:
- normal: The exploit is otherwise reliable, but depends on a specific version and can't (or doesn't) reliably autodetect. More information about ranking can be found here.
Basic Usage
This module is a scanner module, and is capable of testing against multiple hosts.
msf > use auxiliary/scanner/http/cisco_firepower_login
msf auxiliary(cisco_firepower_login) > show options
... show and set options ...
msf auxiliary(cisco_firepower_login) > set RHOSTS ip-range
msf auxiliary(cisco_firepower_login) > exploit
Other examples of setting the RHOSTS option:
Example 1:
msf auxiliary(cisco_firepower_login) > set RHOSTS 192.168.1.3-192.168.1.200
Example 2:
msf auxiliary(cisco_firepower_login) > set RHOSTS 192.168.1.1/24
Example 3:
msf auxiliary(cisco_firepower_login) > set RHOSTS file:/tmp/ip_list.txt
Required Options
- RHOSTS: The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
Knowledge Base
This module allows you to authenticate to Cisco Firepower Management console. The found credentials could also be used in Cisco Firepower's SSH service, which would potentially give you remote code execution.
Vulnerable Application
The vulnerable software can be downloaded from Cisco as long as you are a member. Specifically, this module was testing on version 6.0.1 during development.
For Cisco members, get the virtual appliance 6.0.1-2013 here:
https://software.cisco.com/download/release.html?mdfid=286259687&softwareid=286271056&release=6.0.1&flowid=54052
Verification Steps
- Make sure Cisco Firepower Management console's HTTPS service is running
- Start
msfconsole
use auxiliary/scanner/http/cisco_firepower_login.rb
set RHOSTS [IP]
- Set credentials
run
- You should see that the module is attempting to log in.
Go back to menu.
Msfconsole Usage
Here is how the scanner/http/cisco_firepower_login auxiliary module looks in the msfconsole:
msf6 > use auxiliary/scanner/http/cisco_firepower_login
msf6 auxiliary(scanner/http/cisco_firepower_login) > show info
Name: Cisco Firepower Management Console 6.0 Login
Module: auxiliary/scanner/http/cisco_firepower_login
License: Metasploit Framework License (BSD)
Rank: Normal
Provided by:
sinn3r <[email protected]>
Check supported:
No
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
BLANK_PASSWORDS false no Try blank passwords for all users
BRUTEFORCE_SPEED 5 yes How fast to bruteforce, from 0 to 5
DB_ALL_CREDS false no Try each user/password couple stored in the current database
DB_ALL_PASS false no Add all passwords in the current database to the list
DB_ALL_USERS false no Add all users in the current database to the list
PASSWORD no A specific password to authenticate with
PASS_FILE no File containing passwords, one per line
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 443 yes The target port (TCP)
SSL true no Negotiate SSL/TLS for outgoing connections
STOP_ON_SUCCESS false yes Stop guessing when a credential works for a host
TARGETURI / yes The base path to Cisco Firepower Management console
THREADS 1 yes The number of concurrent threads (max one per host)
TRYDEFAULT false no Try the default credential admin:Admin123
USERNAME no A specific username to authenticate as
USERPASS_FILE no File containing users and passwords separated by space, one pair per line
USER_AS_PASS false no Try the username as the password for all users
USER_FILE no File containing usernames, one per line
VERBOSE true yes Whether to print output for all attempts
VHOST no HTTP server virtual host
Description:
This module attempts to authenticate to a Cisco Firepower Management
console via HTTPS. The credentials are also used for SSH, which
could allow remote code execution.
Module Options
This is a complete list of options available in the scanner/http/cisco_firepower_login auxiliary module:
msf6 auxiliary(scanner/http/cisco_firepower_login) > show options
Module options (auxiliary/scanner/http/cisco_firepower_login):
Name Current Setting Required Description
---- --------------- -------- -----------
BLANK_PASSWORDS false no Try blank passwords for all users
BRUTEFORCE_SPEED 5 yes How fast to bruteforce, from 0 to 5
DB_ALL_CREDS false no Try each user/password couple stored in the current database
DB_ALL_PASS false no Add all passwords in the current database to the list
DB_ALL_USERS false no Add all users in the current database to the list
PASSWORD no A specific password to authenticate with
PASS_FILE no File containing passwords, one per line
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 443 yes The target port (TCP)
SSL true no Negotiate SSL/TLS for outgoing connections
STOP_ON_SUCCESS false yes Stop guessing when a credential works for a host
TARGETURI / yes The base path to Cisco Firepower Management console
THREADS 1 yes The number of concurrent threads (max one per host)
TRYDEFAULT false no Try the default credential admin:Admin123
USERNAME no A specific username to authenticate as
USERPASS_FILE no File containing users and passwords separated by space, one pair per line
USER_AS_PASS false no Try the username as the password for all users
USER_FILE no File containing usernames, one per line
VERBOSE true yes Whether to print output for all attempts
VHOST no HTTP server virtual host
Advanced Options
Here is a complete list of advanced options supported by the scanner/http/cisco_firepower_login auxiliary module:
msf6 auxiliary(scanner/http/cisco_firepower_login) > show advanced
Module advanced options (auxiliary/scanner/http/cisco_firepower_login):
Name Current Setting Required Description
---- --------------- -------- -----------
DOMAIN WORKSTATION yes The domain to use for Windows authentication
DigestAuthIIS true no Conform to IIS, should work for most servers. Only set to false for non-IIS servers
FingerprintCheck true no Conduct a pre-exploit fingerprint verification
HttpClientTimeout no HTTP connection and receive timeout
HttpPassword no The HTTP password to specify for authentication
HttpRawHeaders no Path to ERB-templatized raw headers to append to existing headers
HttpTrace false no Show the raw HTTP requests and responses
HttpTraceColors red/blu no HTTP request and response colors for HttpTrace (unset to disable)
HttpTraceHeadersOnly false no Show HTTP headers only in HttpTrace
HttpUsername no The HTTP username to specify for authentication
MaxGuessesPerService 0 no Maximum number of credentials to try per service instance. If set to zero or a non-number, this option will not be used.
MaxGuessesPerUser 0 no Maximum guesses for a particular username for the service instance. Note that users are considered unique among different services, so a user at 10.1.1.1:22
is different from one at 10.2.2.2:22, and both will be tried up to the MaxGuessesPerUser limit. If set to zero or a non-number, this option will not be use
d.
MaxMinutesPerService 0 no Maximum time in minutes to bruteforce the service instance. If set to zero or a non-number, this option will not be used.
REMOVE_PASS_FILE false yes Automatically delete the PASS_FILE on module completion
REMOVE_USERPASS_FILE false yes Automatically delete the USERPASS_FILE on module completion
REMOVE_USER_FILE false yes Automatically delete the USER_FILE on module completion
SSLVersion Auto yes Specify the version of SSL/TLS to be used (Auto, TLS and SSL23 are auto-negotiate) (Accepted: Auto, TLS, SSL23, SSL3, TLS1, TLS1.1, TLS1.2)
ShowProgress true yes Display progress messages during a scan
ShowProgressPercent 10 yes The interval in percent that progress should be shown
TRANSITION_DELAY 0 no Amount of time (in minutes) to delay before transitioning to the next user in the array (or password when PASSWORD_SPRAY=true)
UserAgent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1) no The User-Agent header to use for all requests
WORKSPACE no Specify the workspace for this module
Auxiliary Actions
This is a list of all auxiliary actions that the scanner/http/cisco_firepower_login module can do:
msf6 auxiliary(scanner/http/cisco_firepower_login) > show actions
Auxiliary actions:
Name Description
---- -----------
Evasion Options
Here is the full list of possible evasion options supported by the scanner/http/cisco_firepower_login auxiliary module in order to evade defenses (e.g. Antivirus, EDR, Firewall, NIDS etc.):
msf6 auxiliary(scanner/http/cisco_firepower_login) > show evasion
Module evasion options:
Name Current Setting Required Description
---- --------------- -------- -----------
HTTP::header_folding false no Enable folding of HTTP headers
HTTP::method_random_case false no Use random casing for the HTTP method
HTTP::method_random_invalid false no Use a random invalid, HTTP method for request
HTTP::method_random_valid false no Use a random, but valid, HTTP method for request
HTTP::pad_fake_headers false no Insert random, fake headers into the HTTP request
HTTP::pad_fake_headers_count 0 no How many fake headers to insert into the HTTP request
HTTP::pad_get_params false no Insert random, fake query string variables into the request
HTTP::pad_get_params_count 16 no How many fake query string variables to insert into the request
HTTP::pad_method_uri_count 1 no How many whitespace characters to use between the method and uri
HTTP::pad_method_uri_type space no What type of whitespace to use between the method and uri (Accepted: space, tab, apache)
HTTP::pad_post_params false no Insert random, fake post variables into the request
HTTP::pad_post_params_count 16 no How many fake post variables to insert into the request
HTTP::pad_uri_version_count 1 no How many whitespace characters to use between the uri and version
HTTP::pad_uri_version_type space no What type of whitespace to use between the uri and version (Accepted: space, tab, apache)
HTTP::uri_dir_fake_relative false no Insert fake relative directories into the uri
HTTP::uri_dir_self_reference false no Insert self-referential directories into the uri
HTTP::uri_encode_mode hex-normal no Enable URI encoding (Accepted: none, hex-normal, hex-noslashes, hex-random, hex-all, u-normal, u-all, u-random)
HTTP::uri_fake_end false no Add a fake end of URI (eg: /%20HTTP/1.0/../../)
HTTP::uri_fake_params_start false no Add a fake start of params to the URI (eg: /%3fa=b/../)
HTTP::uri_full_url false no Use the full URL for all HTTP requests
HTTP::uri_use_backslashes false no Use back slashes instead of forward slashes in the uri
HTTP::version_random_invalid false no Use a random invalid, HTTP version for request
HTTP::version_random_valid false no Use a random, but valid, HTTP version for request
Go back to menu.
Error Messages
This module may fail with the following error messages:
Check for the possible causes from the code snippets below found in the module source code. This can often times help in identifying the root cause of the problem.
Failed: '<RESULT.CREDENTIAL>'
Here is a relevant code snippet related to the "Failed: '<RESULT.CREDENTIAL>'" error message:
118: report_good_cred(ip, rport, result)
119: when Metasploit::Model::Login::Status::UNABLE_TO_CONNECT
120: vprint_brute(:level => :verror, :ip => ip, :msg => result.proof)
121: report_bad_cred(ip, rport, result)
122: when Metasploit::Model::Login::Status::INCORRECT
123: vprint_brute(:level => :verror, :ip => ip, :msg => "Failed: '#{result.credential}'")
124: report_bad_cred(ip, rport, result)
125: end
126: end
127: end
128:
Target is not Cisco Firepower Management console.
Here is a relevant code snippet related to the "Target is not Cisco Firepower Management console." error message:
126: end
127: end
128:
129: def run_host(ip)
130: unless scanner(ip).check_setup
131: print_brute(:level => :error, :ip => ip, :msg => 'Target is not Cisco Firepower Management console.')
132: return
133: end
134:
135: bruteforce(ip)
136: end
Go back to menu.
Related Pull Requests
- #12022 Merged Pull Request: Deregister PASSWORD_SPRAY option for LoginScanner modules
- #8716 Merged Pull Request: Print_Status -> Print_Good (And OCD bits 'n bobs)
- #8338 Merged Pull Request: Fix msf/core and self.class msftidy warnings
- #7827 Merged Pull Request: Add Cisco Firepower Management Console LoginScanner
Go back to menu.
See Also
Check also the following modules related to this module:
- auxiliary/scanner/http/cisco_asa_asdm
- auxiliary/scanner/http/cisco_asa_asdm_bruteforce
- auxiliary/scanner/http/cisco_asa_clientless_vpn
- auxiliary/scanner/http/cisco_device_manager
- auxiliary/scanner/http/cisco_directory_traversal
- auxiliary/scanner/http/cisco_firepower_download
- auxiliary/scanner/http/cisco_ios_auth_bypass
- auxiliary/scanner/http/cisco_ironport_enum
- auxiliary/scanner/http/cisco_nac_manager_traversal
- auxiliary/scanner/http/cisco_ssl_vpn
- auxiliary/scanner/http/cisco_ssl_vpn_priv_esc
- auxiliary/scanner/ike/cisco_ike_benigncertain
- auxiliary/scanner/misc/cisco_smart_install
- auxiliary/scanner/snmp/cisco_config_tftp
- auxiliary/scanner/snmp/cisco_upload_file
- auxiliary/admin/http/cisco_7937g_ssh_privesc
- auxiliary/admin/networking/cisco_asa_extrabacon
- auxiliary/admin/networking/cisco_config
- auxiliary/admin/networking/cisco_dcnm_auth_bypass
- auxiliary/admin/networking/cisco_dcnm_download
- auxiliary/admin/networking/cisco_secure_acs_bypass
- auxiliary/admin/networking/cisco_vpn_3000_ftp_bypass
- auxiliary/dos/cisco/cisco_7937g_dos
- auxiliary/dos/cisco/cisco_7937g_dos_reboot
- auxiliary/gather/cisco_pvc2300_download_config
- auxiliary/gather/cisco_rv320_config
- auxiliary/voip/cisco_cucdm_call_forward
- auxiliary/voip/cisco_cucdm_speed_dials
- auxiliary/dos/cisco/ios_http_percentpercent
- auxiliary/dos/cisco/ios_telnet_rocem
- auxiliary/spoof/cisco/cdp
- auxiliary/spoof/cisco/dtp
- exploit/dialup/multi/login/manyargs
- exploit/linux/http/cisco_firepower_useradd
Authors
- sinn3r
Version
This page has been produced using Metasploit Framework version 6.2.23-dev. For more modules, visit the Metasploit Module Library.
Go back to menu.